Professional Documents
Culture Documents
Tds Consol Grout 800 MF
Tds Consol Grout 800 MF
Version: 006
Update: July, 2022
DESCRIPTION Colour
CONSOL GROUT 800 MF (Micro Fibre) is a non-shrink Grey
cementitious grout with an additional special blend of fibre. It
is ready to use which has the characteristics of not shrinking Packaging
with a working time that is suitable for local temperature. 25kg
Complies to ASTM C-1107.
Mixing Density
~2.3 kg/L (3.25 L water per 25 kg bag)
RECOMMENDED FOR
CONSOL GROUT 800 MF (Micro Fibre) is easy to apply for: Mixing Ratio
• Filling cavities, gaps and voids in concrete 3.25 L per 25 kg bag
• Concrete repair using the grouting method (water per powder = 13% by weight)
• To grout anchors in concrete
º
• Pre-cast concrete Pot Life 30 C
• Bearing plates 60 minutes
• Base plates/machine foundation
• Dry pack applications Shelf Life
9 months when unopened
• Supporting bridge bearing pads
• For structural repair, specially in marine environmental
Storage
such as honeycombing
Dry, cool, shaded place
• Precast wall panel and structural members
• Use for structural grouting of column and machine base
Product temperature
plates ˂ 30°C
BENEFITS
Ambient air temperature
CONSOL GROUT 800 MF (Micro Fibre) provides the
10°C - 35°C
following properties of benefit such as:
• Good flow characteristics
Substrate temperature
• Easy to use, ready to mix powder 10°C - 35°C
• Easy to mix, only add water
• High compressive strength TECHNICAL DATA
• Resistant to shrinkage Chemical Base
• Resistant to impact and vibration Cement, selected fillers and aggregates, special
• Non toxic fibres and additives
• Non corrosive
PRODUCT DATA
Form
Powder
TECHNICAL DATA SHEET
Version: 006
Update: July, 2022
Application
Pour CONSOL GROUT 800 MF (Micro Fibre) after mixing into
the forms from one side to avoid air entrapment. Maintain the
grout at all times to ensure a continuous flow.
For additional technical information of CONSOL GROUT 800
MF (Micro Fibre) contact the technical services.
CURING
Wet cure for a minimum 3 days with wet hessian, plastic sheet
or apply a curing compound.