Professional Documents
Culture Documents
Brochure
Brochure
The Series 2700 family of control valves offers the flexibility to select the most Contents
effective design and features for a specific application. The Series 2700 family includes
2 Configurations
three valve/actuator configurations: 2700A Standard, 2700E Extended Bonnet* and 2720
3 Valve Specifications
Close-Coupled.*
5 Valve Trim
Each configuration includes a single-ported valve body with either balanced, unbalanced,
full port or restricted port trims to suit a variety of flow requirements. Both plug-control 9 Actuators
and cage-control trims are available in metal-to-metal or metal-to-composition seating 11 How to Order
material for Class VI shut-off. All trims are interchangeable within the valve body. 12 Model Code
*Not available in all sizes. Please consult factory.
Features
2700A Control Valve ᔢ Molded diaphragm design gives precise
ᔢ Balanced trims 1 inch and larger positioning of the valve plug throughout
ᔢ Unbalanced trims 1 inch and smaller valve travel
ᔢ Plug-control trims (modified percentage, ᔢ Computer-designed, ductile iron yoke adds
quick opening) stability and strength to resist fatigue from
ᔢ Cage-control trims (linear, equal percentage, vibration and high-frequency service or over-
cavitation control, noise reduction) pressurization of the diaphragm housing
ᔢ 17-4PH SST standard trim, other ᔢ Steel diaphragm housing helps prevent exces-
materials available sive deflection in over-pressure conditions
ᔢ Available with direct- or reverse-acting, yoke- ᔢ Standard 3 to 15 psig and 6 to 30 psig spring
mounted pneumatic diaphragm actuators ranges
ᔢ Trim options include erosion-resistant, soft-seat
ring, noise abatement and cavitation control Series 2720 Control Valve with
ᔢ Cage-control trim features dwell protected Close-Coupled Actuator
seat area ᔢ Includes all 2700A valve features
ᔢ TFE V-ring packing (non-adjustable, ᔢ Space saving, economical design
spring-loaded) ᔢ Reverse, close-coupled
ᔢ Bolted closure bonnet (yokeless) actuator
Series 2700E Extended Bonnet Control Valve ᔢ Non-adjustable, spring-loaded packing
ᔢ Includes all 2700A features ᔢ Interchangeable trim variations
ᔢ High and low temperature services ᔢ Visual travel indicator on the actuator housing
ᔢ Special trim and seal materials ᔢ Body sizes from 1 inch (25 mm) through 4 inch
(100 mm)
Direct- or Reverse-Acting Actuators
(2700A, 2700E)
ᔢ Available for a wide range of applications
ᔢ Broad selection of accessories, including side-
or top-mounted manual handwheel overrides,
travel stops and spring ranges for all applications
Engineered
Performance
ISO 9001
Cert. #30080
2 Configurations
SERIES 2700E
EXTENDED BONNET
BODY ASSEMBLY FOR
YOKE-MOUNTED
ACTUATOR
SERIES 2700A As shown:
VALVE/YOKE-MOUNTED Plug-control trim,
ACTUATOR ASSEMBLY graphite packing
As shown: Flow
Cage-control trim,
TFE V-ring spring-
loaded packing, Series 2720
reverse-acting
(fail-closed) Applications: provides features of the Series 2700A
actuator valve, but with a close-coupled, space-saving, eco-
nomical design. Standard operating temperature
up to 200°F (93°C).
SERIES 2720 BODY
Flow ASSEMBLY FOR
CLOSE-COUPLED
ACTUATOR
As shown:
Cage-control trim,
spring-loaded TFE
Flow
V-ring packing
Trim
Plug Cage Seat Limits*
Material Material Material F C
316 SST(2) 316 SST 316 SST(2) –300° to 400° –184° to 204°
316 SST/Alloy 6 316 SST (4) 316 SST/Alloy 6 –300° to 800° –184° to 427°
17-4PH SST 17-4PH SST 17-4PH SST –50° to 800° – 46° to 427°
17-4PH SST/Carbide(5) 17-4PH SST 316 SST/Carbide –50° to 600° – 46° to 316°
Duplex SST Duplex SST (4) Duplex SST –20° to 750° –29° to 399°
(2)
Shutoff pressure drop of 316 SST seat is 750 psi (51 Bar) maximum.
(4)
Chrome plate for service above 400°F (204°C).
(5)
Plug control trims only
*All temperature limits are determined by the limits of the least component
Valve Component
BoDy HEigHt
“F”/2
“F”
NOTES
Seat Leakage (ANSI/FCI 70-2). Norriseal trims provide Caution: Pressure Drop Ratings. The rated pressure
Class II, IV or V tightness with metal seats and class VI drop may be less than the body’s rated working
tightness with composition seats. pressure. The rated shutoff pressure drop is dependent
on the actuator’s size, spring range, air pressure and
Flow Coefficients. The following page displays flow seat leakage class. For a chart containing actual
coefficients (Cv) for commonly used trim sizes and pressure drops, please refer to the Norriseal Valve
characteristics. Refer to Norriseal Valve Sizing Program Sizing Manual or our actuator sizing spread sheet avail-
for balanced reduced-port, noise abatement and able online, or contact your Norriseal representative.
cavitation control Cv data.
Flow CoEFFiCiEntS (CV) For BAlAnCED CAgE-Control triMS (linEAr & EquAl pErCEntAgE)
Body Size Trim Size Charac- Valve Opening — Percent Total Travel
Inches (mm) Inches (mm) teristic 10 20 30 40 50 60 70 80 90 100
Linear .355 1.01 2.48 5.46 8.43 11.3 14.3 16.9 18.6 19.6
1.0 (25) 1.0 (25)
E.P. .308 .565 1.21 2.63 4.83 8.16 12.4 15.5 17.8 18.9
Linear .906 3.26 7.35 13.1 20.2 27.7 34.5 39.8 43.5 45.5
1.5 (40) 1.5 (40)
E.P. .400 .813 2.36 4.86 8.49 15.1 22.7 30.3 35.5 39.2
Linear 1.51 4.87 11.0 20.3 30.9 41.5 50.2 57.0 61.4 64.8
2.0 (50) 2.0 (50)
E.P. .643 2.20 4.82 9.29 15.6 25.9 39.5 53.0 58.5 62.0
Linear 3.23 8.30 19.6 37.6 55.8 73.7 88.9 101 110 117
3.0 (80) 3.0 (80)
E.P. .906 3.31 7.72 15.4 27.7 46.8 70.1 93.7 108 116
Linear 8.57 21.2 42.7 68.5 94.0 120 145 168 184 195
4.0 (100) 4.0 (100)
E.P. 2.83 9.09 19.5 33.9 52.0 79.8 119 159 185 195
Linear 19.6 55.8 104 152 200 248 296 339 369 391
6.0 (150) 6.0 (150)
E.P. 6.84 19.6 40.1 69.6 107 163 244 325 360 378
Linear 55.3 125 224 324 422 521 618 705 752 790
8.0 (200) 8.0 (200)
E.P. 18.1 44.1 86.9 143 221 346 494 642 728 756
Linear 59.6 122.3 220.5 361 585 835 995 1023 1030 1054
10.0 (254) 10.0 (254)
E.P. 35.7 74.6 137.0 233 398 627 829 948 1000 1014
Linear 92.7 178.3 303.2 497 810 1159 13 41 1365 1362 1389
12.0 (305) 12.0 (305)
E.P. 55.5 108.7 188.3 320 551 871 1118 1264 1323 1336
8 Valve trim (CONTINUED)
Flow CoEFFiCiEntS (CV) For BAlAnCED plug-Control triMS (quiCk opEning, MoDiFiED pErCEntAgE)
Body Size Trim Size Charac- Valve Opening — Percent Total Travel
Inches (mm) Inches (mm) teristic 10 20 30 40 50 60 70 80 90 100
Q.O. 8.83 14.0 17.4 19.2 20.2 20.9 21.2 21.5 21.7 21.9
1.0 (25) 1.0 (25)
M.P. 1.17 2.29 3.82 6.65 10.9 15.2 17.7 19.3 20.2 20.5
Q.O. 13.2 26.4 37.2 44.3 49.1 52.4 54.2 54.8 55.3 55.9
1.5 (40) 1.5 (40)
M.P. 3.13 6.06 9.68 17.7 28.8 40.0 47.2 51.6 54.0 54.8
Q.O. 19.6 38.7 55.2 62.7 65.6 67.5 68.8 70.0 71.3 72.8
2.0 (50) 2.0 (50)
M.P. 5.01 11.0 20.3 33.8 48.9 61.4 67.2 69.5 70.8 71.6
Q.O. 27.5 54.5 81.8 102 115 122 126 127 129 130
3.0 (80) 3.0 (80)
M.P. 6.15 14.9 27.7 52.5 80.3 104 118 124 128 129
Q.O. 30.4 64.5 103 142 175 195 204 210 212 213
4.0 (100) 4.0 (100)
M.P. 8.42 21.6 38.3 71.5 114 148 177 196 207 211
Q.O. 55.2 117 189 271 333 374 406 427 440 444
6.0 (150) 6.0 (150)
M.P. 19.8 40.1 76.7 128 192 252 312 352 378 400
Q.O. 90.3 217 354 505 631 725 797 841 872 885
8.0 (200) 8.0 (200)
M.P. 36.3 75.2 138 242 375 522 641 723 780 805
Flow CoEFFiCiEntS (CV) For unBAlAnCED plug-Control triMS (MoDiFiED pErCEntAgE AnD EquAl pErCEntAgE)
Body Size Trim Size Charac- Valve Opening — Percent Total Travel
Inches (mm) Inches (mm) teristic 10 20 30 40 50 60 70 80 90 100
0.19 (5) E.P. .002 .007 .016 .027 .040 .057 .101 .191 .320 .561
M.P. .284 .506 .657 .767 .875 .989 1.10 1.20 1.32 1.43
0.25 (6)
1.0 (25) E.P. .043 .061 .095 .146 .229 .338 .477 .717 1.19 1.42
1.5 (40) M.P. .311 .621 .942 1.28 1.64 2.07 2.51 2.93 3.35 3.70
2.0 (50) 0.38 (10)
E.P. .092 .140 .220 .341 .495 .717 1.14 2.06 2.91 3.13
M.P. .557 1.11 1.68 2.26 2.92 3.62 4.30 4.98 5.43 5.60
0.50 (13)
E.P. .098 .162 .265 .442 .740 1.52 2.58 3.64 4.68 5.20
M.P. .752 1.57 2.43 3.42 4.58 6.08 7.93 9.71 10.6 11.0
0.75 (19)
1.0 (25) E.P. .185 .334 .481 .835 2.17 3.98 5.79 7.61 8.82 9.25
1.00 (25) M.P. .983 2.01 3.40 6.12 8.90 11.7 13.5 14.4 15.1 15.4
M.P. .882 1.76 2.76 3.82 5.05 6.57 8.49 10.8 12.2 12.9
0.75 (19)
1.5 (40) E.P. .185 .334 .481 .835 2.17 3.98 6.20 8.46 10.1 10.9
1.00 (25) M.P. .964 1.92 3.08 4.67 6.96 10.0 13.0 14.7 15.5 16.3
M.P. .882 1.76 2.76 3.82 5.53 7.78 10.2 12.6 15.0 16.2
0.75 (19)
2.0 (50) E.P. .185 .334 .481 .835 2.17 3.98 6.20 8.46 10.1 10.9
1.00 (25) M.P. 1.01 2.02 3.14 5.07 9.68 11.9 14.9 17.2 19.3 20.9
Direct-Acting reverse-Acting
This is a fail-open, push-down-to-close style This is a fail-closed, push-up-to-open style actuator.
actuator. Applying pneumatic pressure to the Applying pneumatic pressure to the lower
upper diaphragm housing forces the valve plug diaphragm housing raises the valve plug upward
downward to engage the valve seat. Reducing against the opposing spring force, which opens
the pressure on the diaphragm enables the the valve. Reducing pneumatic pressure to the
opposing spring force to raise the valve plug diaphragm causes the spring to move the valve
upward, opening the valve. plug downward, closing the valve.
Direct-Acting Reverse-Acting
(Fail-Open) (Fail-Closed)
10 Actuators (CONTINUED)
“C”
Actuator with
Optional “D”
Side-Mounted
Handwheel
“G”
DIA.
“F”
Actuator with
Handwheels Optional
Top-Mounted
Norriseal offers a range of handwheels for manual assistance in
regulating stem travel or positioning the control valve plug to
Handwheel
override the actuator in case of pneumatic pressure failure.
Top-Mounted. Normally used as a manual or adjustable travel stop.
Side-Mounted. Limits travel by moving the actuator/valve stem in
the direction opposite the actuator spring to any point within the
valve travel. Automatic pneumatic operation throughout valve travel
is possible with the handwheel in neutral position. A spring-loaded
ball detent is furnished to stabilize the handwheel setting in
vibration service.
“B”
Travel stops are also available. DIA.
Actuators (CONTINUED) 11
reverse-Acting
“A” DIA.
“B”
How to order
If known, specify: 2. Controlled fluid (include chemical 8. Maximum permissible noise level
1. Body size, series/style and analysis when available) (if critical)
material (Example: 4-inch body in 3. Specific gravity of 9. Shutoff classification required
Series 2700A = 4-2700A) controlled fluid 10. Line size and schedule
2. Trim size and material 4. Fluid temperature 11. Optional equipment
3. Throttling or On/Off service 5. Range of flowing inlet pressure Series definition:
4. Actuator size, action and 6. Pressure drops 2700A — Standard bonnet with
spring range a. Range of pressure drops open-yoke actuator
5. Optional equipment/accessories b. Maximum at shutoff
required 2700E — Extended bonnet with
7. Flow rates open-yoke actuator
If not known, specify: a. Minimum controlled flow 2720 — Valve with close-coupled
1. Type of application b. Normal flow actuator
a. Throttling or On/Off c. Maximum flow
b. Back pressure (relief) or
pressure reducing
12 Model Code (1)
Material Code
ASTM A216 Gr WCC (Std.) – ACtuAtor typE
ASTM A216 Gr WCC (NACE) N
ASTM A351 Gr CF8M (Std.) S Source/Range Code
ASTM A351 Gr CF8M (NACE) R Pneumatic, 3–15 psi NX
ASTM A352 Gr LCC (Std.) P Pneumatic, 3–27/6–30 psi WX
ASTM A352 Gr LCC (NACE) L Electric, 4–20 mAdc E2
Electric, on-off EO+
+Consult factory for valve sizes 10” and above
ACtuAtor ACtion
Mode Code
pACking
Direct (Fail-Open) B Material Load Type Code
Reverse (Fail-Closed) T Single TFE Spring-loaded –
Manual (Handwheel) M Single TFE Adjustable A
Graphite Adjustable G
Accessories
Positioners (electro-pneumatic, pneumatic, digital), airlock, limit
switches, solenoid valve, booster relay, filter regulators, I/P FugitiVE EMiSSion pACking
transducers, pressure controllers, temperature controllers, etc.
(1)
Material Load Type Code
Example is for the purpose of displaying Model Code structure and not
intended to identify all available materials and configurations. FES-II Non-adjustable K
*Application dependent; consult factory.
In Canada contact:
Engineered Performance
Tel: 713· 466·3552 Tel: (780) 434-8566
Fax: 713· 896·7386 Fax: (780) 434-4267
www.norriseal.com www.albertaoiltool.com
©2015 Dover Corporation/Norriseal and its affiliates. This manual, including all text and Due to the continuous improvement program at Norriseal, specifications and/or prices
images, is a copyrighted work of Dover Corporation/Norriseal and its affiliates. It may not are subject to change without notice or obligation.
be, in whole or in part, photocopied, scanned, or otherwise reproduced, revised, or pub-
licly displayed, without prior written permission from Norriseal. This manual is for use All trademarks contained herein are the property of their respective owners.
only with the new Norriseal valves and/or controllers listed in the manual. It may not be
distributed with, and is not for use with, any remanufactured products. 2700-0215T