Professional Documents
Culture Documents
STANDARD
y
nl
Prestressing steel - Part 4: Strand
(Second revision)
O
w
ie
ev
Pr
ICS: 77.140.99
Descriptors: prestressing steels, strand
© Copyright 2020
DEPARTMENT OF STANDARDS MALAYSIA
DEVELOPMENT OF MALAYSIAN STANDARDS
The Department of Standards Malaysia (Standards Malaysia) is the national standards
and accreditation body of Malaysia.
The main function of Standards Malaysia is to foster and promote standards, standardisation
and accreditation as a means of advancing the national economy, promoting industrial
efficiency and development, benefiting the health and safety of the public, protecting the
consumers, facilitating domestic and international trade and furthering international
y
cooperation in relation to standards and standardisation.
nl
Malaysian Standards (MS) are developed through consensus by committees which comprise
balanced representation of producers, users, consumers and others with relevant interests, as
may be appropriate to the subject at hand. To the greatest extent possible, Malaysian
O
Standards are aligned to or are adoption of international standards. Approval of a standard as
a Malaysian Standard is governed by the Standards of Malaysia Act 1996 [Act 549]. Malaysian
Standards are reviewed periodically. The use of Malaysian Standards is voluntary except in so
far as they are made mandatory by regulatory authorities by means of regulations, local by-
w
laws or any other similar ways.
ie
Jalan Usahawan
63000 Cyberjaya
Selangor Darul Ehsan
MALAYSIA
Contents
Page
y
1 Scope ................................................................................................................................ 1
nl
2 Normative reference ......................................................................................................... 1
3 Definitions ......................................................................................................................... 1
6 O
Strand construction ........................................................................................................... 2
Properties .......................................................................................................................... 3
w
7 Designation ....................................................................................................................... 5
Bibliography ............................................................................................................................... 6
ev
Pr
Committee representation
The National Standards Committee on Metallic Materials and Semi-Finished Products (NSC P)
under whose authority this Malaysian Standard was developed, comprises representatives
from the following organisations:
y
Construction Industry Development Board Malaysia
Department of Standards Malaysia (Secretariat)
Federation of Malaysian Manufacturers
nl
IKRAM QA Services Sdn Bhd
Jabatan Kerja Raya
Malaysia Steel Association
Malaysia Steel Institute
O
Malaysian Iron and Steel Industry Federation
Master Builders Association Malaysia
Ministry of International Trade and Industry
Pertubuhan Akitek Malaysia
SIRIM QAS International Sdn Bhd
The Institution of Engineers, Malaysia
w
Universiti Malaya (Fakulti Kejuruteraan Mekanikal)
Universiti Teknologi Mara
Universiti Sains Malaysia
Universiti Teknologi Malaysia
ie
The Technical Committee on Steel Bars, Wire Rods and Wire Products which developed this
Malaysian Standard consists of representatives from the following organisations:
ev
Co-opted member:
Foreword
This Malaysian Standard was developed by the Technical Committee on Steel Bars, Wire Rods
and Wire Products, under the authority of the Iron and Steel Industry Standards Committee.
This Malaysian Standard is the second revision of MS 1138-4, Specification for uncoated
y
seven-wire stress-relieved strand for prestressed concrete.
MS 1138 consists of the following parts, under the general title Prestressing steel:
nl
Part 1: General requirements
Part 4: Strand
O
Major modifications in this revision are as follows:
w
a) 2-wire and 3-wire has been removed;
b) 7-wire ordinary, grade 1860, size 15.7 mm has been added; and
ie
c) 0.1 % proof force has been made mandatory and the 0.2 % proof force is for information
only.
ev
Compliance with a Malaysian Standard does not of itself confer immunity from legal obligation.
Pr