Professional Documents
Culture Documents
-Turn the [VRM] dial to make adjustments so that the farthest point of the performance monitor
pattern.
-Confirm that the Tx/Rx system attenuation value does not exceed
the limit listed below.
Transmitter system attenuation value check. → Receiver system attenuation value check. →
Tx system: -7dB
Rx system: -3dB
If Rx performance down > 3dB or Tx performance down > 7dB with the performance monitor test, radar should be
checked by service engineer. This means that the TX/RX unit may be faulty. Consult with the near-by dealer or our sales
department.