Professional Documents
Culture Documents
Operation taboo:
Danger ※ Do not modify this equipment, including equipment components, software, cables
and so on. User modifications may result in security problems or reduced system performance. All
modifications must be completed by the personnel approved by KONTED.
Probe Components
1
6
2
3
8
5
9
10
-1-
3 Connect USG probe
Find SN of your USG probe Choose SSID “****BMH000” Enter password: uxccbmh000
Such as SN: UXCCBMH000
uxccbmh000
Note:
password is the SN of the
probe, but it is the small
letter not capital.
Connect the probe to your smart device by Type-C cable according to the picture below.
A B
Note:
The A-end must be fully inserted into the probe and the B-end must be fully inserted into the
smart device.
-2-
4 Scan now
Live
11 12 13 14 24 15 16 17
2 18
20
3 7 12
8
2
4 3
8
9
10
23 22 21 20 19
No Item Description
1 Serial number of probe 13 Preset selection
The Thermal Index (TI), Mechanical
2 Dynamic Range (DR) 14
Index (MI), and Hz values
DICOM Procedures, uploading images
3 Imaging Enhance (ENH) 15
to PACS
Mode: B⟺ B/M, Color⟺PDI
4 16 Body Mark
Dual click to switch scanning mode
5 Freeze/Live button 17 APP version number
6 Mode:PW 18 Show patient information
7 Focus Position 19 Full screen
8 H: change scanning frequency(F) 20 B Gain (GN)
Biopsy Needle Guide line 21 Live/freeze display
9 To invert the image horizontally or vertically.
U/D flip, R/L flip 22 Mid-line
10 Depth Scale display Dual screen display mode
23 (only available for Apple ipad and android pad
11 8 TGC: adjust gains of different depth device)
Depth: adjust depth by swiping the 24 New patient & new report
12
button (D)
-3-
23 Dual screen display mode
Click the left/right screens to switch freely, and you can switch B/BM/Color/PW mode at the
same time
B+Color mode
B+B mode
23
Color+PW mode
24
-4-
Color/PDI Mode
1 GN Color Gain ±
Click Steer Adjust the deflection
2 Steer
angle of color ROI
5 Click PRF Adjust color pulse
3 PRF
repetition frequency
1 Click WF Adjusting the filtering
frequency of a pulse wave or
2 4 WF
continuous wave Doppler low
6
3 frequency signal
4 Tap and drag the green box to
5
move the Color ROI
Use the arrows provided to adjust
6
the angle and size
7 Invert Color Red⟺Blue invert
7
8 Slide the Color/PDI menu bar
B
+ First select Color mode
Color Then switch to PW mode
8 + (only available for convex probe of
PW dual head serial USG probe)
PW Mode Mode
9 GN PW Gain ±
Click Steer Adjust the deflection
10 Steer angle of sampling line of linear
array probe
Change the size of the sampling
11 Volume
volume
Used to change the spectrum
12 Angle
9 sampling line angle
14
Adjust color pulse repetition
10 13 PRF
frequency
11
14 Tap and drag the green line
12 Move the velocity scale
15Baseline
13
16 Slide the PW menu bar
Automatic blood flow measurement
Step1: select vessel flow preset
15 Step2:enter PW mode, produce a
17 uniform spectrum
Flow-mode Step3: click Flow mode ON
ON/OFF Step4: Freeze the PW image then
will show the result automatically
17 (only available for linear probe of
16
dual head serial USG probe)
-5-
Freeze
3 Measurements
2
Save video, review the video in Date
4
Table 3
4
5 Date Table
6
7 Manual cine review 7
Image Browser
8 Review image/video/report
9
Sharing scanned files by other
app
Share
Printing image/report
-6-
5 Settings
-7-
6 Charging
Power outlet
-8-
Copyright Ownership and Usage Limitation
· All copyrights and intellectual property rights of the contents created are owned by
KONTED.
· No individual or organization may copy, modify or translate any part of this manual without
the written consent of KONTED.
BEIJING KONTED MEDICAL TECHNOLOGY CO.,LTD