Professional Documents
Culture Documents
t h e
i n n o v a t i o n s . o f . c u s t o m e r s
Leak - Proof
Flow & Control The Best Partner
for Value Creation
Solution Partner
Check & Relief Valves
Check & Relief Valves
2
Index Check & Relief Valves
SCP30
7
Series
SCA30
8
Series
SCH60
9~11
Series
3
W e . s u p p o r t . t h e
i n n o v a t i o n s . o f . c u s t o m e r s
Leak - Proof
Flow & Control The Best Partner
for Value Creation
Solution Partner
Check Valves
Check Valves
SCV30 SCP30
SCA30 SCH60
SCV30 Check Valves
Note -When the check valve is not actuated for a period of time, it may
require initially crack at higher than the above cracking pressure ranges.
-Check valves are designed for directional flow control only. Therefore
HANSUN check valves should never be used as code Safety relief devices.
5
Check Valves SCV30
① ⑤ ④
Materials of Construction
Valve Body Materials
Item Description
S316 Brass
Inlet Outlet
1 Body
S316/A479, A276 Brass
2 Connector
H ◀ I ◀ h 3 Poppet S316/A479, A276 Brass/B16
◀
L ◀ 4 Spring S302
5 O-ring Viton
③ ② Silicone-based Lubricant for poppet.
Wetted parts are listed in orange color.
6
SCP30 Check Valves
Technical Data -Spring Cracking, Reseal and Back Pressure@70! (21"). Materials of Construction
Spring Nominal Applied Working Pressures–psig(bar) Valve Body Materials
Reseal Pressure Item Description
Cracking Pressure Min. Pressure Max. Pressure S316 Brass
psig bar psig bar psig bar psig bar 1 Body
up to 6 0.41 2 Poppet S316
1/3 0.02 0 0 3 0.21 Brass
Back pressure 3 Insert /A276, A479
up to 5 0.34 4 Locking Screw
1 0.07 0 0 4 0.28
Back pressure 5 Spring S302/A313
10 0.69 7 0.48 15 1.03 3 0.21 6 O-ring Viton NBR
25 1.72 20 1.38 30 2.07 17 1.17 Silicone-based Lubricant for poppet.
Wetted parts are listed in orange color.
④ ③ ⑥ ② ⑤ ①
7
Check Valves SCA30
H
Materials of Construction
④③ ⑧ ⑦ ⑤⑥ Valve Body Materials
Item Description
S316 Brass
1 Body
Inlet Outlet
2 Poppet
3 Insert S316 Brass
4 Insert Lock Screw /A276, A479
5 Adjusting Screw
② ① 6 Locing Screw
◀
L ◀ 7 Spring S302/A313
8 O-ring Viton NBR
Silicone-based Lubricant for poppet.
Wetted parts are listed in orange color.
8
SCH60 Check Valves
Features
•Pressure rating up to 6000psi (413bar)@70!(21").
•Temperature rating up to 375!(191")with standard Vition O-ring.
•S316 Stainless steel body as standard.
•Suitable for gas and liquids.
•Cracking pressures include :#1/3, 1, 3, 10, 25, 50psi.
•Heat code traceability.
•Every valve is 100% factory tested for cracking and reseal.
Technical Data
Description S316
Series SCH1 SCH2 SCH3
Flow Coefficient (Cv) 0.67 1.8 4.7
Working Pressure and Back Pressure 6000psi (413bar) 5000psi (344bar)
@ 70! (21") 70! (21")
Operating Temperature Range Viton : -10! to 375! ( -23" to 190")
Nominal Cracking Pressure 1/3, 1, 5, 10, 25psig
Materials of Construction
⑦ ⑧ Item Description
A479Valve Body Materials
Material Grade ASTM Speccification
1 Body
② 2 Connector S316
⑥ 3 Indicator Ring A479 or A276
① ③ ④ ⑤ 4 Poppet Viton-bonded S316
5 Poppet Stopper S316
6 Spring S302 A313
7 O-ring Viton
8 Back Up Ring PTFE
Silicone-based Lubricant for poppet.
Wetted parts are listed in orange color.
9
Check Valves SCH60
1/3 psi
Inlet Outlet
H ◀
I ◀ h
◀
L ◀
10
SCH60 Check Valves
•Testing
-Every valve is factory tested for cracking and reseal performance.
•Ordering Information
SCV3 S 8T 1/3 NB S6
Series Designator End Connection Inlet-Outlet Size Cracking Pressure O-ring Material Body Material
by Orifice Size Designator Designator Designator Designator Designator
•1/3:1/3psi •NBR :#NB Nill for Brass Valve •S6 : S316 Stainless Steel
•1 : 1psi •Viton : VT Nill for S316 Valve •BS : Brass
•3 : 3psi •EPDM :#EP
•10 : 5psi •Kalez : KA
•25 : 25psi
11
W e . s u p p o r t . t h e
i n n o v a t i o n s . o f . c u s t o m e r s
Leak - Proof
Flow & Control The Best Partner
for Value Creation
Solution Partner
Relief Valves
Relief Valves
SRV30, SRV60
SRV 30, 60 Relief Valves
Bonnet
• Cv= 0.60
• Orifice : 4.8 mm (0.19 in)
Cap Plug
SRV60 Series Technical Data
Cracking Pressure adjusting Cap
SRV60 blue label identifies • Maximum working pressure : 6,000 psig (413 bar)
the loaded spring • Orifice size : 3.2 mm (0.13 in)
Adjustable spring for a specific
• Cv= 0.41
cracking pressure
Locking Nut • Cracking pressure range :50 to 6000 psig (3.4 to 413 bar)
13
Relief Valves SRV 30, 60
Product Information
Materials of Construction
All dimensions shown are for referance only and are subject to change. Dimensions with S-lok nuts are in finger-tighten position.
How to Order
Please select the desired valves basic ordering number, the applicable seal, spring designator and CE certified options from the table below.
Example : SRV60-S-4T–NBR-A-S6
Factory pressure set valve
Seal Material designator Spring Designator Body Material
•To order, specify the set pressure in the valve ordering number
NIL :standard FKM Example : SRV60-S-4T-EP-60-S6 Valve without spring installed
Refer to spring •To order, do not specify spring designator on the ordering number
NBR : NBR Designator S6:S316 Example : SRV60-S-8T-NBR-S6
table1,2 NOTE : the valve with no spring installed with the label stated
EP : EPDM
“NO SPRING INSTALLED” on the adjusting cap
14
MEMO
HanSun Engineering Co., Ltd. Catalogue_Check & Relief Valves_201310
27 Noksansandan361-ro, Gangseo-gu
(Songjeong-dong), Busan, Korea
Tel : +82-51-899-6700, Fax : +82-51-899-6799
E-Mail : overseas@ehansun.co.kr
sales@ehansun.co.kr
Website : www.ehansun.co.kr, www.slok.co.kr