Professional Documents
Culture Documents
Working Instruction Near Electric Power Transmission Lines
Working Instruction Near Electric Power Transmission Lines
NO:36
3- Protect the energy transmission lines in the building area by taking them under protection from external damage or
by suspending them.
4- Equip electrical lines with audible and / or illuminated warning signs so that everyone can see and recognise.
5- Work near free power lines only if the safety distance is not exceeded.
6- Take into consideration the shaking of the transmission line wires in the wind when determining the safety
distance.
7- Absolutely, the maximum approach distance accepted for conductors under voltage shall not be exceeded according
to Article 5 of TEIAS OCCUPATIONAL SAFETY REGULATION when working and / or in stationary
equipment.
If the voltage on the line is unknown, stay at least 4.5 meters away.
1000-15.000 Voltage, between 66 cm
15.001-36.000 Voltage, between 82 cm
59.000-72.500 Voltage, between 110 cm
140.000-170.000 Voltage, between 155 cm
200.000-250.000 Voltage, between 213 cm
340.000-420.000 Voltage, between 352 cm
Upper values are used for the high voltage equipment operated at voltages outside the ranges given above.
8- In the following works, supervise against the danger of approaching too much to electric power transmission lines
without permission.
Machinery (eg crane, loader, concrete pump, construction lifts, mechanical ladders), Large surface loads in lifting
equipment (eg iron railings, formwork elements, protruding parts), Mounting parts (eg steel roof back beam,
profiled sheets).
EK-GS-01-F036-01
WORKING INSTRUCTIONS NEAR ELECTRIC POWER
TRANSMISSION LINES Page 2/5
NO:36
10- Determine and implement these measures continuously together with the transmission line operator.
2
1
EK-GS-01-F036-01
WORKING INSTRUCTIONS NEAR ELECTRIC POWER
TRANSMISSION LINES Page 3/5
NO:36
11- If the Construction Machine Touches the Electric Power Transmission Line;
Calm down.
EK-GS-01-F036-01
WORKING INSTRUCTIONS NEAR ELECTRIC POWER
TRANSMISSION LINES Page 4/5
NO:36
13- If an electric arc occurs due to the construction machine contacting or approaching the electric power line, never
touch the machine while stepping on the ground. Don't let anyone touch the machine either.
OTHERWISE
AN ELECTRIC SHOCK
WILL OCCUR.
DANGER OF DEATH!
Never step on the ground and touch the
machine while the Construction Machine
contacting the Power Line. Otherwise, the
electric current will flow over you and flow
into the ground.
14- Train your employees and inform them about the dangers before starting the work.
EK-GS-01-F036-01
WORKING INSTRUCTIONS NEAR ELECTRIC POWER
TRANSMISSION LINES Page 5/5
NO:36
15- Be sure to follow the construction site rules, instructions, as well as work health and safety and environmental rules
described in the training.
EK-GS-01-F036-01