You are on page 1of 8
Le oreTesT LABORATORY TEST REPORT ON COMPRESSIVE STRENGTH LABORATORY TEST REPORT ON COMPRESSIVE STRENGTH X-Calibur International FZC Report No: WLRP18-1609/1 PO.Box.120636 ‘Sample No: WSP18-1609 Sharjah, UAE. Date of Report: 23/07/2018 Introduction: Further to the request received from Mis. X-Calibur International FZC dated 12" of July 2018, the ‘sample of X-Tite EpoxyGrout 150 was tested for Physical parameters. ‘Sample Description X-Tite EpoxyGrout 160 Batch No : Base: A1801309X Hardener: 41801310X Filler: A1803339X Sample Received Date 2 12/07/2018 Casting Date Date of Test Tested by Compressive Strength ‘Test Method: ASTM C579 ‘Temperature: 23°C Relative Humidity: 5085 % ‘Age of specimen at test: 7 Days Curing Conditions: Air Curing Sample Mass (9) | Breath Width Max Load ‘Compressive Number ee (mm) (mm) (N) ‘Strength (Nimm' 263.0 50.0 50.0 235.67 94.27 257.5 50.0 50.0 50.0 232.59 93.03 WsP18-1609 257.0 50.0 50.0 50.0 226.32 90.53 Average 92.61 lair aboratay Stipe st esute Flats onto the samples tested ‘This report shallot bo roprocuced except in ful, wi Bantall Leal UM as # WYTYWAS Go # HAY ETYOEVIAT GSU © FAV) ETTOEVW gu TEL: +9714 3204717 « FAX: +971 4 3204718 » P.O.BOX: 123279 » DUBAI « UNITED ARAB EMIRATES. E-mail info.cxb@wimpeylab.com Website: www.wimpaylab.com beg Oye i Le\ LB OTG-TEST LABORATORY TEST REPORT ON ELASTIC MODULUS X-Calibur Emirates Report No. WLRP18-1051 P.O Box : 1200636 Sample No. WSP18-1051 Dubai , UAE Report Date: 09/05/2018 Introduction: Further to the request received from X-Calibur Emirates dated 3° of May 2018 to test the ‘samples of X-Tite Epoxy Grout-150, for Elastic Modulus, Sample Description 1 XTite Epoxy Grout-150 Batch Number B-A1805354X, H-A1805355X, F- A1805353X Client X-Calibur Emirates Sample Received Date 03/05/2018 Casting Date 01/05/2018 Date of Test £ 08/05/2018 Tested by :PK Elastic Modulus Test Method: ASTM C580 Test Temperature: 24°C Relative Humidity: 505% WSP18-1051 40.00 40.00 120 12698 1580 Average Elastic Modulus 1603 Te 4 Foaf6 only tothe samples tested. This report sfal not be reproduced except in ful, without Banball dae sall OIL # ged 8 VT TVA ge © GAVE NT EVIA: GSU © FAV) ETT EVV: oll TEL: +9714 3204717 » FAX: +071 48204718 P.0.80X: 123279 « DUBAI « UNITED ARAB EMIRATES. E-mail info.dxb@wimpeyiab.com Website: www.wimpeylab,com SEALIBUR algo yaaa & Al Futtaim Bodycote se Materials Testing REPORT OF TESTS Description | X-Tite EpoxyGrout 150 Tested fi ‘X-Calibur Construction Systems Inc., 11471 Interchange Circle South ssted Tor Miramar, Florida 33025, USA Lab Ref. No. | WRO7-25530 (Page | of 1) RequestNo.__WQ07-08101 Date Received | 10.05.2007 Date Reported 24.05.2007 Client's Reference # Requisition dated 10.05.2007 Sample Reference X-Tite EpoxyGrout 150 Date of cast 14.05.2007 AFBT Sample No. WOT-008101/1 Pre Conditioning & Curing (@) Conditioned at 45°C for 24 hours Gi) Mixed at room temperature Specimens cured at 45°C. 1.0 Introduction Further to the test work instructions received from M/s X-Calibur Construction Systems, Inc, dated 30.04.2007, the sample of X-Tite EpoxyGrout 150 provided has been tested for the following by Al Futtaim Bodycote Testing LLC; 2.0 Compressive Strength ‘Test Method: ASTM C 109: 99 rary ‘Compressive Strength Test Ref. No| Test age an cs arene 1 2587 103.5 2 1 days 264.1 105.6 105.0 3 264.4 105.8 4 269.2 107.7 3 3 days 274.0 109.6 108.4 6 270.1 108.0 7 280.4 1122 8 7 days 281.1 1124 112.9 9 285.3 14.1 aa re > Al-futtaim ‘uttaim Bodycote Testing (LLC) gpa Sasa Jf TESTING (LL. Tested ty: Pe, Date Tested: 14,05.200721.05.2007 peal bidad asta Sampled by the leat, erica of pling was not gifen._ P.O. Box: 94924'- DUBAL -ULAE. Ta apr sual ooh Fe edu Apple wa Seago belt Sagebleras cerned) eis okie apes Thelseaulsnaoan amststsed {Al Fttaim Bodyoote Testing LLC - PO, Box 34924 - Dub United Arab Emirates “Tel: +971 (0)4 885 1001 - Fax: +971 (0}4 685 4004 - E-mal: duballab@bodyeote.com oil 4 algo ua 8 4 Al-futtaim Bodycote Materials Testing APPROVED REPORT OF TESTS: Description | X-Tite EpoxyGrout 150 X-Calibur Construction Systems Inc., 11471 Interchange Circle South Tested for | Miramar, Florida 33025, USA Lab Ref. No. WRO7-25531 (Page | of 1) Request No. WQ07-08101 Date Received | 10.05.2007 Date Reported — 23.05.2007 Client's Reference Requisition dated 10.05.2007 Sample Reference X-Tite EpoxyGrout 150 Date of cast 14.05.2007 AFBT Sample No. W07-008101/1 Pre Conditioning & Curing : (i) Conditioned at 45°C for 24 hours Gi) Mixed at room temperature (ii) Specimens cured at 45°C. 1.0 Introduction Further to the test work instructions received from M/s X-Calibur Construction Systems Inc, dated 30.04.2007, the sample of X-Tite EpoxyGrout 150 provided has been tested for the following by Al Futtaim Bodycote Testing LLC; 2.0 Flexural Strength ‘Test Method: ASTM C 580: 96 ‘AFBT | Test [Test age] Length | Width | Thickness [Span] Load | Flexural Sample No. | Ref. (mm) | (mm) | (mm) |(mm)| (kN) | Strength W07-008101 (Nim?) I 1 320 | 25 25 | 230 | 1.670 | 36.9 2 2 | Tdays| 320 | 25 25 | 230 | 1.366 | 30.2 3 3 320 | 25 2 | 230] 1472 | 325 Average 332 ena We [4 Alfiticim EBodycote Tested by : LV, Date Tested ! 14.05.2007-21 05.2007 ah mj TESTING WLC) ‘Sampled by the client, certificate of sampling was not given. sid Gop Sle THE porch en be epOUANT RAL, Appel ofc wsg EN Ae ‘Samples will be retained for a period of one month only, unless otherwise i ess fe The test resus ela enly tothe samples tested A Futtaim Bodycote Testing LLC : P.O. Box 34924 - Dubai - United Arab Emirates Tel +971 (O}4 885 1001 » Fax: +971 (0} 885 4004 - E-mail: dubai lab@bodycote.com ys WIMPEY LABORATORIES y—+09 “1-0 LABORATORY REPORT X-Calibur International Report No: WLPR15-7703Rev.4, P.O Box 120636 Sample No: WSP15-8127 Sharjah, UAE, Date of Report: 27/05/2015 Introduction: Further to the request received from X-Calibur International dated 25" May 2015, a sample of X-Tite Epoxy Grout 150 was tested for Pot Life. ‘Sample description X-Tite Epoxy Grout 150 ‘Sample received date +: 25/05/2015 Date of test +: 26105/2015 Tested by 2 AN ‘STM C 881 /C 881M—10 Test Temperature: 40°C Test Result Pot Life 65 minutes Remarks: None for and on behalf of Wimpey Laboratories without the writen approval of the laboratory Ende TEL: +9714 3204717 + FAX: 497143204718 * POBOX: 123279 + DUBAI + UNITED ARAB EMIRATES Sama yall LM 6 Galaged © NVOSAT i cange FV Y OO-TTAY : Gus © FAV) Y OCTTTE fcypaabs es) TEL: +971 25903324 + FAX: 4971 25503387 + P.O.80X: 115086 * ABU DHABI + UNITED ARAB EMIRATES. E-mail info.dubai@wimpeylab.com Website: w.wimpeylab com ial Fanta aN GbLY «ga 6 WWArgnge © FAV EFT EVIAT OSE 6 FAVIETTEVIVe Opi athidl agsusal 3 @ Al-futtaim Bodycote cae Testing REPORT OF TESTS Description _ | Pull of Test on X-Tite Epoxy Grout 150 Bonded to Steel Plate a X-Calibur Construction Systems Inc., 11471 Interchange Circle South “coer ‘Miramar, Florida 33025, USA Lab Ref. No, | WRO7-21032 B (Page 1 of 1) Request No. WQ07-07335 Date Received | 30.04.2007 Date Reported 02.05.2007 Client's reference Requisition dated 30.04.2007 Sample preparation Prepared specimen submitted by the client. AFBMTS sample no. W06-007335 1.0 Introduction Further to the test work instructions received from M/s X-Calibur Construction Systems Inc, dated 30.04.2007, the sample of X-Tite Epoxy Grout 150 bonded to Steel Plate provided has been tested for the following by Al Futtaim Bodycote ‘Testing LLC; 2.0 Pull Off Test Test Method : The tests were carried out in general accordance with BS 1881 Part 207 using a 'LOK-TEST pull out instrument, Test 3 4 ‘Sample reference Small Test position Vertical Vertical [Cylindrical block (oly) ret c D [Area of eylindrical pele 1286 1256 Maximum load applied (kN) I un Pull off bond) strength ia 8.75 8.75 Description of | Type of _ [Failure occurred atthe interface Between the system and failure |substate eh \ For and on behai oP ArPuttaTar Bodycote Testing (L.L.C) | Tested by: PK/LV, Date tested: 01.05.2007 Sampled by the client, certificate of sampling was not given “This report sal only Be reproduced mull Approval o he eng ieborairy required for paral eproucton, Samples wil be retained fora period of one month only, unless otherwise requested The test resus eat only othe samples tse ‘Al Futtaim Bodyoote Testing LLC - PO. Box 34924 »Dubal Unitad Arab Emirates ‘Tel +971 (0)4 885 1001 - Fax: +971 (O}4 885 4004 - E-mail: dubai tab@bodyeote.com & WIMPEY LABORATORIES y-+0-29 —f>—+-t-s~0 LABORATORY REPORT X-Calibur International F2C Report No: WLPR15-8670 Rev.1 P.0 Box 120636 ‘Sample No: WSP15-8866 Sharjah, ULA.E, Date of Report: 10/06/2015 Introduction: Further to the request received from M/s. X-Calibur International dated 07" June 2015, a sample of X-Tite EpoxyGrout 150 was tested for pull out test with 26mm diameter bar Sample description : X-Tite EpoxyGrout 150 Date of test. ‘07/06/2018 Tested by EVD Pull Out Test Method: BS 1881 Part 207 Embedded length of the reinforcement bar: 150mm ~ DESCRIPTION RESULTS "Test Number 7 2 3 Test location’ Not Applicable Test Position Vertical Diameter of SteeKmm) By 28 28 Max, Load applied (bar) 00 400 400 Pullout force (KN) 139.23 198.23, 739.23, Teron Fallure not observed, load suiinod anc machine reachnd ka Remarks: The above test conducted by Wimpey at the X-Calibur Emirates research laboratory by using their calibrated equipment. Signed for and on behalf of Wimpey Laboratories Bundall yall UST 8 as 8 ITIVE Ge 8 FAV ETY- EVA GSU © GAVE TYOEVIW: Gohibh = TEL: 4971 4 9204717 « FAK: +07143204718 + P.O.BOX: 123279 + DUBAI « UNITED ARAB EMIRATES. ial Easel OLD © gilt ol 6 NO-AT: Ge HAV OO TAY: GASL # HAVY TOS TTTE: hat TEL: +971 2.5503324 + FAX: +871 25503367 * P.O.BOX: 115086 * ABU DHABI * UNITED ARAB EMIRATES E-mail info.dubai@wimpeylab.com Website: wuw.wimpeyiab.com alge Ilya Materials Testing APPROVED REPORT OF TESTS Description | X-Tite EpoxyGrout 150 X-Calibur Construetion Systems Ine,, 11471 Interchange Cirele South Tested for | Miramar, Florida 33025, USA Lab Ref. No. | WRO7-25532 (Page | of !) Request No. WQ07-08101 Date Received | 10.05.2007 Date Reported 23.05.2007 Client's Reference Requisition dated 10.05.2007 Sample Reference X-Tite EpoxyGrout 150 Date of east 14.05.2007 AFBT Sample No. WO07-008101/1 Pre Conditioning & Curing: (i) Conditioned at 45°C for 24 hours (ii) Mixed at room temperature (ii) Specimens cured at 45°C. 1.0 Introduetion Further to the test work instructions received from M/s X-Calibur Construction Systems Inc, dated 30.04.2007, the sample of X-Tite EpoxyGrout 150 provided has been tested for the following by Al Futtaim Bodycote Testing LLC; sian ‘Test Method: ASTM C 307:94 sampans, | tease | wt | Tustams [rontsua 1 25 15.3 Average 15.9 ® Al-futtaim Bodycote | gece bi HI TESTING (L.L.c) (pl) aia aybasly Box: 34924 - DUBAI -U.A.E. Wo ‘Tested by : LV, Date Tested : 14.05.2007 - 21.05.2007 ‘Sampled by the client, certificate of sampling was not given, This report shall only be reproduced inl, Approval of We esting borat 1 TeuTeN Tor eT SPRAIN | ‘Samples wil be retained fora period of one mom only, unless oer eguesie, The st result relate only to the simples tse, Al Futtaim Bodycote Testing LLC P.O. Box 34924 Dubal United Arab Emirates Tek +971 (0)4 885 1001 - Fax: +971 (OM 885 4004 - E-mail dubai lab@bodycote.com

You might also like