Professional Documents
Culture Documents
Product Resources
What’s in the Box 18
Design Inspiration 19
Common Solutions 22
Placement Tips 24
Flex Linkers
Extend the possibilities of your Nanoleaf Shapes even further! Bend around corners, mount
the panels to angled surfaces, maybe even create something a little radical. Each linker
bends 360 degrees.
Design Inspiration
Get inspired by the Nanoleaf community! Check out our Social Media channels to see
what other Nanoleaf owners are creating or explore the Nanoleaf Library of Shapes here
(nanoleaf.me/inspiration).
Product Setup
6
Nanoleaf Shapes – User Manual
Mounting 1 Prepare Your Surface
Your Shapes The Nanoleaf Shapes should only be installed indoors and on a flat surface that can support the weight
of the panels. Clean your surface to be free of dust and moisture (1.1). The included Mounting Tape is NOT
recommended for textured, porous, popcorn and ceiling surfaces (ie. wallpaper or brick walls).
Product Setup
1.1 1.2
NOTE: Each standard 42W PSU supports up to 21 hexagons (2W per panel). Each Controller supports up to 500
hexagons. The Controller and PSU can be connected to any panel.
Product Setup
7
Nanoleaf Shapes – User Manual
4 Mount Your Panels Need to Dismount Your Shapes?
With a piece of tape, attach one adhesive side to the Mounting Plate. Make sure to place it between the Gently snap off the panel from the wall. The
two holes on the plate, DO NOT cover them (4.1). Repeat the same process so that there are 2 pieces of Mounting Plate will remain on the wall. With one
tape on each plate (4.2). To mount, position your panel on your surface and use your fist to apply strong hand on the Mounting Plate, use your other hand
pressure to the center while rubbing in a circular motion for 30s (4.3.) to pull the end of tape along the wall. Do not pull
perpendicularly or at any other angle, otherwise
you may damage your wall.
4.1 4.2 4.3
NOTE: Make sure to leave end of the tape sticking out. This will
allow you to safely remove them later from the wall.
Add to Your
5 Completing Your Setup Masterpiece
Attach all needed linkers before you mount
Be even more creative and grow
the next panel to the wall. Continue to snap
your setup with Expansion Packs.
each panel together and ensure that each
Purchase at shop.nanoleaf.me.
panel lights up. Make sure the linkers are fully
snapped onto the linker slot, the panels should
be aligned edge to edge. BUY NOW
Product Setup
8
Nanoleaf Shapes – User Manual
Pairing Standard Pairing Process for iOS
To ensure a smooth pairing process, please make sure you have the following things ready.
Your Shapes
iOS (1/2)
OR
You can find the official Nanoleaf Smarter Series App in the App Store. Make sure you have the latest version.
Product Setup
9
Nanoleaf Shapes – User Manual
Pairing Additional Pairing Methods (2/2)
iOS (2/2)
1. After Step 2.4 in the Standard Pairing Process above, hold the top of your device over the buttons
of your Controller to pair.
Product Setup
“How can one setup be controlled by
multiple iOS users?”
This is accomplished with the Apple Home App and the Nanoleaf App.
1 Primary User
2 Secondary User
Product Setup
10
Nanoleaf Shapes – User Manual
Pairing Standard Pairing Process for Android
To ensure a smooth pairing process, please make sure you have the appropriate things ready.
Your Shapes OR
You can find the official Nanoleaf Smarter Series App in the App Store. Make sure you have the latest version.
Product Setup
11
Nanoleaf Shapes – User Manual
Controlling Controller
The Controller is the brain of the Nanoleaf Shapes. The touch control buttons on the Controller
Your Shapes
provide convenient shortcuts to common commands. The Controller can be attached to any
available linker slot in your layout.
Product Setup
Next Rhythm Scene Shuffle
Cycle through Default or Saved The Controller comes with dozens
Rhythm Scenes. of preloaded Scenes. Hold the
Shuffle button to return to a
previous random Scene.
Next Color Scene
Cycle through Default or Saved
Color Scenes.
Only the last 5 randomly loaded This saves the current Scene if it’s
Scenes are available. A flash of not already saved. This is most
yellow on the panels will indicate useful for saving Scenes you like
that you are at the end of your when using Shuffle.
browsing history.
Product Setup
12
Nanoleaf Shapes – User Manual
Controlling Advanced Button Controls (2/2)
Your Shapes Activate White Lighting Mode Activate Wi-Fi Hotspot Mode
(2/5)
Tap Dim & Brighten buttons once Hold Power & Rhythm buttons for 30s
Cycle through the following preset This mode allows your Controller
white light modes: Warm White to act as a local network hotspot
Product Setup (2700K), Reading Light (4000K), without an Internet connection.
Daylight White (5000K). With this mode active, you can use
the Nanoleaf App to operate your
Nanoleaf Shapes without needing
Activate Power Diagnostic Mode a router or access point.
Hold Dim & Brighten buttons for 5s
Product Setup
13
Nanoleaf Shapes – User Manual
Controlling Touch Actions
Touch Actions transform each light panel into a smart button, allowing for the most seamless
Your Shapes
control of your entire smart home. With as little as a single press on a panel, activate HomeKit
Scenes to control any or all of your HomeKit products at once. See it in action here (youtu.be/
(3/5)
KWCBxYDoHwA).
Nanoleaf App
Turn your lighting on and off, control brightness, group lights by home and by room, create and
use Scenes, and much more.
Dashboard Discover
Choose an existing Scene or Find and download new Scenes
create your own (Static, Dynamic, created by the Nanoleaf
Rhythm, Group, Layered). You can community.
also use the Paint Tool to color
panels individually.
Schedules
Automate your Scenes to turn on
Explore or off.
Find helpful information including
tutorials, new device features, etc.
Product Setup
14
Nanoleaf Shapes – User Manual
Controlling Nanoleaf Desktop App
With the Nanoleaf Desktop App, you can control your Shapes from a web browser on your
Your Shapes
computer. Create and download new Scenes right from your computer, and try Screen Mirror
feature. The Desktop App was designed to simplify the management of larger installations
(4/5)
and offer control of many different layouts at once. Download it online here (nanoleaf.me/en/
nanoleaf-cloud/desktop-app).
Product Setup
Voice Control
You can easily control your Shapes by voice in a few different ways. In the Nanoleaf App, make
sure to name your panels with something easy.
“Set [Device Name] to 10% brightness.” “Turn on/off the lights in [Room Name].” “Turn off [Device Name].”
“Brighten/dim the lights.” “Turn on/off all my lights.” “Brighten/dim [Device Name].”
“Brighten/dim the lights to [%].” “Turn off [Device Name].” “Set [Device Name] to [%] brightness.”
“Set [Scene Name].” “Brighten/dim [Device Name].” “Set [Device Name] to [Color].”
“Set [Device Name] to [Scene Name]” “Brighten/dim the lights in [Room Name].”
“Set [Device Name] to [Color].” “Brighten/dim all my lights.”
Nanoleaf Remote
The Nanoleaf Remote is a sleek, dodecahedron-inspired Bluetooth HomeKit remote designed
to enhance the smarter home experience and make controlling the Nanoleaf Shapes and other
HomeKit products even more convenient.
Product Setup
15
Nanoleaf Shapes – User Manual
Controlling Nanoleaf Open API
A local network API designed to extend your product experience. Integrate your setup with third
Your Shapes
party devices and services and enable more granular control of the hardware. Find out more
about these controls here (forum.nanoleaf.me/users/sign_in).
(5/5)
Product Setup
Product Setup
16
Nanoleaf Shapes – User Manual
Product
Resources
What’s in the Box
Smarter Kit
(5 Pack) 5 5 6 6 1 1
Smarter Kit
(7 Pack) 7 7 8 8 1 1
Smarter Kit
(9 Pack) 9 9 10 10 1 1
Smarter Kit
(15 Pack) 15 15 16 16 1 1
Expansion Pack 3 3 4 3 – –
(3 Pack)
Product Resources
18
Nanoleaf Shapes – User Manual
Design
Inspiration
7x
9x
12x
Need More Ideas?
nanoleaf.me/inspiration
Product Resources
19
Nanoleaf Shapes – User Manual
Problems
& Solutions
Reset A Soft Reset
Options This will reset the Wi-Fi and all saved pairing configurations. Your saved Scenes will remain.
1. Press and hold the Power and Brighten buttons together on the Controller for 15 seconds.
Problems & Solutions 2. Let go once buttons start flashing.
3. Wait for the Power button LED to remain on and steady.
4. On the Nanoleaf App, delete the previous device and re-pair it again.
B Hard Reset
This will reset your Shapes to factory settings, deleting Wi-Fi settings, pairing information, and saved
Scenes. Default Scenes and settings will be restored.
If you are logged in to your Nanoleaf Account, scenes can be restored after a Hard Reset.
See Soft Reset on page 21. See Hard Reset on page 21.
Plug your PSU into power. The Power button on the Controller will light up after 1 minute.
Problems & Solutions a. Power Cycle your Shapes (unplug your PSU from power, then plug it back in).
b. If your panels are paired on the Nanoleaf App, delete the device and re-pair them with the
Standard Pairing Process.
Placement The following tips can help your Nanoleaf Shapes achieve the best wireless
range & network reception.
Tips a. Place your Shapes in an open area where there are less obstructions, such as large pieces of
furniture or walls.
b. Avoid placing your Shapes behind furniture or inside cabinets.
c. Don‘t place your Shapes in areas surrounded by metal surfaces on three or more sides. This can
cause signal issues.
d Try to place your Shapes at least 25 feet (8 meters) away from any microwave oven, 2.4 GHz
cordless phone, Wi-Fi devices, or other source of interference.
e. Place your Shapes as close to your Wi-Fi home router as possible. For best performance, keep the
distance below 65 feet (20 meters) and have no more than one wall in between.
Tips (1/2)
Problems & Solutions A Adjust Your Power Supplies for Optimal Performance
Tips (2/2) Power supply needs to be moved. Power supply is in good placement.