Use pattern: Page2. Cut out A1 by cutting along the lines. Cut along the line marked . Parts name Parts No.
Triangular glue tab A1 Head
Glue tab
Scissors line
Make a mountain fold and valley fold on A1.
Trace along the mountain fold line and valley fold line with a stencil pen, scoring it to make it easier to fold.
The parts will be easier to assemble if curled.
Using the photo as a guide, move your fingers in the direction of the arrow, adjusting the pressure to curl the paper.
Tools Notation Key
Scissors Scissors line
Paste, or woodwork glue Mountain fold Stencil pen, or bodkin Valley fold Ruler Glue spot Parts No.
The Assembly instructions are divided into three blocks: A (head),
B (front legs, body), and C (waist, hind legs, tail). Follow the Add a slight curl to A1 when attaching it. instructions for each block to assemble your munchkin. Attach the triangular glue tabs so that the front side becomes convex. Using the photo as a guide, attach in the direction of the arrow. marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance. <Caution> Keep scissors and glue away from small children. Be careful not to cut your fingers when using scissors. Munchkin : Assembly Instructions Page
Attach A1 and A2. Attach the neck to head.
Attach A3, A4 and A5, and attach A6 to them.
Glue A9 and A10 together, and curve them into ear-like shapes. Assemble A11 and A12 in the same way.
Apply glue to the area
marked by the blue line.
Attach the mouth to head.
Attach ears to the head, and the head is complete.
Assemble A7 and A8, and attach them together.
Munchkin : Assembly Instructions Page
Assemble the front legs and body Attach the front legs to shoulder.
Use pattern: Page3 / Page4.
Attach B1, B2 and B3, and B4.
Attach the shoulder to head.
Assemble parts B5 to B8, and attach them together.
Do the same for parts B9 to B12. Attach B13 and B14, and attach them to the body, and the body is complete. Munchkin : Assembly Instructions Page
Assemble the waist, hind legs and tail Attach the hind legs to body.
Use pattern: Page5 / Page6. Put glue on the edges
of the back of the parts. Attach C1 to the body. Then, attach C2 and C3 to it.
Assemble parts C12 to C16, and attach them together in order.
Attach that to the body, and your munchkin cat is complete. Add curves to this part.
Assemble parts C4 to C7, and attach them together.
Do the same for parts C8 to C11. Attach together in part number order.