Professional Documents
Culture Documents
Commercial Laundry Product Catalogue (20200811 - 182413)
Commercial Laundry Product Catalogue (20200811 - 182413)
LAUNDRY SYSTEMS
LG CO M MER CIAL L AUNDR Y SYSTEMS 3
Why LG
Commercial Laundry?
Y X
Y X
Our powder coated finish creates Unlike the traditional belt & pulley LG Gyro Balancing System provides
Premium Powder Inverter Direct Gyro Balancing the same durability as it does when system, the LG commercial laundry optimized performance through
Coating Drive™ System painting a car. It is sure to last long drum is directly attached to the advanced algorithm.
and provide an easy to clean exterior. motor , providing superior durability.
Space Saving Atomizing & 10° Tilted Drum The small cabinet size with bigger The Atomizing nozzle sprays fresh LG's commercial washer tub is tilted
washing capacity and stackable water onto the clothes and the door, 10º. It enables the washer to have
Twin spray design allows more customers and providing rapid water supply. Twin Spray higher water level compared to
more machines in limited space. circulates soapy water, increasing wash competitors.
performance and water visibility.
Convenient Install & Maintenance Tub Clean & Waveforce Installation Flexibility Auto Dosing System
Installation
Flexibility
Why LG
Commercial Laundry? Sturdy & Long Lifecycle
Why LG
Efficiency &
Commercial Laundry? Energy Friendly
1 Space Saving
10kg 10kg 10kg 10kg = TOTAL
The small cabinet size with bigger
washing capacity and stackable design 40kg
allows more customers and more vs
machines in limited space.
TOTAL
9kg 9kg 9kg 9kg =
36kg
1 Space Saving
2
2 Atomizing & Twin Spray Non-stop Rinse 1) Atomizing &
The Atomizing nozzle sprays fresh water Twin Spray
onto the clothes and the door. This helps
produces a rapid fill so clothes are soaked
sooner and longer providing a better
+
washing performance. It also cleans the
door glass every time the water sprays on it, 3 10° Tilted Drum
reducing your burden of cleaning any excess
soap residue. Twin Spray circulates soapy
water, increasing wash performance and
water visibility.
1) Simultaneous atomizing spray, rinse spin, and drain for quick rinsing
Streamline maintenance
View status and error codes anytime and anywhere. LG Customer Care
Cloud API
Maximize profit
4 LG Smart Solution Set and tweak prices based on patterns and targeted timing.
LG Monitoring System
TECHNICAL
SPECIFICATIONS GIANT-C
Non-Heater Heater Gas Electric
Giant-C Washer FH069FD*L/GCWL1069*** F*069FD*PS / WD-H069BD*S Giant-C Dryer RN1329***** / GDP1329*G**
RV1329**** / GDP1329*E** /
TD-V1329EA*
CYLINDER CYLINDER
Drum Volume cu.ft (ℓ) 7.3 (207) 7.3 (207)
Drum Volume cu.ft (ℓ) 3.7 (104.8) 3.7 (105.6)
Diameter in. (mm) 26.1 (663) 26.1 (663)
Diameter in. (mm) 22.1 (560) 22.1 (560) Depth in. (mm) 22.5 (570.6) 22.5 (570.6)
Depth in. (mm) 16.5 (419.3) 16.5 (419.3) DIMENSIONS
DIMENSIONS in 27 x 38.7 x 30.1 27 x 38.7 x 30.1
in 27 x 38.7 x 30.2 27 x 38.7 x 30.2 Product (WxHxD)
Product (WxHxD) mm 686 x 983 x 764 686 x 983 x 764
mm 700 x 983 x 770 700 x 983 x 770
With Door Open in. (mm) 52.6 (139.6) 52.6 (1,337) With Door Open in. (mm) 49.8 (1,264) 49.8 (1,264)
in 29.5 x 41.9 x 31.4 29.5 x 41.9 x 31.4 in 29.9 x 46.1.4 x 31.3 29.9 x 46.1.4 x 31.3
Carton (WxHxD) Carton (WxHxD)
mm 750 x 1,065x 797 750 x 1,065x 797 mm 760 x 1,170x 795 760 x 1,170x 795
Weight (Product/Carton) lb (kg) 191.8 (87) / 209 (94.8) 191.8 (87) / 209 (94.8) Weight (Product/Carton) lb (kg) 130 (59)/143 (65) 130 (59)/143 (65)
SPEED RATING
Wash RPM 40~50 40~50 120/60/5 120 (240)/60/26
Extract (Max RPM) RPM 1200 1150 220~240/50/2.4 220~240/50/22.5
Electric Ratings V/Hz/A
G-force G 449 413 220/60/3 220/60/21
RATING - 240/50/19.51)
120/60/7 -
SYSTEM & CONTROL
Electric Ratings V/Hz/A 220~240/50/7 220~240/50/15~17.5
Heating Type Gas (LNG/LPG)2) Electric
220/60/7 -
*CONSUMPTION INDEX 1) Type of Drying Ventilation Ventilation
Water gal (l) 13.8 (52.2) 12(45.5) Air Flow CFM 160 160
Electricity kW/cycle 0.076 - 0.4 (120V/60Hz) 0.4 (120V/60Hz)
NOISE & CYCLE TIME Motor kW 0.3 (220~240V/50Hz) 0.3 (220~240V/50Hz)
Noise Level (Sound Power) dB Lower than 57 - 0.4 (220V/60Hz) 0.4 (220V/60Hz)
Program Duration in Minutes Gas Ratings BTU/hour 5.8/20,000 -
min 36 59 (60°C Course)2)
(Default)
Heating Element 20,000 120V/220V 5,400
SYSTEM & CONTROL W
230~240V 4,500 (Australia)
Inverter Direct Drive Motor O O
120V 1,000 (Only for Tub Clean) Program Duration in Minutes
Heating Element W 3,200 min 45 (NA) / 50 (EU) / 45 (Australia) 45 (NA) / 50 (EU) / 45 (Australia)
220V 2,000 (Only for Tub Clean) (Default)
Drain System Pump drain CONNECTIONS
Auto Dosing Interface O O Air Outlet Diameter in. (mm) 4 (100) 4 (100)
Gyro Sensor O - Exhaust Airflow Diameter in. (mm) 4 (100) 4 (100)
Damper 4 Friction Dampers 3 Friction Dampers
PROGRAMS
PROGRAMS
High Temp High Temp
Hot 90°C (194˚F)
Warm 75°C (167˚F) Med Temp Med Temp
Program List
Cold 60°C (140˚F) Low Temp Low Temp
Program List
Delicates 40°C (104˚F) No Heat No Heat
Add Super Wash (Card & Coin) Cold 3) EXTERNAL FINISH
/ 20 Custom PGM (OPL) * Custom PGM
Drum Alcosta Alcosta
EXTERNAL FINISH
Drum Stainless Steel Stainless Steel * Dimensions and weights are approximate. * Design, features and specifications subject to change without notice.
* Some models may not be available for sale in certain countries. * Model name may vary by country.
CIRCUIT PROTECTION 1) 4,500W for some countries due to power limitation (e.g. Australia), 2) Gas type depends on country sales model.
PCB Fuse - Main Control Board amps 12 (220~240V) 12 (220~240V)
PCB Fuse- Filter Assembly amps 15 15
Main PCB MICOM T370 T370
* Dimensions and weights are approximate. * Design, features and specifications subject to change without notice.
* Some models may not be available for sale in certain countries. * Model name may vary by country. Maximum Maximum
1) Based on DOE J2/J1 testing. Number of length of
Weather length of
2) Washer detects water temperature and adjusts heating time automatically if hot water supply is available Hood Type90° 4” (10.2cm) 4” (10.2cm)
Elbows diameter diameter
3) When you press button for 3 seconds, Cold cycle will be changed to Custom PGM. (Cold for coin model, Custom PGM for OPL model) rigid metal duct flexible metal duct
Recommended
Recommended 0 0
65 feet (19.8m) 45 feet65(13.7m)
feet (19.8 m) 45 feet (13.7 m)
Front Side 1 55 feet (16.8 m) 35 feet (10.7Front
m) Side Stacked Installation
1 55 feet (16.8m)
2 35 feet47(10.7m)
feet (14.3 m) 30 feet (9.1 m)
52.6" 4” 4” 3 36 feet (11.0 m) 25 feet (7.6 m) 14” max
(1,337mm) (10.2cm)
Recommended 2
(10.2cm) 0 47 feet (14.3m) 30 feet
65 4feet (19.8 m)28(9.1m) 45m)
feet (8.5 feet (13.7 m)20 feet (6.1 m) (356mm)
1 55 0feet (16.8 m) 55 feet (16.835 feet (10.7 m)
m) (13.7 m) 35 feet (10.7 m) 18”
RecommendedUse Only for Short Run 0
3 2 36 feet65 feet (19.8
(11.0m) 25 m)
feet 45 feet
Installations 47 1feet (14.3 m) (7.6m) 30m) feet (9.1 m) (457.2mm)
1 55 feet (16.8 m)47 feet (14.335 feet (10.7 m) 27 feet (8.2 m)
38.7” 4” 4” 3 36 feet (11.0 m) 25 feet (7.6 m)21 feet (6.4 m)
(10.2cm) (10.2cm) 4 24 28 feet 47 2 (14.3
(8.5m)
feet 20 m)41(6.1m)
feet feet (12.5 m)
30 feet (9.1 m)
(983mm) 3
28 feet (8.5 m)
3 (11.0 m) 30 feet (9.1
36 feet
20 feet (6.1 m) 76.9”
4” 4” 2-1/2” 25 m)
feet (7.6 m) 17 feet (5.2 m)
Use
Use Only for Short
(10.2cm) Only
Runfor (6.35cm)0 40
(10.2cm) 55 feet (16.8m)
55 feet 35
(16.8 feet
m) (10.7m)
4 (8.5 m) 22 feet (6.7
28 feet 35 feet (10.7 m) (1,954mm)
20 m)
feet (6.1 m) 15 feet (4.5 m)
Installations Short Run
Installations
Use Only for Short Run 1 01 47 feet5547feet
feet(16.8
(14.3m) (14.3
27m) m) (8.2m) 3527
feet feet
feet (8.2m)
(10.7 m)
Installations 2 41feet
feet(14.3
(12.5m)m) 21 feet (6.4 m)
2 1 41 feet47
(12.5m) 21 feet (6.4m) 27 feet (8.2 m)
2-1/2” 23 4130 feet
feet (9.1m)
(12.5 m) 2117feet
feet (5.2
(6.4 m)m)
1” 27” 1” 22.4" 30.2” 4” (6.35cm) 3 4 30 feet (9.1m) 17 feet
m) (5.2m) 1715 feet (4.5 0” 27” 0” 21” 30.1” 1”
(25mm) (686mm) (25mm) 2-1/2” 3 22feet
30 feet(9.1
(6.7
m) feet (5.2 m)m)
(0mm) (686mm) (0mm) (540mm) (764mm)(25mm)
(570mm) (767mm) (100mm)
(6.35cm) 4 4 22 feet (6.7m)
22 feet (6.7 15m)feet (4.5m) 15 feet (4.5 m)
LG CO M M ER CIAL L AUNDR Y SYSTEMS 13
TECHNICAL
SPECIFICATIONS TITAN-C
Non-Heater Heater Gas
TITAN-C Washer FH0C7FD*L/TCWL2013*** FH0C7FD3S TITAN-C Dryer RN1870A** / TCD1870***
CYLINDER CYLINDER
Drum Volume cu.ft (ℓ) 5.2 (147) 5.2 (147) Drum Volume cu.ft (ℓ) 9.0 (254)
Diameter in. (mm) 24 (610.8) 24 (610.8) Diameter in. (mm) 28.2 (716)
Depth in. (mm) 20.4 (518.1) 20.4 (518.1) Depth in. (mm) 24.2 (614)
DIMENSIONS
DIMENSIONS
in 29 x 40.8 x 32 29 x 40.8 x 32
Product (WxHxD) in 29 x 40.2 x 42.9
mm 737 x 1,036 x 814 737 x 1,036 x 814 Product (WxHxD)
With Door Open in. (mm) 53 (1,370) 53 (1,370) mm 737 x 1,022 x 1,090
in 31 x 44.3 x 33.3 31 x 44.3 x 33.3 With Door Open in. (mm) 65.1 (1,655)
Carton (WxHxD)
mm 788 x 1,125x 846 788 x 1,125x 846 Single : 30.7 x 44.7 x 44.4
in
Weight (Product/Carton) lb (kg) 221.8 (100.6) / 248 (112.5) 221.8 (100.6) / 248 (112.5) Stack : 30.7 x 83.1 x 44.4
SPEED Carton (WxHxD)
Single : 781 x 1,137 x 1,128
Wash RPM 46 46 mm
Stack : 781 x 2,110 x 1,128
Extract (Max RPM) RPM 1000 980 Weight (Product/Carton) lb (kg) 220 (100)/240 (108.8)
G-force G 340 327
RATING
RATING
Electric Ratings V/Hz/A 120/60/10
120/60/5
Electric Ratings V/Hz/A 220~240/50/5 220~240/50/14~17 SYSTEM & CONTROL
220/60/5 Heating Type Gas (Default LNG)
*CONSUMPTION INDEX1) Type of Drying W Ventilation
Water gal (l) 16.5 (62.5) 12.4(47) Air Flow CFM 350
Electricity kWh/cycle 0.077 3.2~3.8 Drum Motor kW 0.5 (120V/60Hz)
NOISE & CYCLE TIME Fan Motor kW 0.3
Noise Level (Sound Power) dB Lower than 62 Lower than 62 Gas Ratings BTU/hour 55,000
Program Duration in Minutes (Default) min 36 59 CONNECTIONS
SYSTEM & CONTROL Air Outlet Diameter in. (mm) 6 (154)
Inverter Direct Drive Motor O O Exhaust Airflow Diameter in. (mm) 6 (154)
120V 1,000 (Only for Tub Clean) PROGRAMS
Heating Element W 3,200
220V 2,000 (Only for Tub Clean) High Temp
Drain System BLDC Gravity Drain
Med Temp
Emergency Stop Button O (OPL Only) O (OPL Only) Program List
Inlet Valve DC AC Low Temp
Auto Dosing Interface O O No Heat
Gyro Sensor O X EXTERNAL FINISH
Damper 4 Friction Dampers 4 Friction Dampers Drum Stainless Steel
PROGRAMS
Hot* 90°C * Dimensions and weights are approximate. * Design, features and specifications subject to change without notice.
* Some models may not be available for sale in certain countries. * Model name may vary by country.
Warm* 75°C
Cold* 60°C
Program List
Delicates* 40°C/30°C
Add Super Wash (Card & Coin)/ Cold 2)
20 Custom PGM (OPL) * Custom PGM
EXTERNAL FINISH
Drum Stainless Steel Stainless Steel
CIRCUIT PROTECTION
PCB Fuse - Main Control Board amps 12 (220~240V) 12 (220~240V)
PCB Fuse- Filter Assembly amps 15 15
Main PCB MICOM T470 T370
*Dimensions and weights are approximate. *Design, features, and specifications subject to change without notice.
*Some models may not be available for sale in certain countries. *Model name may vary by country
*Energy Course available
1) Based on DOE J2/J1 testing Front Side Stacked Installation
2) When you press button for 3 seconds, Cold cycle will be changed to Custom PGM. (Cold for coin model, Custom PGM for OPL model)
14” max
Front Side Back (356mm)
53" 18”
(1,370mm) (457.2mm)
80.3”
40.7” (2,040 mm)
(1,036mm)
TECHNICAL
SPECIFICATIONS ATOM
Front Side
39”
(990mm)
33.5”
(850mm)
REFERENCE
SITES
Laundromat / Jakarta, Indonesia Multi-housing / Toronto, Canada Laundromat / Seoul, Korea Laundromat / Zagreb, Croatia
Laundromat / Singapore, Singapore Laundromat / Kota Kinabalu, Malaysia Laundromat / Manila, Philippines Laundromat / Mexico City, Mexico
Laundromat / Hanoi, Vietnam Laundromat / Shanghai, China Laundromat / Santiago, Chile Multi-housing / Seattle, US
LG CO M M ER CIAL L AUNDR Y SYSTEMS 19
LAUNDRY FAQ
LOUNGE
Laundry Lounge
Q1 Which coin drop brands are
compatible and is the coin drop
A1 Coin drop is not included; you can buy and
use Greenwald, ESD and Munzuprufer with
our product.
included in the box?
Q4 How do I stack the machines? A4 Using the stacking kit (provided with Upper
dryer), attach the 2 stacking brackets on the
top plate of the bottom machine. Remove the
legs and their brackets on the Upper dryer,
SMALL SIZED SHOP LARGE SIZED SHOP then attach the 4 sliding pads. Place the
(35m2, with 16 Machines) (100m2, with 34 Machines) dryer by fitting the pads into the slots of the
stacking brackets. Secure the Upper dryer by
attaching the back bracket.
Q5 Ismachines
it possible to convert
from payment to non-
A5 You can select Payment type (Coin or Card) and
Non-Payment type (On Premise Laundry) in
Setup mode.
payment or vice versa?