Professional Documents
Culture Documents
Informacion - DIWA VOITH
Informacion - DIWA VOITH
com
Higher efficiency
all along the line
DIWA.6 Efficiency Package
Efficiency in one
package …
2
Save fuel.
Minimize emissions.
Increase availability.
Consume less fuel, reduce complexity, increase driving DIWA.6 automatic transmission
comfort and economy, greater availability, drive down A new take on a proven principle: Lower consumption and
maintenance costs – there are many reasons to choose reduced emissions during operation, less complexity and low-
DIWA from Voith and now there is one more: the DIWA er installation costs for the manufacturer.
Efficiency Package.
SensoTop
More than just a transmission The standard shifting program for constant availability of opti-
The DIWA package, including the topography-dependent mum shift points – depending on topography, load condition
gear-shifting program SensoTop and Stop-Start Technology, and acceleration.
proves just how much more efficiency you can get from a
drive with a perfectly complementary system. This also applies DIWA Stop-Start Technology
to traffic concepts with high service frequency such as “Bus A technology which scores high not only in economy and ef-
Rapid Transit” (BRT), where only the most advanced drive ficiency, but also in high levels of comfort for passengers and
technology is capable of achieving the required efficiency. drivers alike.
3
DIWA.6: Less consumption,
lower emissions
Modern combustion engines are becoming cleaner and Greater efficiency = lower consumption
more efficient, and this trend is increasing due to the Euro The needs-based reduction in operating pressure is a signifi-
6 regulations which are now in force in many countries. cant benefit of the DIWA.6 system, whereby full operating
DIWA.6 from Voith is the answer to these increasing pressure is only produced if it is actually needed. As a result,
requirements: The redesigned housing reliably helps meet transmission efficiency is given a significant boost.
the greater demands with respect to noise emissions.
Intelligent start-up management and needs-based Lower consumption = less CO2
reduction of operating pressure reduce consumption by An additional converter design is provided for engines with
up to 5 %. higher torque. The new design of torsional vibration damper
allows shifts at even lower engine speeds. The benefits for you
are lower consumption and reduced CO2 emissions.
4
Intelligent start up = saving comfortably The proven DIWA power splitting principle
DIWA.6 combines automatic shift in neutral (ANS) with intelli- Allows stepless starting and braking across a speed range
gent start-up management: It prevents starting against the where other transmissions require two or three gear shifts.
active service brake. With the optimized ANS function, the This results in up to 50 % fewer gear shifts, higher driving
transmission can stay in neutral for longer, thus saving on fuel. comfort – and significantly lower wear in the driveline.
It also makes starting up on level routes more comfortable, so
that the driver can effortlessly join moving traffic.
0 a = shift 1 – 2
Start-up range
b a b
Conventional
Engine power
automatic transmission
Dimensions of transmission (dry) incl. retarder [kg] approx. 329 approx. 334 approx. 339 approx. 344
5
Optimum gear-shifting points
in any situation
Fuel-efficient driving with SensoTop
Flat or steep roads? Heavy or light loads? Where some Up to 7 % less consumption
manufacturers exclusively rely on driving dynamics Depending on the topography and the vehicle operation,
calculations, the inclination sensor provides additional SensoTop reduces fuel consumption by 2 % to 7 % compared
and precise information about the terrain of the route – so to conventional gear-shifting programs.
that SensoTop can steplessly adapt the gear-shifting
points in any situation – for maximum fuel efficiency. These is savings potential that can significantly reduce your
operating costs. At the same time, SensoTop makes an active
contribution to a cleaner environment, since CO2 emissions
are sustainably reduced.
Higher safety
SensoTop also increases the safety of passengers and drivers:
The gear-shifting concept eliminates gear hunting at upward
gradients and allows comfortable start-ups.
Munich 2%
Fuel reduction
6
Optimum gear-shifting points DIWA automatic transmission Reduced fuel consumption
in any situation with Stop-Start Technology: and optimized maintenance
Fuel-efficient driving with SensoTop The ideal urban bus transmission Smart Services
2
Flat or steep roads? Heavy or light loads? Where some Up to 7 % less consumption The new and unique Stop-Start Technology for the Voith The evolution of efficiency in urban traffic Voith has been a leading body in assessing and the end of the trip. In addition to this, SmartAssist Dashboard
manufacturers exclusively rely on driving dynamics Depending on the topography and the vehicle operation, DIWA.6 transmission provides a significant reduction in • Depending on the duty cycle, city buses spend interpreting fleet data in public mass transit for years. provides management with processed data to increase the
calculations, the inclination sensor provides additional SensoTop reduces fuel consumption by 2 % to 7 % compared fuel consumption. The resulting greater efficiency offers a up to 40 % of their operating time in idle mode By using the most up-to-date technology, we are able efficiency of vehicle operation.
and precise information about the terrain of the route – so to conventional gear-shifting programs. direct added value. Passengers, drivers and pedestrians • A reduction of up to 12 % in fuel consumption can to automatically capture information on driver behavior
that SensoTop can steplessly adapt the gear-shifting benefit from the reduced noise during stop times. be achieved, depending on application and data for maintenance and to save this and provide SmartMaintenance – intelligent monitoring of
points in any situation – for maximum fuel efficiency. These is savings potential that can significantly reduce your • No negative influence regarding startup readiness a customized assessment of it for the operator. Smart- the transmission
operating costs. At the same time, SensoTop makes an active in urban city applications Maintenance and SmartAssist from Voith Smart Services SmartAssist monitors the DIWA transmission at all times. The
contribution to a cleaner environment, since CO2 emissions • DIWA.6 Stop-Start Technology enables stop times are two modules for smarter driving in the future. system identifies critical parameters and thus creates the
are sustainably reduced. of up to 180 seconds conditions for predictive and optimal maintenance and repair
SmartAssist – significant increase in driving of the transmission, matched to the relevant conditions.
Higher safety performance
SensoTop also increases the safety of passengers and drivers: Fuel is not getting any cheaper. This makes it one of the At the highest level, SmartMaintenance also uses the traffic
The gear-shifting concept eliminates gear hunting at upward crucial items under operating costs. With SmartAssist, we light logic using the colors green, amber and red to combine
gradients and allows comfortable start-ups. offer an integrated platform to reduce the fuel consumption information on the condition and the temperature of oil and
of an entire fleet. SmartAssist consists of two major compo- transmissions across the entire fleet. For more extensive in-
nents: SmartAssist Live assists the driver while driving and formation, detailed analyses are also recorded in the dash-
provides summarized feedback regarding driving behavior at board.
2
Up to 7% less fuel consumption with SensoTop SensoTop benefits at a glance Benefits of the DIWA.6 Stop-Start Technology
++ Optimum gear-shifting points thanks to a
clever combination of maintenance-free
Brescia 7%
inclination sensor and driving dynamics Reduction of fuel Reduced CO2, NOX,
Zurich 5% calculation consumption by particulate and noise
Würzburg 3% ++ Low noise levels due to lower engine up to 12 % emissions
speeds
Dresden 6%
++ Higher passenger safety due to more
Heidenheim 4% comfortable start-ups More comfort for No change to the existing SmartMaintenance Dashboard
Berlin 2% ++ No gear hunting in demanding terrains passengers, drivers transmission required
and pedestrians
Munich 2%
Fuel reduction
Flat Slightly hilly Hilly Steep Up to a third less engine Proven in operation in
SmartCase Electronic
operating time more than 1 500 buses
Control Unit
DIWA Automatic
Transmission
6 7 2
Our Service –
Part of Your
Business.
Mobility Service
We are there to support you – whenever you need it! From
training your employees, delivering and fitting replacement
parts, and technical support to modernization, our high-
quality service will ensure that you are kept safe on the
road.
4
VT2197, en, 2018-08. Alle Daten und Darstellungen unverbindlich. Änderungen vorbehalten.
Voith Group
St. Poeltener Str. 43
89522 Heidenheim, Germany
Contact:
Phone +49 7321 37-4152
diwa@voith.com
www.voith.com