Professional Documents
Culture Documents
SMAJ5.0
THRU
TM
0D[LPXP5DWLQJ
• Operating Temperature: -55°C to +150°C C
• Storage Temperature: -55°C to +150°C
• Typical Thermal Resistance: 25 /W Junction to Ambient F H
D
Peak Pulse Current on G
IPPM See Table 1 Note 1
10/1000
E
DIMENSIONS
Peak Pulse Power Dissipation PPPM Min 400 W Note 1, 5 INCHES MM
DIM MIN MAX MIN MAX NOTE
A .157 .181 4.00 4.60
Steady State Power Dissipation PM(AV) 1.0 W Note 2, 4 B .098 .114 2.50 2.90
C .006 .012 0.152 0.305
D .030 .060 0.76 1..52
E .188 .208 4.80 5.28
Peak Forward Surge Current IFSM 40A Note:4 F .078 .096 2.00 2.44
G .055 .062 1.40 1.60
H .002 .008 0.051 0.203
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above SUGGESTED SOLDER
TA=25 per Fig.2. PAD LAYOUT
2. Mounted on 5.0mm2 copper pads to each terminal. 0.085 ”
MA X
3. 8.3ms, single half sine wave duty cycle = 4 pulses per
Minutes maximum.
4. Lead temperature at TL = 75 . 0.058 ” MI N
5. Peak pulse power waveform is 10/1000 .
0.05
MI N
www.mccsemi.com
1 of 4
Revision: 9 2006/09/21
MCC TM
100
75
NON-REPETITIVE
PERCENTAGE %
PULSE WAVEFORM
SHOWN IN FIGURE 3
TA = 25 °C
10
50
1.0
25
MOUNTED ON 5.0mm 2
COPPER LAND AREAS
0.1
0.1us 1.0 us 10 us 100 us 1.0ms 10ms 0
0 25 50 75 100 125 150 175 200
td, PULSE WIDTH, SEC
TA, AMBIENT TEMPERATURE, °C
Fig. 1-PEAK PULSE POWER RATING CURVE Fig. 2-PULSE RATING CURVE
10,000
TJ = 25 °C
40,000 f = 1.0MHz
150 Vsig = 50mVp-p
TA = 25 °C
20,000
tf = 10 sec Pulse Width(td) is Defined as the
Ippm, PEAK PULSE CURRENT, %
CJ, CAPACITANCE, pF
MEASURED AT
Point Where the Peak Current 1,000 ZERO BIAS
Peak Value Ippm Decays to 50% of lpp
6,000
100
4,000
Half Value- Ipp
2,000
2
100
50 10/1000 sec Waveform
MEASURED AT
as Defined by R.E.A. 500 STAND-OFF
VOLTAGE(VMW)
200
td e-kt
0 10
0 1.0 2.0 3.0 4.0 1.0 2.0 5.0 10 20 50 100 200
50
Ifsm, PEAK FORWARD SURGE
TJ = TJ max
8.3mss SINGLE HALF
40
CURRENT, AMPERES
SINCE-WAVE JEDEC
METHOD
30
20
10
0
1 4 10 20 40 100
www.mccsemi.com
Revision: 9 2 of 4 2006/09/21
SMAJ5.0 thru SMAJ440CA
MCC TM
www.mccsemi.com
Revision: 9 3 of 4 2006/09/21
MCC TM
***IMPORTANT NOTICE***
Micro Commercial Components Corp . reserves the right to make changes without further notice to any
product herein to make corrections, modifications , enhancements , improvements , or other changes .
Micro Commercial Components Corp . does not assume any liability arising out of the application or
use of any product described herein; neither does it convey any license under its patent rights ,nor
the rights of others . The user of products in such applications shall assume all risks of such use
and will agree to hold Micro Commercial Components Corp . and all the companies whose
products are represented on our website, harmless against all damages.
***APPLICATIONS DISCLAIMER***
Products offer by Micro Commercial Components Corp . are not intended for use in Medical,
www.mccsemi.com
4 of 4
Revision: 9 2006/09/21