Professional Documents
Culture Documents
POR40827 v1 Swedex-katalog-GB Optimerad1
POR40827 v1 Swedex-katalog-GB Optimerad1
com
Highline by Swedex
1.
log sawing 41
sawmill
Edging blades 42-43
Trim and cross-cut saw blades 44-45
segments 63
randek 77
maintenance 81
4.
6.
8.
10.
Competence, continuity
and quality.
”To me, development is a desire to be a team
and dare to have ambitions”
/ Magnus Karlsson, sales/ technical support
11.
info@swedex.co.uk
Swedex (UK) Ltd
Brunel Park
Harworth
Doncaster
DN11 8NE
12.
14.
Tooth pitch
Special
Diameter
Kerf/ saw-body
Center bore
No. of teeth
Hook angle
16.
Negative
Negative 5-10° 5-10º
Crosscutting of wood in pendulum and parallel saws, 2-5º
edge band cutting and trimmer machines using down
cut feed.
Negative 2-5°
Cutting of metals with manual feed, plastics and lami- 6-10º
nates.
6-10°
Crosscutting of wood, hard plastics and veneered and
laminated boards. Metal sawing with automatic feed.
5-15° 5-15º
Crosscutting of wood. Panel sizing of chipboards, plas-
tics, plywood and veneered boards.
22°
Ripping of dry or green wood.
22º
25-30°
Ripping and edging of green wood.
25-30º
rake angle
17.
BAE
18.
Alternately
The front of the tooth is straight as standard. To get maxi-
mum sharpness and the best cutting performance the teeth Standard
can also be alternately bevelled or hollow ground.
Exemple:
keyways & screw/pin holes A blade has 4 screw holes, with inner diameter
Di=6, outer diameter Dy=10 mm and DC=80
Pin holes (PH) are specified by the pitch circle mm. The countersink is on the right hand side.
(DC) or “edge to edge” (kk), as shown in the
picture.
4FH 6,0 Dy=10,0 DC=80 b kk
D
Screw holes (FH) are specified by the pitch circle countersink right
(DC), see the picture above. For screw holes sta-
te Di and the countersunk angle or Dy or screw countersink
DC
keyways. 2ks11x6 y
d
If the saw blade only has one pin hole specify x
PH Combi/keyhole
2/7/42 + 2/9/46,5 +2/10/60
9
These holes you find on marked items in the DC 60
catalogue. 19.
T4 = Extra small kerf (with limited cutting L = Laser dampened saw body (The saw blades have
depth) laser tracks filled with damp mass. Noise and vibra-
tions are therefore reduced by up to 40%).
S = Blade with guard teeth
BO = Bombastic side grinding
The Carbide grade is chosen for the application. One example is chipboard
or MDF which are very abrasive materials and require a hard grade of car-
bide. A hard carbide usually has a high percentage of small grains and a small
proportion of adhesive, while a softer carbide comprises of larger grains and
a high proportion of adhesive. A common application for a soft variant of
carbide is the cutting of steel.
The carbide hardness is measured in Vickers. The table below states some
common carbide grades:
H45 1.170 HV
H20 1.440 HV
H10 1.760 HV
Longlife 2.150 HV
SMA 1.400 HV
silver braze
The carbide tooth is brazed on the steel core with silver braze. It is very
important that the surfaces are clean to give a strong bond.
We use several different silver braze grades. The most common is a three
layer type with copper inlay. This reduces the risk of cracks in the carbide
during the brazing.
steel
The steel used in our saw blades is of the highest quality. It is hardened to
give a combination of high strength and stability to the saw blade. The steel is
laser cut and tempered to the correct hardness depending on the saw bla-
de’s area of use. It is very important to perform the heat treatment correctly
in order to get the hardness, toughness and evenness to harmonize with
each other. With an all too hard raw saw blade, cracks can develop by high
stress, but on the other hand an all too soft raw saw blade tends to bend by
side pressure.
21.
Number of teeth
The tooth pitch is determined by the thickness of material to be cut. Gene-
rally , the thinner the material the smaller the tooth pitch, and the larger the Min 2
material the larger tooth pitch. At least two and no more than four teeth Max 4
must be engaged at all times when cutting in solid wood. For other materials
two to six should be engaged.
It is important that the saw blade is optimized for the material to be cut. It is
gs
Pitch
ttin
Stated in picture:
22.
feed speed
The feed speed (S) is determined by the speed of revolution (n), the num-
ber of teeth (z) and the feed per tooth (Sz).
During servicing, shims should always be placed between the blades. Teeth are very
sensitive to knocks and impacts.
Clean the blade regularly to remove the coating of chips and resin that sticks to cutting
edges, gullets and saw body. The coating increases the friction as well as the tempera-
ture and causes the blade to run hot and twist. The increased wear may in the worst
case cause the blade to crack. We recommend the usage of Swedex cleaning agent, an
efficient and environmental friendly solution.
measuring equipment
It is important to have good quality measuring equipment to control the saw
blade’s dimensions. Swedex provides complete sets containing all the equip-
ment needed for measuring a saw blade. Contact us for more information.
The sketches show that the rake angle varies with the cutting set-up. If the
working height is increased significantly the rake angle must be modified.
Large
Standard rake angle
Small rake angle
rake angle
24.
25.
Check that the blade is flat and correctly 150-250 0,06 Flange diameter
tensioned. Levelling is easier if you have 251-300 0,07
a well organised work area and accurate
301-400 0,10
measuring tools.
401-500 0,12
501-600 0,15
If the saw blade has been in use, it must
601-700 0,18
first be straightened.
701-800 0,20
Inspect the saw blade with a steel rule or
an indication clock. Use the same size of
flanges as in the saw machine. If using an
indication clock position it directly under
the gullet. Place the blade on an anvil and
check that it is flat on both sides using a
long ruler. If the blade has high spots or
is uneven it should be levelled using a
cross-faced hammer. The table shows the
tolerance of a new saw blade.
BACK GRINDING
If the saw blade has replaced tips it needs For best results we recommend the fol-
to be ground on the sides. Grind to the lowing grinding times: Front grinding 8-10
same radial and tangential clearance angles seconds, depending on length of tip Top
as the original carbide tips. grinding 5-6 seconds.
Make sure that the carbide tip has the same NOTE! These times are grinding times.
thickness as the original tips. Recommended Longer grinding times give a better surfa-
grit size of diamond wheel for side grinding ce finish and extend tooth life. Always use
is D91 or D126. A softer diamond wheel automatic grinding machines! Use plenty of
gives lower grinding pressure which redu- coolant.
ces the risk of burning. The downside is the
higher wear of the diamond wheel. TOP GRINDING
EAM
27.
Centre hole H7 / H8 H7 H8
6,1 - 10 mm 0 till +0,015 mm 10,1-18 mm 0 till +0,027 mm
The tolerance H7/H8 depends on the
10,1-18 mm 0 till +0,018 mm 18,1-30 mm 0 till +0,033 mm
centre holes diameter and is always a + 18,1-30 mm 0 till +0,021 mm 30,1-50 mm 0 till +0,039 mm
tolerance. H7 is used up to centre hole 30,1-50 mm 0 till +0,025 mm 50,1-80 mm 0 till +0,046 mm
100 mm there after is H8 applied. Except 50,1-80 mm 0 till +0,030 mm 80,1-120 mm 0 till +0,054 mm
saw blades for electrial hand saws and saw 80,1-120mm 0 till +0,035 mm 120,1-180mm 0 till +0,063 mm
blades for building industries where H8 is 120,1-180mm 0 till +0,040 mm
applied.
Keyways
Pin holes
Screw holes
Annealing
Tensioning
BLADE DIAMETER UNITS
Saw blades are tensioned from 200 mm 200-300 3
diameter. Tolerance +2/-1 units. 301-350 5
351-420 6
421-600 10
601-800 12
28.
Front grinding
Width/ Clearance
29.
30.
recommended
operations
sawblade
quality
page
Sawmill p.34-45
32.
recommended
sawblade
material
quality
page
Building boards Fine E10, E13 p.78
Highline
Middle B16T2, B19T2, E19 p.76, 79
Rough B31, B26T2, E26 p.76, 79
Metal
Unhardened steel S13/ Upon request p.74
Stainless steel S13/ Upon request p.74
33.
HEWSAW
13°
b
15
1°
°
B
Ari/ Vislanda
Pre-sawing. Rake angle is made according to your
needs, 15-25 degree. Chamfered gullets. Surface fi-
nishing ”oxide coating”.
Post-sawing, can also be manufactured reversible. Sur-
face finishing ”oxide coating”.
D B b c z FH
13°
b
15
1°
660 4,0 2,9-7,0 460 60 12/13/530-R
°
B
660 4,0 2,9-7,0 460 60 12/13/530-L
söderhamn 660 4,7 3,7-7,0 460 60 12/13/530-R
Pre-sawing. Rake angle is made according to your 660 4,7 3,7-7,0 460 60 12/13/530-L
needs, 15-25 degree. Chamfered gullets. Surface fi-
nishing ”oxide coating”.
. 588 8,0 7,0 460 48 6/13/496-R
625
D B4,0 3,2-6,0
b 480
c z48 16/16/545-R
FH
588 8,0 7,0 460 48 6/13/496-L
630 8,4 7,0 460 60 6/13/530-R
625 4,0 3,2-6,0 480 48 16/16/545-L
630 8,4 7,0 460 60 6/13/530-L
650 4,4 3,4-6,0 480 48 16/16/545-R
13°
1°
°
720 4,1 3,1-6,0 560 60 18/16/605-R 735 4,6 3,6-7 460 72 12/28/520-R
720 4,1 3,1-6,0 560 60 18/16/605-L 735 4,6 3,6-7,1 460 72 12/28/520-L
34.
b
15
1°
°
iggesund
Pre-sawing. Rake angle is made according to your
needs, 15-25 degree. Chamfered gullets. Surface fi-
nishing ”oxide coating”.
D B b c z FH
25
1° b
-30
°
HewSaw
Pre-sawing. Chamfered gullets. Surface finishing ”oxide
coated”.
Note! Is also avaliable with removable wiper slots to
reduce the amount of resin sticking to the blade during
winter time, and to limit the risk of getting stuck.
D B b c z info
1°
15
°
30AA46R
fact
Swedex continues to grow as a supplier to the
sawmill industry. Today we manufacture blades
for the wide range of sawmill machines and can
customise them entirely according to your needs.
All sawblades can be delivered with our surface
finishing ”oxide coating” if required. Oxide coa-
10°
27
1° b
-3
B
collecting on the body of the blade.
27aa44r We also produce the blades with Stellite- sawtips.
Ripping saw blade for HewSaw. Can be supplied with
the surface finishing ”oxide coating”.
You are welcome with your
D B b c z RS info
251 3,6 2,4 55 18+3 50 Middle blade inquiry!
251 3,6 2,4 55 18+3 50 Outer blade
Blade facts
A carbide tipped blade is a precision tool that
10°
27
1° b
30
°
30aa36r
Ripping saw blade for HewSaw. Can be supplied with
the surface finishing ”oxide coating”.
D B b c z RS info
351 3,6 2,4 70 30+2+2 50+40 Outer blade
351 4,0 2,8 70 30+2+2 50+40 Middle blade
351 4,2 3,0 70 30+2+2 50+40 Middle blade
10°
1° b
30
°
30aaxxr
Ripping saw blade for HewSaw. Can be supplied with
the surface finishing ”oxide coating”.
D B b c z RS info
1° 10°
b
27
°
45° 1 2
B
0.3
27ea39
Ripping green wood, soft and hard. Maximum cutting
depth 150 mm.
b
D B b z
10°
1°
500 4,0 2,8 40
30
°
B
560 4,4 3,0 44
30aa46 610 4,4 3,0 48
Ripping saw blade for Ari/Vislanda. Can also be deliv- 650 4,4 3,0 52
ered with trapezoidal teeth (EA) or alterning teeth 700 4,4 3,0 56
(BA).
D B b c z
700 4,0 2,0 spl2 alt. Can Drive 48 1°
10°
b
700 4,2 2,8 spl2 alt. Can Drive 48
27
°
45° 1 2
700 4,4 4,4 spl2 alt. Can Drive 48 B
0.3
27ea39t2
1° Ripping green wood, soft and hard. Small kerf. Maxi-
mum cutting depth 120 mm.
10°
b
30
°
1 2
B D B b z
°
10
1°
13°
b
22°
1°
13°
1 2
b
B
22°
°
10
1 2
B
22ba26
°
10
D B b z
D B b z
500 4,0 2,8 60
500 4,0 2,8 50
560 4,4 3,0 64
560 4,4 3,0 56
610 4,4 3,0 72
610 4,4 3,0 60
650 4,4 3,0 78
650 4,4 3,0 64
700 4,4 3,0 84
700 4,4 3,0 72
1°
13°
b
22°
1°
13°
b 1 2
B
22°
°
10
1 2
B
22ba26t2
°
10
20
3°
b
-30
1°
°
sp
D B b c z
b
25
1°
Linck 480 4,7 3,5 150 22+2+2+2
°
B
Söderhamn 485 4,4 3,2 spl 28+2+2
Linck 500 4,4 2,8 140 36+2+2 25aa79r
Linck 520 4,6 3,0 150 24+2+2 A stable saw blade that manages high pressure. The
Linck 540 4,6 3,2 150 24+2+2+2
blade is manufactured for green, soft wood with a lar-
ge cutting depth. The blade has big gullets.
Linck 540 4,6 3,2 150 30+2+2
Heinola 556 3,6 2,4 260 36+3 D B b z RS flange cut. depth
Heinola 556 4,2 2,8 160 32+2+2 300 4,0 2,8 12+2+2 40+40 90 90
Heinola 556 5,3 3,9 130 36+3+3 350 4,2 2,8 14+2+2 50+40 90 100
EWD 560 5,0 3,8 160 24+3+3 380 4,2 2,8 16+2+2 50+50 90 110
Linck 560 4,4 3,0 150 36+2+2+2 400 4,2 2,8 16+2+2 60+50 100 120
EWD 560 4,6 3,2 160 42+3+3 450 4,4 3,0 18+2+2 70+60 120 140
Linck 580 5,9 4,3 150 28+2+2+2 500 4,6 3,2 20+2+2 70+70 130 150
SAB 590 5,9 4,3 150 28+2+2+2 560 4,6 3,2 22+2+2+2 70+50+50 130 180
40.
b
27
°
45° 1 2
B
0.3
27ea60
Ripping green wood. Large diameter. Can be delivered
with carbide metal, HW, (EA) and Stellite (BA). - ex-
cludes packaging.
D B b z
800 4,4 3,0 42
900 4,4 3,0 48
1000 4,6 3,2 52
1100 5,0 3,6 56
1200 5,0 3,6 62
1 2
conventional
Conventional ripping saw blade with large diameter.
Pre-sharpened and pre-set. - excludes packaging.
D b z
800 3,0 60
900 3,0 60
1000 3,2 60/70
1100 3,6 60/70
1200 3,6 60/70
41.
13° 22AA27R
1°
12
°
b
1 2
B
°
15
catech
Surface finishing ”oxide coated” (to reduce friction
and coating on the saw blade).
D B b c z
22
13°
-2
7°
1° b
B 22
10-
-2
söderhamn
13°
7°
1° b
B
350 5,2 3,8 28+4
ahlström 400 5,2 3,8 32+2
Surface finishing ”oxide coated” (to reduce friction 400 5,2 3,8 32+4
and coating on the saw blade). 450 5,2 3,8 36+2
D B b c z PH
450 5,2 3,8 36+4
350 5,0 3,6 150 36 2/12/170 25aa30 500 5,2 3,8 40+2
350 5,0 3,6 150 56 2/12/170 24aa19 500 5,2 3,8 40+4
42.
1°
10°
b
27
°
45° 1 2
B
0.3
ari
Surface finishing ”oxide coated” (to reduce friction
and coating on the saw blade).
D B b c z PH
1°
10°
b
27
°
45° 1 2
B
0.3
27ea30b2
Edging saw blades suitable for green, soft wood with
high feed. State information about centre-bore and
pin-hole when ordering. Can also be delivered with
straight teeth (AA) or alternating teeth (BA).
D B b z
1°
b -5
13°
°
1 2
B
°
10
1°
b
-5
13°
1 2
°
B
°
10
n5ba16d
Trimming saw blade for machines using down cut feed.
D=copper rivets.
D B b z cut depth
1°
-5
13°
b °
1 2
B
°
10
n5ba19d
Trimming saw blade for machines using down cut
feed.
D=copper rivets.
D B b z cut. depth
Highline 400 3,5 2,5 64 16-150 mm
450 4,0 2,8 72 16-150 mm
500 4,0 2,8 80 16-150 mm
44.
1°
b
13°
8
1 2 °
B
°
10
8ba13d
Trimming saw blade for machines using up cut feed.
D=copper rivets.
1°
b
13°
10
1 2
°
B
°
10
10ba16d
Trimming saw blade for machines using up cut feed.
D=copper rivets.
D B b z cut. depth
1°
b
13°
10
1 2
°
1°
B b
°
10
13°
10ba19d
10
°
1 2 B
°
10
22AA46SR
1° b
22°
350 >100 60
B
22aa46sr 400 70
Saw blades with guard teeth and wiper slots. For soft
and hard solid wood.The table shows our recommen-
ded maximum cutting depth.
D B b z RS cut. depth max. flange
D c-bore RS length
160 25
180 25
200 25
225 ≤70 35
225 >70 25
250 ≤70 50
250 >70 35
13°
1° b
22°
280 50
22aa46r
B
300 ≤70 60
Saw blades with round back and wiper slots. For soft 300 >70 50
and hard solid wood. The table shows our recommen-
ded maximum cutting dept. 315 ≤80 70
315 >80 60
D B b z RS cut. depth max. flange 350 ≤100 70
225 2,8 1,9 16+2 25 35 120 350 >100 60
225 2,8 1,9 16+2 35 45 110 400 70
225 3,2 2,2 16+2 25 35 120
225 3,2 2,2 16+2 35 45 110
250 2,8 1,9 16+2 35 45 140
250 2,8 1,9 16+2 50 60 110
250 3,2 2,2 16+2 35 45 140
250 3,2 2,2 16+2 50 60 110
280 2,8 1,9 18+2 50 60 130
13°
0.7
1° b
315 2,8 1,9 20+2 70 80 125 200 2,0 1,4 16+2 25 30 110
315 3,2 2,2 20+2 60 70 145 200 2,5 1,8 16+2 25 30 110
315 3,2 2,2 20+2 70 80 125 225 2,0 1,4 18+2 25 30 130
350 3,2 2,2 24+2 60 75 180 225 2,5 1,8 18+2 35 40 110
350 3,2 2,2 24+2 70 85 160 250 2,5 1,8 20+2 35 45 140
350 3,5 2,5 24+2 60 75 180 250 2,8 2,0 20+2 50 60 110
350 3,5 2,5 24+2 70 85 160 280 2,8 2,0 22+2 50 60 130
400 3,2 2,2 28+2 70 85 210 300 2,8 2,0 24+2 60 70 135
400 3,5 2,5 28+2 70 85 210 300 2,8 2,0 24+2 70 80 115
47.
25AA25BO
1° b
13°
25
/18
B
°
Swedex extreme
A saw blade with a special surface finishing for redu-
ced friction. Hollow ground front. Maximum cutting
depth 50 mm.
D B b c z
b
22
B
/1
10°
7°
25
22/17aa15
°
25aa25bo
The teeth have convex ground sides, which results in The teeth have a special front grinding (bevelled) for a
a very smooth cutting-surface. Surface finishing ”oxide better cutting result. Surface finishing ”oxide coated”.
coated”. Maximum cutting depth 50 mm. Maximum cutting depth 30 mm.
D B b c z D B b c z
13
°
1° b 1° b
22°
13°
22
B B
°
22aa19 22aa39
Ripping in moulders with normal surface require- Ripping in moulders with lower feed speed.
ments. Maximum cutting depth 30 mm.
D B b c z
D B b c z
225 3,2 2,2 60 18
225 3,2 2,2 60 36
250 3,2 2,2 60 20
250 3,2 2,2 60 40
13
1° b
13°
1° b
22°
22°
B
B
22aa26 22aa39b2
Ripping in moulders with normal surface require- Ripping in moulders with lower feed speed.
ments. Maximum cutting depth 50 mm.
D B b c z D B b c z
225 3,2 2,2 60 28 180 3,2 2,2 14
250 3,2 2,2 60 30
49.
22AA39
13
°
1° b
22°
B
22aa39b2
The same as 22AA39 bur more stable. Can also be
used as an outer blade. Maximum cutting depth 150
mm.
Can be delivered with trapezoidal teeth (EA).
PH Combi/ see catalogue page 19. D B b z
Standard on this side´s products at di-
ameter 250-400 mm when bore is 30 180 3,2 2,2 14
mm. 200 3,2 2,2 16
225 3,5 2,5 18
250 3,5 2,5 20
280 3,5 2,5 22
300 3,5 2,5 24
350 4,0 2,8 28
13
b
13
1°
22°
1° b
22°
B
B
22aa39 22aa39t2
Ripping saw blade for solid wood. Rough ripping. Max-
imum cutting depth 150 mm. Thin kerf. The same as 22AA39 but with smaller kerf.
Can also be delivered with trapezoidal teeth (EA). Maximum cutting depth 120 mm. Can also be delive-
red with trapezoidal teeth (EA).
D B b z
b
22°
1 2
B
Additionally we produce blades with a gu-
°
10
D B b z
PH Combi/ see catalogue page 15.
160 2,8 1,9 16 Standard on this side´s products at di-
180 2,8 1,9 18 ameter 250-400 mm when bore is 30
200 2,8 1,9 20 mm.
225 3,2 2,2 22
250 3,2 2,2 24
280 3,2 2,2 28
300 3,2 2,2 30
350 3,5 2,5 36
400 3,5 2,5 40
1°
13°
1 2
B
°
10
1°
13°
22ba26
b
22°
1 2
B
°
10
22BA19
1°
13°
b
22
°
1 2
B
°
10
22ba19
Universal blade. Normal kerf. For ripping of hard and
soft wood. Maximum cutting depth 70 mm.
D B b z
1° 150/160 2,8 1,9 24
b
13°
1 2
B
°
1°
13°
b
22
°
1 2
B
°
10
22ba19t3
PH Combi/ see catalogue page 19. Universal saw blade. Extra small kerf. Very low cutting
Standard on the article R,RM and RT at resistance. is used for edge trimming in thin dimensi-
diameter 250-400 mm when bore is 30 ons. Maximum cutting depth 30 mm.
mm.
D B b z
125 2,0 1,3 20
150/160 2,0 1,3 24
180 2,0 1,3 28
200 2,0 1,3 32
225 2,4 1,6 36
1°
250 2,4 1,6 40
13°
1 2
B 315 2,4 1,6 48
°
10
20
6EA10
1°
b
13°
6°
1 2
B
°
10
6ba10
Extra close-toothed trimming saw blade for lamina-
ted materials and plastics. For use when a good sur-
face finish is required, including wood. Equipped with
Swedex Long-life teeth for maximum wear resistance
and extra long lifetime. For abrasive materials we re-
commend trapezoidal teeth (EA). Maximum cutting
depth 50 mm.
45° 1 2 B
200 2,8 1,9 64
0.3
1°
b
13°
6°
1 2
B
°
10
6ba10t2
Extra-close toothed trimming saw blade with small kerf.
For laminates and plastics. For use when a good surfa-
ce finish is required. Equipped with Swedex Long-life
teeth for maximum wear resistance and extra long
lifetime. Maximum cutting depth 30 mm.
D B b z
6°
1 2
B
°
10
6ba10t3
1°
Cross-cutting saw blade with extra small kerf. For thin b
plastic profiles, plexiglass etc. Maximum cutting depth
13°
6°
20 mm. 1 2 B
°
20
D B b z
126 2 1,3 40
150/160 2,0 1,3 48
Dimter fast cut/ 6ba11
Close-toothed saw blade for ”Opti cut” saws. Extra
180 2,0 1,3 56 stable saw-body. Differentiated tooth pitch along with
200 2,0 1,3 64 copper rivets in the slots.
250 2,4 1,6 80 D B b c-bore z
Highline 300 2,4 1,6 96 450 4,8 3,5 30 128
Highline 350 2,8 1,9 112 500 4,8 3,5 30 144
Highline 400 2,8 1,9 120 600 4,8 3,5 30 170
55.
8BA13
1°
b
13°
8
1 2 °
B
°
10
8ba13
Close-toothed trimming saw blade for veneered and
laminated materials. For use when a good surface finish
is required, including wood. Maximum cutting depth 75
mm. Can be delivered with Long-life carbide teeth.
8°
56.
1°
b
13°
10
1 2
°
B
°
10
10ba16
Trimming and panel sizing saw blade. Standard blade
for the carpentry and furniture industry. Is used for the 1°
10
B
carbide teeth.
°
10
57.
D B b z
45° 1 2
15
B
0.3
13
°
The blade is very noisy, especially when idling, why?
°
45° 1 2 B
-The blade goes to oscillation (self-vibration)
0.3
6EA10
1° b
13°
10
°
° B
20
1°
b 10eaxh16
13°
Panel sizing saw blade for vertical saws. For panel sizing
6°
1 2
45° B
of laminated or varnished boards with high require-
0.3
10
5°
b
13°
10
1 2
B
°
10raba
Scoring saw blade with alternately bevelled teeth
with conical sides (RABA). Can also be supplied with
straight teeth (AA), Is equipped with Long-life tips as
standard.
D B b z
120 4,4-5,4 2,8 24
125/127 4,4-5,4 3,0 24
140 4,4-5,4 3,0 28
150 4,4-5,4 3,0 36
160 4,4-5,4 3,0 36
5°
180 4,4-5,4 2,8 36
b 200 4,4-5,4 3,2 36
13°
10
B
°
1° b
1°
13°
6-
b
8-
B
10
13°
°
6°
1 2 B
leuco
°
20
b
6-
8°
B
13°
8
°
1 2
B
homag
°
10
6°
leuco
For panel saw blade of laminated or non-laminated
boards. Manufactured with Long-life carbide tips. Right
hand bevelled (CA) or left hand bevelled (DA) teeth.
1°
D B b c z FH b
13°
200 4,0 2,8 80 ´64-4 4/6,5/140-L 6aa10 1 2
10
B
°
°
20
200 4,0 2,8 80 ´64-4 4/6,5/140-R 6aa10
220 4,0 2,8 80 ´64-4 6/6154-L 6aa11 10ca/da16
6aa11 Trim saw blade for edge trimming. Manufactured with
220 4,0 2,8 80 ´64-4 6/6154-R
Long-life carbide tips. Right hand bevelled (CA) or left
250 4,0 2,8 80 ´78-6 6/6,5/200L 6aa10 hand bevelled (DA) tetth.
250 4,0 2,8 80 ´78-6 6/6,5/200R 6aa10 D B b c z PH
250 4,0 2,8 80 ´78-6 6/6,5/200L 6aa10 100 3,2 2,2 32 20 2/4/52
250 4,0 2,8 100 ´78-6 6/6,5/200R 6aa10 100 3,2 2,2 32 20 2/4/52
segments
1° b
13°
10
B
°
leuco
Segments for Leuco hoggers.
D B z
Standard 6,0 2,8 4,0
High 6,0 2,8 4,0
63.
20AA26
13°
1° b
20°
B
20AA26 D B b z
20aa26man
D B b z
b
1° 125 4,0 3,0 16
22°
6BA8T3
1°
b
13°
6°
1 2 B
°
10
6ba6t3
Extremely close-toothed saw blade with extra small
kerf. For very thin hard plastics.. Can also be delivered
with alternately bevelled teeth with chamfer (BAE). PH
Combi. Surface finishing ”oxide coated”.
D B b z
160 2,0 1,3 84
1°
180 2,0 1,3 94 b
13°
200 2,0 1,3 104
6°
1 2
B
°
D B b z
6°
1 2 B
150/160 2,8 1,9 48
°
10
1 2
B
°
6ba10t2
Same as 6BA10 but with smaller kerf. Saves material
and decreases the cutting resistance. Equipped with
Swedex Long-life teeth for extra long lifetime. Can
also be delivered with alternately bevelled teeth with 1° b
chamfer (BAE).
13°
6°
D B b z
B
1 2
B
°
b
nately bevelled teeth with chamfer (BAE).
22°
1 2
B
°
10
D B b z 22ba30
150/160 2,0 1,3 48 Saw blade for soft plastics like nylon, styrofoam, pvc etc.
180 2,0 1,3 56 D B b z
17
b
°
45° 1 2 B
negative rake angle. Positive rake angle is
0.3
used for automatic feed and negative rake
angle for manual feed. For material thick- 5eam10
ness above 10 mm a positive rake angle Positive rake angle.
might be preferable even when using ma- 1° b -2°
nual feed.
17
°
45° 1 2 B
0.3
1°
b
n2eam10
Close-toothed saw blade for thin-walled metals and
17
45° 1 B
ned saw-body for decreased noise (as from D=300
-2°
0.3
n2eam8
0.3
D B b z
5EAM10
Saw blades for non-ferrous metals such as
aluminium, copper and brass but also for
plastic etc. The saw blades are
manufactured with either positive or
negative rake angle. Positive rake angle is
used for automatic feed and negative rake
angle for manual feed. For material thick-
ness above 10 mm a positive rake angle
might be preferable even when using ma-
nual feed.
D B b z
45° B
200 2,8 2,0 40
0.3
1°
b
17°
2
7°
45° 1 B
0.3
7eam19
Positive rake angle.
1° b
-2°
17°
45° 1 2 B
0.3
n2eam19
Saw blade for cutting solid metals, having material
thickness of 30 mm and above. Differentiated tooth
pitch. Laser dampened saw-body for decreased noise
(as from D= 300 and larger). Negative rake
angle.
D B b z
H5EAM10
1°
b
1°
17°
b
5° 1 2
5°
45°
17
B
°
0.2
45° 1 2 B
0.2
H5eam10 h5eam13
Saw blade for cutting profiles and massive aluminium.
Close-toothed saw blade for thin-walled metals and material thickness up to 13 mm. Positive rake angle.
har plastics. Maximum material thickness 7 mm. Positi-
ve rake angle. D B b z
Highline 370 4,0 3,2 76
D B b z
Highline Highline 400 4,0 3,2 80
370 4,0 3,2 114
Highline Highline 420 4,0 3,2 84
400 4,0 3,2 120
Highline Highline 450 4,0 3,2 90
420 4,0 3,2 132
Highline Highline 500 4,0 3,2 100
450 4,0 3,2 144
Highline Highline 550 4,4 3,4 108
500 4,0 3,2 160
Highline 600 4,4 3,4 120
1°
b
1°
b
17°
2
17°
45° 1
7°
45° 1 2 B
5°
0.2
B
0.2
h5eam16 h5eam19
Saw blade for cutting solid metals and profiles having a Saw blade for cutting solid metals. maximum material
thickness up to 20 mm. Positive rake angle. thicknes 30 mm. Positive rake angle.
D B b z D B b z
Highline 370 4,0 3,2 90 Highline 370 4,0 3,2 60
Highline 400 4,0 3,2 96 Highline 400 4,0 3,2 64
Highline 420 4,0 3,2 100 Highline 420 4,0 3,2 68
Highline 450 4,0 3,2 108 Highline 450 4,0 3,2 72
Highline 500 4,0 3,2 120 Highline 500 4,0 3,2 80
Highline 550 4,4 3,4 132 Highline 550 4,4 3,4 90
Highline Highline
600 4,4 3,4 144 600 4,4 3,4 96
72.
1°
b -6°
13°
45° 1 2
45° B
0,25
n6ea13sp
Special saw blade for cutting thin-walled sheets of ste-
el, single sided or double sided coated on hard foam
or similar. For machines where the material is firmly
attached.
D B b z
1° 12
b °
13°
2 45° B
12ee16sp
Special saw blade for cutting thin-walled sheets of ste-
el, single sided or double sided coated on hard foam
or similar. For machines where the material is firmly
attached.
D B b z
Highline 500 4,2 3 96
73.
S13
0,5
b
* Laser dampened saw body. The saw
°
blade has laser cut slots filled wint
30
0°
10°
°
13° 0°
0.6
13°
10
°
0.8
0.8
1 2
brush cutter
Swedex brush cutter saw blade are suitable for the
main occuring brush cutters on the market. The saw
blades are side set and sharpened.
D B c z
B26T2
1°
13°
1°
b b
22°
13°
1 2
22
B 1 2 B
°
°
10
°
10
b31 b19t2
Coarse-toothed saw blade for ripping and cross-cut- Close-toothed saw blade for ripping and cross-cutting.
ting. For high requirements of the cutting finish.
* Negative
D B b z
D B b z
300 3,2 2,2 30
300 2,8 1,8 48
305* 3,2 2,2 32
315 2,8 1,8 48
315 3,2 2,2 30
350 3,2 2,2 56
350 3,5 2,5 36
400 3,2 2,2 64
400 3,5 2,5 40
1° 1°
b b
13°
13°
10
1 2
22°
1 2 B
°
B
°
10
°
10
b26t2 b16t2
Normal toothed saw blade for ripping and Close-toothed saw blade for ripping and cross-cutting.
cross-cutting. For high requirements of the cutting finish.
* Negative
D B b z
D B b z
204 2,6 1,7 24 300 2,8 1,9 60
300 2,8 1,8 36 305* 2,8 1,9 60
350 3,2 2,2 42 350 3,2 2,2 70
400 3,2 2,2 48 400 3,2 2,2 80
76.
1°
b
13°
15
1 2
°
B
°
10
randek
Swedex delivers saw blades to Randek-mashines.
15BA18Dsp is the standard we have in stock. If you
need an other dimension contact us for quotation.
D B b c z
E10
1°
b
13°
8
°
1 2
B
°
10
e13
Close-toothed saw blade for parquet, laminated
material, ledges and thin plastics.
D B b z
1°
b 125 2,5 1,5 30
13°
6°
1° 1°
b b
13°
13°
15
22°
1 2 2
°
B B
°
°
10
10
e19 e26
Close-toothed saw blade for ripping and cutting of all Normal-toothed saw blade for ripping and cutting
kind of wood and boards. For high requirements of the of all kind of wood and boards.
cutting surface.
D B b z
D B b z
125 2,5 1,5 16
125 2,5 1,5 20
130 2,5 1,5 16
130 2,5 1,5 20
140 2,5 1,5 16
140 2,5 1,5 24
152 2,5 1,5 16
152 2,5 1,5 24
160 2,5 1,5 16
160 2,5 1,5 24
Highline 165 2,5 1,5 16
Highline 165 2,5 1,5 24
170 2,5 1,5 20
170 2,5 1,5 28
180 2,5 1,5 20
180 2,5 1,5 28
184 2,5 1,5 20
184 2,5 1,5 28
185 2,5 1,5 20
185 2,5 1,5 28
Highline 190* Highline 190* 2,5 1,5 24
2,5 1,5 32
200* 2,5 1,5 24
200 2,5 1,5 32
210* 2,8 1,8 24
210* 2,8 1,8 32
Highline 216* 2,8 1,8 24
216* 2,8 1,8 32
220 2,8 1,8 28
220 2,8 1,8 36
230 2,8 1,8 28
230 2,8 1,8 36
235 2,8 1,8 28
235 2,8 1,8 36
240 2,8 1,8 30
240 2,8 1,8 36
Highline 250* 2,8 1,8 30
Highline 250* 2,8 1,8 40
260* 2,8 1,8 30
260 2,8 1,8 40
250* 2,8 1,8 30
79.
N15KA59
-1
13°
1° 5°
b
45° 1
B
n15ka59
Saw blade produced for rescue work and cutting
in most materials. For example plate, tar paper and
single thin iron profiles.
D B b c z
for grinderies
Swedex provides all supplies you need for manu-
facturing, regrinding and reparation for your saw bla-
des.
We are available for technical advising!
81.
-When using manual feed, a negative hook angle results in a softer cut.
-Positive hook angle is recommended if automatic feed is used. A blade with more
teeth results in a softer cutting.
82.
84.