Professional Documents
Culture Documents
xx or higher
Note that the Symbol and Motorola Wings were migrated to Extreme WiNG, and were
discontinued
Objective
This tutorial aims to configure WiNG v5.xx or above devices to work with ZooxWifi.
Prerequisites
● Own a WiNG Controller (Extreme)
● Own a WiNG antenna already adopted by the controller
● Owning a ZooxWifi
● fully and already functioning internet access
Some adjustments may be necessary due the client peculiar network settings. if this is the
case, contact the Zoox Homologation Team.
Settings
Step 1 - Access the settings menu
Step 3 - In this first screen just put the name of your Wireless network in the field "SSID" (And
if you are going to use VLAN, put its ID)
Step 4 - Go to the "Security" tab, leave Wireless authentication open, create a new AAA server
and configure a new Captive Portal:
Step 13 - To finish in the "Accounting" tab within the WLAN configuration, fill in as the image
below:
Em AAA Policy, selecione o servidor que você criou!
Step 14 - Click "OK" and then
Step 15 - Click on Firewall policy under security tab and create a new policy.
Step 16 - Under profiles tab, binds the new firewall policy to the target access point profile.
Click ok and Commit and save.
Adding Routers
Go to Menu>Register>Hotspot>Router>Add
Setting Parameters:
1- Give a Router name
2- Select the vendor of your router
3- Add the Mac Address of your Router
For Router Type observe that:
Extreme wings = Symbol
Extreme IQ ou Extreme Cloud = Aerohive
Adding Hotspot
Go to Menu>Register>Hotspot>Hotspot>Add
Setting Parameters:
1- The Name field should be the same name you gave to your WIFI network (SSID)
2- Router; Select the router that you created on previous steps
3- Select the plan that you created on previous steps
4- Save Setings
There it is! Your Extreme is set up and ready to use with ZOOXWIFI!
If you have any questions or difficulties, please contact our support via email
suporte@zooxsmart.com.