Professional Documents
Culture Documents
DESCRIPTION ADVANTAGES
MasterSeal 550 is a two-component acrylic • Waterproof
modified cementitious coating that requires only on • Excellent adhesion. Bonds to porous and non-
site mixing to form the ideal product to waterproof porous surfaces
and resurface concrete, masonry, and most other • Flexible
construction materials. • Non-toxic suitable for contact with potable
Simply applied by stiff brush, roller, or trowel, it water
forms a waterproof, flexible coating. • Suitable for light pedestrian traffic
MasterSeal 550 provides an effective barrier to • Breathable - whilst repelling water, allows
waterborne salts and atmospheric gases. substrate to breathe
Fluid applied, MasterSeal 550 provides a hard • High resistance to chloride ion diffusion
wearing, seamless, waterproof membrane for • Unlike conventional coatings which require a
roofs and foundation protection. 7-28 day cure of concrete, MasterSeal 550 can
be applied to 24 hour-old concrete thereby
MasterSeal 550 is composed of specially selected giving immediate protection
cements, silica sand and reactive fillers supplied in
• White color has high solar reflectivity index
powder form together with a liquid component of
(SRI) to prevent heat island effect on roofs
blended acrylic copolymers and wetting agents.
PACKAGING AND COLORS
TYPICAL APPLICATIONS
MasterSeal 550 is available in 20 kg double pack.
• To reface and even out variations in concrete
surfaces.
MasterSeal 550 is available in three standard
• As a waterproof lining for water retaining colours: J-Light Grey, K-White and H-Dark Grey.
structures.
• For coating seawater channels.
STANDARDS
• Sealing and coating tie bar holes to ensure
watertightness. BS 6920: Part 1 2000 - Suitable for use in contact
• For waterproofing and protection against with potable water.
brackish water.
• To provide foundation protection. TYPICAL PROPERTIES*
• As a waterproof coating for roofs.
• As a backing to marble and granite to prevent Density 1826 kg/m³
Toxicity BS 6920 Non-toxic - Suitable
water ingress and thus alleviate surface
for use in contact
staining. with potable water
• To provide protection to concrete surfaces from Chloride ion diffusivity Not measurable after
carbonation and chloride attack. 24 months of testing
• For use on pedestrian walkways in marine Depth of water penetration under Nil
pressure BS EN 12390 Part 8: 2009
areas. Liquid water permeability <0.1 kg (m²xh 0.5)
• For waterproofing of wet areas under tiling. BS EN 1062-3: 2008
• As a waterproof and protection coating on top Carbon dioxide permeability BS EN >50 m
of spray polyurethane foam roof insulation. 1062-6: 2002 Method A
Equivalent air layer thickness (SD)
MasterSeal® 550
APPLICATION GUIDELINES MIXING
Surface preparation: MasterSeal 550 is supplied in premeasured units
As with all coating systems, surface preparation is and should be mixed on site utilising clean
of prime importance. Remove all grease, oil, dust, containers. Slowly add the powder to the liquid and
residual curing compound, mould release agent or mix, using a slow speed drill fitted with a suitable
other contaminant that could impair adhesion. paddle. MIX AND USE. Do not mix more material
Laitance should preferably be removed by light than can be used in one hour.
sweep blasting or hydro-jetting. Mechanical wire
brushing may be appropriate for small areas. NOTE: Although MasterSeal 550 is supplied in
Spalled concrete should be cut back to sound premeasured packs, part packs can be used by
concrete and made good with a suitable mixing 2 volumes of powder to 1 volume of liquid.
cementitious repair mortar such as Mix thoroughly and keep mixed during application.
MasterEmaco S 488. Conventional concrete DO NOT RE-TEMPER WITH WATER.
curing compounds should be removed before
application. The exception to this is when PLACING / APPLICATION
MasterKure 181 has been used. Roofing tiles Do not apply to dry concrete
should be firmly bedded and grouted before Saturate concrete surfaces with clean water whilst
application. still visibly damp, but free of standing water, apply,
using a short, stiff bristle brush or roller. Trowel
Chloride Ion diffusivity application can be undertaken as necessary. For
MasterSeal 550 provides an effective barrier to heavy 6-10 mm depressions, honeycombs etc. use
waterborne salts such as chlorides and sulphates. less gauging liquid and mix to the desired
*lndependent assessment has shown that even consistency. Where more than one coat is found
after 12 months constant immersion the chloride necessary to achieve the desired thickness, apply
ion diffusion co-efficient could not be measured for the second or subsequent coats after the previous
MasterSeal 550. coat has dried.
BASF_CC-UAE/Sl_550_12_94/v6/07_17/v7/04_18/v8/12_18/v9/09_19
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.