Professional Documents
Culture Documents
RANGE
IRRIGATION
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
2 5 8
1 3 5
2 3
6
1 2 3 4 5
FEATURES FEATURES
BIR VIR Pressure Flow rate
CORELY
Irrigation hydrant Irrigation valve reducer limiter
2 Technical data and performance are subject to change without prior notice depending on the technical advances.
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
4
1 3 5
6 7 8 9
NETWORK EQUIPMENT
6 7 8 9 9
FEATURES FEATURES
Resilient seated Centric butterfly
Air valve DJET valve Control valve
gate valves valves
SAFETY VALVE
- DJET DN 40 to 200
CONTROL VALVE
- RAF - DN25-400
- RAF P- DN40-100
- ULTRAF- DN40-200
Technical data and performance are subject to change without prior notice depending on the technical advances. 3
IRRIGATION HYDRANT
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
4 Technical data and performance are subject to change without prior notice depending on the technical advances.
IRRIGATION HYDRANT
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
OPTIMISED METROLOGY PRECISE CONTROLLER
Technical data and performance are subject to change without prior notice depending on the technical advances. 5
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
IRRIGATION HYDRANT
BIR irrigation hydrants are designed to distribute large
volumes of raw water.
The range consists of several models (DN 80 to 150). The
choice of model is multifactorial: the number of users to be
connected and their need in terms of flow.
Depending on their configuration, 1 to 4 users can be
connected. This capacity can be further increased by
adapting the outlets.
MARKETS BENEFITS
DESIGN
Ø 350
DISTRIBUTION
RAW WATER Robust for use with all grades of water Blanking
plate
SECURITY
Protects the water system against water hammer
TECHNICAL DATA L
MAINTENANCE
H
H'
Flange connection Facilitated by access to all components from above
ISO PN 10/16 without digging
Specific outlet fitting
(triangular or square flange)
Short version with automatic ROBUST
drain option Use of stainless steel and bronze
Long, frost-free version for the most exposed components DN
KEY FEATURES
Type BIR
82/65 102/65 104/65 102/100 152/100-150
DN inlet 80 100 100 100 150
Number 2 2 4 2 2
Outlets
DN 65 65 65 100 100 or 150
Handwheel diameter 350 350 350 350 350
Torque Nm at 16 bar 30 60 60 60 60
Number of turns 13 22 22 22 22
Short H mm 715 715 715 715 715
Version
H' mm 560 500 500 565 615
Short H mm 1290 1310 1310 1310 1360
Version
H' mm 1030 1055 1055 1055 1110
L mm 105 105 105 145 145
Weight kg 57 68 69 72 78
6 Technical data and performance are subject to change without prior notice depending on the technical advances.
IRRIGATION HYDRANT
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
D2 20 SERIES
The hydrant is configurable:
KEY FEATURES
DN CORELY sockets QNB(B) flow rate Max Flow
hydrant body inlet DN 65 DN 100 DN 150 specified by the CCTG 1.5xQNB(B)
41/65 40 1 - - 20 m3/h(C) 30 m3/h
82/65 80 1 to 2 - - 40 m3/h 60 m3/h
102/65 100 1 to 2 - - 80 m3/h 120 m3/h
104/65 100 1 to 4 - - 80 m /h
3
120 m3/h
- 1 to 2 - 80 m3/h 120 m3/h
102 / 100 100
1à4 (A)
- - 80 m /h
3
120 m3/h
- 1 to 2 - 120 m3/h 180 m3/h
- - 1 to 2 120 m /h
3
180 m3/h
152 / 100 - 150 150 - 1 1 120 m3/h 180 m3/h
1 (A)
and 1 or 1 120 m /h
3
180 m3/h
2(A) and 1 or 1 120 m3/h 180 m3/h
(A)
With a conversion sleeve
(B)
QNB = Sum of the maximum flow rates of the simultaneously operating outlets
(C)
Excluding CCTG
Technical data and performance are subject to change without prior notice depending on the technical advances. 7
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
IRRIGATION HYDRANT
The VIR DN 40 irrigation hydrants are suitable for the
distribution of raw water to a private individual or a small plot
of land.
Its use is suitable for flow rates up to 30 m3/h.
MARKETS BENEFITS
DISTRIBUTION DESIGN
RAW WATER Compact for 1 user
175
PFA 20 bar
H'
Flange pipe connection Use of high-quality materials for the most exposed
DN 40 ISO PN 10/16 components
Specific outlet fitting
(triangular flange)
Maximum flow rate 30 m3/h
COATING
Automatic draining option Cataphoresis primer coating and green polyester
topcoat
KEY FEATURES
VIR 41/65
DN inlet 40
Number 1
Outlet
DN 65
Handwheel diameter 175
Operating torque in Nm at 16 bar 30
Number of turns 5
H mm 280
Height
H' mm 200
L mm 108
Weight kg 11.2
8 Technical data and performance are subject to change without prior notice depending on the technical advances.
IRRIGATION HYDRANT
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
The DN 100 VIR irrigation hydrants are suitable for the distri-
bution of very large quantities of raw water.
Its use is suitable for flow rates up to 180 m3/h.
MARKETS BENEFITS
DISTRIBUTION DESIGN
OF RAW WATER Compact for connecting 1 to 2 users
MAINTENANCE
Easy access to all components from above
TECHNICAL DATA
ROBUST
H
DN 100
PFA 20 bar, 25 on request
Flange connection Use of stainless steel and bronze for the
H'
DN 100 ISO PN 10/16 most exposed components
Outlet connection
DN 100 ISO PN10/16
Maximum flow rate 180 m3/h
COATING 350
Automatic air vent option Cataphoresis primer coating and green polyester
topcoat
KEY FEATURES
VIR 102/100
DN inlet 100
Number 2
Outlet
DN 100
Handwheel diameter 350
Operating torque in Nm at 16 bar 60
Number of turns 22
H mm 495
Height
H' mm 200
L mm 350
Weight kg 46
Technical data and performance are subject to change without prior notice depending on the technical advances. 9
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
CORELY OUTLET
CORELY outlets are a key element in the network management.
The water meter, pressure reducer and flow limiter are com-
bined in one device.
MARKETS BENEFITS
RAW WATER DESIGN
DISTRIBUTION Designed for use with all grades of water
MAINTENANCE
reduced thanks to robust design
TECHNICAL DATA
DN 65, 100 and 150
DURABLE
PFA 25 bar, Stainless steel and bronze are used for the most exposed components
Upstream connection by
DIMENSIONS:
specific triangular or square
flange,
Output connection:
- Symmetrical
E
- ISO flange DN 65
- Threaded
Pressure tap
B
C
D
A
C
D A
DN A B C D E Weight
mm mm mm mm mm kg
65 295 89 210 175 195 11.5
100 375 0 250 195 340 30
150 437 0 280 215 385 47
10 Technical data and performance are subject to change without prior notice depending on the technical advances.
CORELY OUTLET
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
CORELY itself is scalable:
Recommendations:
The sum of the individual flow rates (QNL) must remain less than or equal to the nominal
flow rate of the hydrant.
However, where the available head loss at the hydrant base is significant, the maximum
permissible flow rate is 1.5 x QNB.
The flow limiter of each outlet must be chosen so that QNL ≥ to the flow rate required by
the equipment being supplied.
Technical data and performance are subject to change without prior notice depending on the technical advances. 11
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
FLOW LIMITER
The insertable flow limiter has several functions and is essen-
tial for the network to function properly.
- The flow rate limiter ensures that the value purchased by
the user is in line with the flow rate delivered,
- It distributes network capacity to each distribution point,
- It protects the water meter against overflow.
MARKETS BENEFITS
RAW WATER DESIGN
DISTRIBUTION Durable for use with all grades of water
SECURITY
It guarantees available flow for all network users
TECHNICAL DATA
DN 65, 80, 100, 150 and 200
Size from 5 to 320 m3/h
MAINTENANCE
PFA 20 bar Facilitated by direct access to components
To be integrated or inserted
between 2 flanges
Also available in special
low-pressure versions
ROBUST
Use of stainless steel and a PVC nozzle for the most exposed components
12 Technical data and performance are subject to change without prior notice depending on the technical advances.
FLOW LIMITER
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
Regulation curve of a CORELY.
Example with a downstream pressure set at 6 bar and flow
limiter calibrated at 30 m³/h.
P in bar
10
rate
ro flow
9 ight at ze
Watert
8
7
COP +(0.5+10% COP)
6
5
4
+0
+ 20%
3 QNL+ 0%
2
1
0
0 10 20 30 Q in m3/h
Technical data and performance are subject to change without prior notice depending on the technical advances. 13
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
MARKETS BENEFITS
RAW WATER DESIGN
DISTRIBUTION Compact to reduce the space around the distribution point
ROBUST
Resists careless handling
TECHNICAL DATA
PFA 20 and 25 bar
DN 65, 100 and 150
MAINTENANCE
Connection with an optimised number of bolts to save
time during maintenance
14 Technical data and performance are subject to change without prior notice depending on the technical advances.
ADAPTER SLEEVE
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
Different types of adapters can be used to enhance the capabilities of the equipment throughout its life.
140
Triangular flange 2 Triangular flanges
65 R45 65 R45
136
Round flange
35
DN 60/65
PN 16
182
139
Round flange
DN 100 PN 16
Round flange
35
DN 100 PN 16
Square flange
145 100-150 R45
299
Triangular flange
65 R45
32
Round flange
DN 100 PN 16
Square flange
100-150 R45
Square flange
100-150 R45 152
Square flange
100-150 R45
Round flange
DN 100 PN 16
Round flange
DN 150 PN 16
170
Technical data and performance are subject to change without prior notice depending on the technical advances. 15
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
MARKETS BENEFITS
RAW WATER DESIGN
DISTRIBUTION Integrated shut-off valve
WATER
DISTRIBUTION MAINTENANCE
NETWORK Built-in controller for easy functional testing
TECHNICAL DATA
DN 40 to 80 range
ISO PN flange pipe connec-
RELIABILITY
tion or G1" male threaded Guaranteed by years of experience in the field
PFA: 16, 25 and 40 bar
identifiable by colour
of controller handwheel
KEY FEATURES
Cast iron body and cap.
Elastomer-coated steel float ball.
Valve with square cap.
A2 stainless steel bolts and nuts.
16 Technical data and performance are subject to change without prior notice depending on the technical advances.
VANNAIR AIR VALVE
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
Automatic 3-function air valve
The intake or exhaust of high flow air from the network must
be managed throughout the life of the network. The reasons
for this can be diverse, but in most cases they will be used
during the filling or emptying phases.
MARKETS BENEFITS
RAW WATER PERFORMANCE
DISTRIBUTION High airflow performance with smooth speed changes
WATER
DISTRIBUTION MAINTENANCE
NETWORK Built-in controller for easy functional testing
TECHNICAL DATA
DN 40 to 200 range
DESIGN
ISO PN flange connection or Automatic shut-off on filling and choice of water (default setting) or air flow
G2" male thread
PFA: 10, 16, 25 and 40 bar
identifiable by colour of con-
troller handwheel
KEY FEATURES
Cast iron body and cap.
ABS flow channelling top cover
PVC disc
Elastomer-coated steel float ball.
Optional shut-off valve with square cap.
A2 stainless steel bolts and nuts.
Technical data and performance are subject to change without prior notice depending on the technical advances. 17
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
DJET VALVE
Pressure relief valve DJET
MARKETS BENEFITS
DISTRIBUTION PERFORMANCE
RAW WATER Instantaneous venting of excess pressure
WATER
DISTRIBUTION RELIABILITY
Constructed with materials that withstand extreme abrasion conditions
NETWORK
TECHNICAL DATA
DN 40 to 200 range
ISO PN flange connection
TAILOR-MADE SOLUTION
PFA: 10, 16 and 25 bar The setting pressure is preset at the factory
Factory-set to the
desired set pressure
KEY FEATURES
Cast iron body and cap.
Tungsten carbide seat
Wide setting range
Directional flow
18 Technical data and performance are subject to change without prior notice depending on the technical advances.
RAF-P
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
The plastic control valve RAF-P is part of the wide range of
products from RAPHAEL.
RAF-P valves are recommended for use in irrigation and turf
applications. Entirely manufactured from durable plastic
materials, with a state-of-the-art, patented diaphragm, the
RAF-P valve offers the best corrosion resistance available in
plastic technology with the streamlined, low friction hydraulic
performance of the RAF metal valve.
RAF-P valves operate with a patented reinforced diaphragm,
which eliminates the need for a metal spring.
The special elastic design enables gradual and precise
opening and closing of the valve, ideal for regulation
purposes.
MARKETS ADVANTAGES
UNIQUE NON MAINTENANCE LOW WEIGHT
IRRIGATION METAL WETTED FREE and cost effective
enables an easy
PARTS VALVE By having no spring
inside and a simple
dismantling from
No corrosion is the main pipe when
and reliable three part
possible irrigation is not in
valve: cover, patented
service and also
diaphragm and body
cheaper installation
TECHNICAL DATA
Fluid: raw water or filtered
water
Nominal Diameter (DN):
from 40 to 100mm (1.5’’ to 4”) CHARACTERISTICS
Available connections: refer over – The unique cover, solid
C ilots, solenoids – Fittings and
P
to the chart below rib construction is made of glass pipes are in polyethylene plastic
N ominal Pressure (PN): reinforced Nylon and nylon
10 bar
iaphragm – “No spring” patented
D ilot circuit is protected by a self-
P
M edium Temperature:
flushing finger filter, installed
diaphragm guarantees uniform
up to 70 °C
pressure distribution on sealing in the water inlet of the valve:
B ody material: glass
maintenance free
area, prevents diaphragm
reinforced Nylon
deformation and ensures longer
maintenance free operation imple settings by turning
S
clockwise or counter clockwise
ody – “Bridge” type, straight
B the pilot's adjusting screw
flow, glass reinforced nylon
ombination with other pilots or
C
asteners – Self-retaining chrome
F solenoids is possible to meet all
plated steel nuts and hex stainless demands
steel bolts enable easy access and
keep it corrosion free
Technical data and performance are subject to change without prior notice depending on the technical advances. 19
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
RAF IRRIGATION
RAF Valves are used for general water supply and irrigation.
The valves are made of only three parts; each one is made of
durable materials.
The inner flow passages are streamlined and coated with
low-friction materials.
This provides quiet flow in directions, low head loss and
minimal wear.
Valves operate with a patented reinforced diaphragm, which
eliminates the need for a retaining metal spring.
The special elastic design enables gradual and precise
opening or closing of the valve.
By eliminating the metal spring, the RAF is virtually
maintenance free.
OPTIONAL MATERIALS
Body:
- Ductile Iron
RAF METAL CONTROL VALVE for irrigation offers
- Bronze
the same application range as water supply
- Stainless Steel control valves.
over:
C Thus, applications are numerous: pressure,
- Ductile Iron level, flowrate or electrical control are
- Bronze available in PN 10 or PN 16, using tubing in
- Stainless Steel plastic / brass / stainless steel. Pilot material
iaphragm zinc:
D is defined according to the PN .
- EPDM
- Nitrile
Nuts: Stainless Steel
Washer: Stainless Steel
Bolts: Stainless Steel
oating: Epoxy Powder
C
Internal - Enamel
Coating: Rilsan
20 Technical data and performance are subject to change without prior notice depending on the technical advances.
ULTRAF SMART ULTRASONIC HYDROMETER
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
The ULTRAF combines the highest level of pressure and flow
control valve with an accurate and reliable Ultrasonic water
meter in one compact design. ULTRAF PRO combines state
of the art technologies from different fields such as advanced
hydraulics, accurate sensing and modern communications.
The ULTRAF is a unique product, based on the “RAF” control
valve merged with the newest technology of battery operated,
ultrasonic water meter. It enables flow monitoring and pres-
sure regulation in a small footprint saving significant space in
manholes and valve boxes.
The ULTRAF product flexibility allow it to be relevant to
different market and applications such: agriculture, turf &
municipal market, for pressure control and flow monitoring,
municipal market for leakage control and other.
Technical data and performance are subject to change without prior notice depending on the technical advances. 21
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
MARKETS BENEFITS
RAW WATER PERFORMANCE
DISTRIBUTION Very low tightness torque value
WATER
DISTRIBUTION RELIABILITY
Composite gate guide guarantees 2500 operating cycles
NETWORK
TECHNICAL DATA
DN 40 to 1000 range
Connection via ISO PN
DURABILITY
flange or PE end Excellent corrosion resistance due to integral coating
PFA: 10, 16 and 25 bar
Delivered with a square cap.
Available with electric
actuator option
Full bore KEY FEATURES
NF mark
Available in wastewater
Cast iron body and bonnet
version
Replaceable packing under pressure.
250 µm epoxy coating
22 Technical data and performance are subject to change without prior notice depending on the technical advances.
CENTRIC BUTTERFLY VALVE
MBR_IRH17052022_IRRIGATION BOOKLET_EN_D22001A
Centric butterfly valve
MARKETS BENEFITS
DISTRIBUTION FLEXIBLE
RAW WATER The valve can be installed between two pipe flanges (Wafer version) or at the end
of the pipe with or without a counter flange (LUG version).
WATER
DISTRIBUTION DURABILITY
NETWORK Corrosion protection ensured by valve body fully covered by rubber liner
TECHNICAL DATA and appropriate disc coating or material.
Technical data and performance are subject to change without prior notice depending on the technical advances. 23
TALIS is the undisputed Number One for water transport and water flow
control. TALIS has the best solutions available in the fields of water and
energy management as well as for industrial and communal applications. We
have numerous products for comprehensive solutions for the whole water
cycle – from hydrants, butterfly valves and knife gate valves through to needle
valves. Our experience, innovative technology, global expertise and individual
consultation processes form the basis for developing long-term solutions for
the efficient treatment of the vitally important resource “water”. TALIS Beteiligungs GmbH
PBR_IRH220301_IRRIGATION BOOKLET_EN_D22001A
Meeboldstrasse 22
D-89522 Heidenheim
PHONE +49 7321 320-0
FAX +49 7321 320-491
E-MAIL info@talis-group.com
INTERNET www.talis-group.com