Professional Documents
Culture Documents
This Fluke product will be free from defects in material and workmanship for one year
from the date of purchase. This warranty does not cover fuses, disposable batteries,
or damage from accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other
9040 warranty on Fluke’s behalf. To obtain service during the warranty period, contact your
nearest Fluke authorized service center to obtain return authorization information,
Phase Rotation Indicator then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSE-
Users Manual QUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.
Since some states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of liability may not
apply to you.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands
PN 2438546 11/99
April 2005, Rev. 3, 11/21
© 2005-2021 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
Table of Contents
Title Page
Introduction .......................................................................................................... 1
How to Contact Fluke .......................................................................................... 1
Unpacking the 9040 ............................................................................................ 2
Safety Information ............................................................................................... 3
Symbols ............................................................................................................... 5
Elements of the 9040 .......................................................................................... 7
Determine the Rotary Field Direction .................................................................. 8
Maintaining the 9040 ........................................................................................... 9
Replacing the Fuse (9040UK only) ..................................................................... 10
Specifications ...................................................................................................... 11
i ii
9040
Users Manual
1 2
Phase Rotation Indicator 9040
Safety Information Users Manual
Safety Information • Comply with local and national safety codes. Use personal protective
Caution identifies conditions and actions that may damage the 9040. equipment (approved rubber gloves, face protection, and flame-
Warning identifies conditions and actions that pose hazard(s) to the user. resistant clothes) to prevent shock and arc blast injury where
XW Warning hazardous live conductors are exposed.
• Use the product only as specified, or the protection supplied by the
To prevent possible electrical shock, fire, or personal injury:
product can be compromised.
• Read all safety information before you use the Product.
• Do not work alone.
• Carefully read all instructions.
• Do not use test leads if they are damaged. Examine the test leads for
• Use this Product indoors only. damaged insulation or exposed metal. Check test lead continuity.
• Use only current probes, test leads, and adapters supplied with the • Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
Product.
• Keep fingers behind the finger guards on the probes.
• Do not use the Product above its rated frequency.
• Measurements can be adversely affected by impedances of additional
• Do not apply more than the rated voltage, between the terminals or operating circuits connected in parallel or by transient currents.
between each terminal and earth ground.
• Verify operation prior to measuring hazardous voltages (voltages above
• Do not keep the Product in operation and unattended at high 30 V ac rms, 42 V ac peak and 60 V dc).
temperatures.
• Do not use the 9040 with any of the parts removed.
• Do not use the product around explosive gas, vapor, or in damp or wet
environments.
3 4
5 6
Note
The 9040 is powered from the installation under test.
bbx02f.tif
Figure 1. The 9040 Phase Rotation Indicator
7 8
Phase Rotation Indicator 9040
Maintaining the 9040 Users Manual
9 10
11 12