Professional Documents
Culture Documents
I. Overview
The YH-770 multi-function controller is a multi-function controller for the test bench
of the variable frequency speed control fuel injection pump at present. The controller
adopts the advanced single-chip microcomputer control technology. Measurement
control and display, fuel injection frequency control, and over-temperature indication,
and self-adaptive function, which can adapt to the control of different gears of
different oil pump test benches. Increase the unique anti-interference technology,
stable and reliable work, and can be applied to any brand of inverter.
2. Technical parameters
1. Storage of ten groups of spindle speed settings
2. Digital direct switching speed
3. When running (+) (-) keys to fine-tune the speed of each gear
4. Over-temperature indication of oil temperature
5. Power consumption: <20W
6. Temperature control range: 0~99.9℃ (precision 0.5℃)
7. Speed range: 20~4000r/min (0, 1, 2, 3~~~9 gears, 10 gears in total)
8. Number of injections: 50~4000 times
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
cutoff oil baffle will count again.
③Press (forward) or (reverse) key: start the forward and reverse rotation of the motor.
Press the (stop) key to stop the motor.
④Press the (L) key: use the left potentiometer to adjust the speed, press the (R) key:
use the right potentiometer to adjust the speed
Press (0)~(9) keys to directly reach the preset motor speed of each gear.
2. Parameter modification: (only when the motor is in a stopped state can be carried
out)
①Press the first (preset) key: the speed value can be modified, and the left nixie tube
in the speed window flashes at the same time. Use the (+) or (-) key to set the required
speed value.
②Press the second (preset) key: the number of injections can be modified, and the left
digital tube in the counting window flashes at the same time. Use the (+) or (-) key to
set the required number of times.
③Press the (preset) key for the third time: the upper limit of temperature (the
temperature rise indicator is on at this time) and use the (+) or (-) key to set the
desired temperature value.
④ Press the (Preset) key for the fourth time to set the temperature lower limit (the
temperature drop indicator light is on at this time). Use the (+) or (-) key to set the
desired temperature value.
④Press the fifth (preset) key to confirm and exit.
(Note: The upper temperature limit must be greater than the lower temperature limit)
3. The speed value can be fine-tuned when the motor is running
Press (+): to increase the speed value. Press (-) to decrease the speed value. Each time
you press the (+) or (-) key, the speed value will increase or decrease (1) revolution.
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
I. Visão geral
O controlador multifuncional YH-770 é um controlador multifuncional para a bancada de teste da
bomba de injeção de combustível de controle de velocidade de frequência variável atualmente. O
controlador adota a tecnologia avançada de controle de microcomputador de chip único.
Controle e exibição de medição, controle de frequência de injeção de combustível e indicação de
temperatura excessiva e função autoadaptável, que pode se adaptar ao controle de diferentes
engrenagens de diferentes bancos de teste de bomba de óleo. Aumente a tecnologia
anti-interferência exclusiva, trabalho estável e confiável e pode ser aplicado a qualquer marca de
inversor.
2. Parâmetros técnicos
1. Armazenamento de dez grupos de configurações de velocidade do fuso
2. Velocidade de comutação direta digital
3. Ao executar as teclas (+) (-) para ajustar a velocidade de cada marcha
4. Indicação de temperatura excessiva do óleo
5. Consumo de energia: <20W
6. Faixa de controle de temperatura: 0 ~ 99,9 ℃ (precisão 0,5 ℃)
7. Faixa de velocidade: 20~4000r/min (0, 1, 2, 3~~~9 marchas, 10 marchas no total)
8. Número de injeções: 50~4000 vezes
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
④ Pressione a tecla (Preset) pela quarta vez para definir o limite inferior de temperatura (a luz
indicadora de queda de temperatura está acesa neste momento). Use a tecla (+) ou (-) para
definir o valor de temperatura desejado.
④Pressione a quinta tecla (predefinida) para confirmar e sair.
(Nota: O limite de temperatura superior deve ser maior que o limite de temperatura inferior)
3. O valor da velocidade pode ser ajustado quando o motor estiver funcionando
Pressione (+): para aumentar o valor da velocidade. Pressione (-) para diminuir o valor da
velocidade. Cada vez que você pressionar a tecla (+) ou (-), o valor da velocidade aumentará ou
diminuirá (1) volta.
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
③Pé: Relé de tempo de injeção de combustível normalmente aberto ④Pé: Relé de tempo de
injeção de combustível normalmente fechado
⑤Pé: O número de relé de injeção de combustível é comum
D. Agulha de sede de 14 pinos (controle)
①Pé: Fio terra de controle de velocidade do inversor ACM ②Pé: Sinal de controle de
velocidade do inversor AVI
③Pé: DCM comum para frente/reverso ④Pé: inversor para frente FWD
⑤Pin: inversor reverso REV ⑥Pin: relé de aquecimento normalmente aberto
⑦Pin: relé de resfriamento normalmente aberto ⑧Pin: relé de aquecimento e resfriamento
comum
⑨Pé: bomba de óleo ⑩Pé: bomba de óleo
(12) Pé: Cabeça do meio do potenciômetro externo (regulação de velocidade esquerda)
(13) Pé: Cabeça do meio do potenciômetro externo (regulação de velocidade correta)
Nota: ⑧, ⑨
Email:
www.beacon-machine.com
Whatsapp:
Beacon Machine Manufacturing Co., Ltd.
Email:
www.beacon-machine.com
Whatsapp: