Professional Documents
Culture Documents
API 510 CLOSE BOOK (Sec VIII+ API-510 Closed) - 18
API 510 CLOSE BOOK (Sec VIII+ API-510 Closed) - 18
10. A Shell with nom. I.D. = 2200 mm is rolled and the inspector
observed following readings, D max = 2215mm, D min = 2195
mm. Should the shell be:
a. Accept
b. Reject
c. Accept after NDT
d. Depends on opinion of inspector.
12. Which of the following are areas on pressure vessel which are
susceptible to CUI?
14. What can be done to extend the life of a 2” thk. vessel with a
corroded area in the shell plate 6 inches from the weld, a joint
efficiency of less than 1, and a corrosion thickness currently near
the minimum required thickness?
a. 150 inches
b. 140 inches
c. 160 inches
d. None of above
a. Jurisdiction organization
b. Insurance company which under writes insurance of
pressure vessels
c. Inspection organization of owner-user
d. Any of above
a. Stress-corrosion cracking
b. Erosion
c. Hydrogen embrittlement
d. Tamper emrittlement
18. For all repairs and alterations under API 510, the ultimate
responsibility rests with
a. Owner user
b. API Committee
c. API-510 Inspector
d. Jurisdiction authority
20. A pressure vessel has design pressure = 300 psi. Its safe stress
values at ambient and designed temperatures are 17100 psi and
16300 psi respectively. The hydrostatic test pressure and
inspection pressure for above will be: