Professional Documents
Culture Documents
LED is permanently on: Fire departement has to be notified by phone Press key
to display the information
LED is permanently on: Fire departement has to be notified automatically entered for this situation
Buzzer off
Buzzer off Acknowledgement of the control panel buzzer. This key remains active
when the keyboard is locked. The buzzer is reactivated in the case of a
Press further event.
key
Verify
Verify If the >Delay function< is activated, pressing this button during an event
starts the investigation time for delayed activation of the master box. The
Press
key
first and last messages with the highest priority appear in the display again
without the need to press any other buttons.
The following operations are only possible when the key switch is not locked (Access level 2)!
798361.10
GB Technical changes reserved!
09.2009
© 2009 Honeywell International Inc.
Switching on / resetting a zone (example: zone no. 4)
With switch-on/reset, a zone, which has been switched off -incl. all fire alarms-, is switched into the operative
status or an operative zone is reset and any imminent messages such as >Fire or Trouble< are deleted.
Zone On
4 Press
Key
Operation
Zone: 4 On
Detector: 0 in progress
Zone Off
4 Press
Key
Operation
Zone: 4 Off
Detector: 0 in progress
In addition to the message on the display, the Disconnect is indicated optically by the common display
>Disconnect< on the control panel and the corresponding continuous lighting of the yellow LED on the single
zone indicator unit (if present).
Panel
Panel reset
reset All detected fire alarms, zones, displays and technical alarm signals (TAL
Press alarm) are cancelled and returned to normal condition.
key Access level 2 (keyboard release with key) required.