Professional Documents
Culture Documents
The SN6-150CX features a 1.75 inch (44.5mm) diameter voice coil that 13.1 mm.
provides an AES rated 150 watts of continuous power handling and a full
600 watts of peak rated power handling when sufficient amplifier headroom
is available. The SN6-150CX employs P Audio’s under damper venting to
control turbulent air flow. 122.5 mm.
The voice coil design is a bobbin wound geometry with P Audio’s precision
round wire technology to maximize system conversion efficiency.
120.0 mm.
145.0 mm.
162.0 mm.
The high frequency section is a close spaced titanium diaphragm assembly. SIDE VIEW
The diaphragm is a 1.34 inch (34mm) diaphragm that provides excellent Frequency Response and Impedance Curves
high frequency response and superior power handling and durability. The 200
Ohm dBSPL
110
horn loading is a thru pole piece design The overall high frequency design 180 100
140 80
120 70
The transducer chassis is a die cast aluminum design that insures a very 100 60
60 40
40 30
20 20
0 10
20 Hz 50 100 200 500 1K 2K 5K 10K 20K
FREQUENCY (Hz), Measured-1W @ 1m