Professional Documents
Culture Documents
Post Mold Tooling Eng 00
Post Mold Tooling Eng 00
Customer:
IBERPLAST
Mold work order: 0NN5301
Mold ref. N°: 10063092/00
Preform/Bottle Ref. N°: PN004050_03 (50.6g)
0NN5301 -
3. COMPOSITION OF THE MANUAL At the moment of drafting, this manual was completely updated. However, for continuous improvements it is possible that
descriptions contained therein vary slightly from what delivered. This means that the product has been perfected in order
to satisfy any of yours requirements.
The mechanical manual consists of:
S.I.P.A. S.p.a. guarantees machine safety providing it as supplied. In particular, this SIPA machine cannot be run if only
1. a cover, where are identified the precise information to identify the product (device, machine, mould, etc.) and the one of its component parts is missing.
customer;"
2. an introductory part, explaining in few rows the informations referred to the use of the manual;
5. TECHNICAL SERVICE AND SPARE PARTS
3. a code index, where are described in addition to those the descriptions and the reference page.
4. the continued succession of all the spare parts lists with the relative drawing of the mechanical parts which constitute Technical Service
the product (device, machine, mould, etc.).
Whenever requesting service, it is always necessary to mention the product's identification data (device, machine, mould,
The spare parts lists are represented in table form and within are indicated, for each line, information of components etc.) present on the identification plate.
which comprise the assembly.
For any further requests for information, explanations or technical service, SIPA S.p.A. has established an After-Sales
The first line (1) of each table is dedicated to the assembly drawing, whose description (2) and code (3) are then reported Service department to help their customers.
in the cartouche of the same page and of the subsequent ones until a new table (spare part list). The rows subsequent
(4) to the first ones are dedicated to the spare part list of parts which make up the assembly. In each row from left to right Customer Service
there is: the position in the drawing (5), the code (6), the description (7), the unit of measurement (8) (if not present is to Please always refer to the following address for any information:
be understood as unit) and the quantity (9).
http://www.sipa.it
The cartouche is present on each page and indicates the following information:
SIPA Plastic & Packaging Division
1. the description related to the referenced assembly (2);
via Caduti Del Lavoro, 3
2. the date of editing of the manual (10);
31029 - Vittorio Veneto (TV) ITALIA
3. the code related to the referenced assembly (3);
Telephone +39 - 0438 - 91.15.11
If the drawing in the spare part list is not available, the manual will only report the table, together with the list of codes of
which the spare part list is composed and continues, to the next page, with another spare part list and where necessary Telefax +39 - 0438 - 91.22.73
with the corresponding drawing.
Page 2
0NN5301 -
E-Mail: sipa@zoppas.com
Website: www.sipa.it
Page 3
0NN5301 -
Parts Index
1006309200 POST MOULD TOOLING..................................................................................................... 5
Date 21/03/2019
POST MOULD TOOLING 1006309200
Page 5
0NN5301 -
5 204
Date 21/03/2019
END OF ARM TOOLING 2041789700
Page 6
0NN5301 -
201
100
101 102
Date 21/03/2019
COOLING PLATE END OF ARM TOOLING 3102703500
Page 7
0NN5301 -
103
100
Date 21/03/2019
COOLING TUBE END OF ARM TOOLING 3102760800
Page 8
0NN5301 -
200
202
203
Date 21/03/2019
SPACER END OF ARM TOOLING 3102767300
Page 9
0NN5301 -
201
200 202
Date 21/03/2019
LIFTING BRACKET END OF ARM TOOLING 3102795700
Page 10
0NN5301 -
200
Date 21/03/2019
MOLD SUPPORT END OF ARM TOOLING 3102771400
Page 11
0NN5301 -
7 2
Date 21/03/2019
AIR PICK 2041790000
Page 12
0NN5301 -
200 2
Date 21/03/2019
COOLING PLATE END OF ARM TOOLING 3102703600
Page 13
0NN5301 -
200
Date 21/03/2019
INDICATOR PLATE GRIP HAND 3034572601
Page 14
0NN5301 -
Date 21/03/2019
MOUNTING SUPPLY MANIFOLD 3013148100
Page 15
0NN5301 -
Date 21/03/2019
COOLING PIN END OF ARM TOOLING 3101391500
Page 16
0NN5301 -
200
Date 21/03/2019
TEMPLATE COLDHALF 3102771300
Page 17
0NN5301 -
Page 18
0NN5301 -
Page 19