Professional Documents
Culture Documents
It has become harder and harder to assess the real value of a gemstone since the
emergence of synthetic diamonds, treated diamonds and nearly perfect imitates.
Infrared spectroscopy is an elegant way to classify diamonds and detect imitates. It
can provide valuable information on whether the stone is synthetic, natural or can be
treated using a high pressure high temperature technique (HPHT).
Bruker Optics offers the right tools for all typical applications. Their tools assist with the
identification and type determination of rough and polished diamonds as well as melee-
sized diamonds and mounted stones. Anything can be tested – from large rough diamonds
with dozens of carats to small fragments in the sub millimeter range.
Detection of imitates
Reliable type determination
Automated screening
Polished and rough diamonds
Diamonds mounted in jewelry
Consequently, analytical techniques which provide information about the genesis and
history of the stone are sought after. Although there is no single indicator that will give a
definite answer as to whether the stone is synthetic, natural, or has undergone certain
quality enhancement treatments, knowledge of the type of diamond allows extensive
conclusions to be drawn.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 1
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
hydrogen, boron or nitrogen are present inside the crystal lattice. The color of the diamond
can be affected by these foreign atoms and their arrangement as isolated atoms, larger
aggregates or pairs. The most important impurity is nitrogen and so its absence or
presence is used as the foundation of the type classification system.
In collaboration with HRD Antwerp, Bruker is offering the ALPHA II Diamond Analyzer (see
Figure 1) which enables users who are not trained in spectroscopy to measure and classify
a diamond in less than a minute.
High throughput screening accessory (HTS-XT) is the tool of choice for very large sample
batches like melee-sized stones because it enables automatic measurement and
classification of a large number of samples within a very short period of time. The FTIR
microscope LUMOS II can be used to measure and visually inspect the smallest diamonds
and complex arrangements on jewelry.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 2
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
It has the footprint of a laboratory book and only weighs 7 kg. The process of measurement
itself is very easy: the diamond is placed on the gold coated sample plate and moved inside
the DRIFT-unit (DRIFT = Diffuse Reflectance Infrared Fourier Transform).
The user interface changes its appearance dynamically during the measurement and
evaluation process. This provides the functionality to perform the next step. The ALPHA II
Diamond Analyzer provides an easy to use, automated and dedicated solution for diamond
detection and type analysis based on the FTIR method. It distinguishes diamonds from
imitations or other precious gemstones using the FTIR diffuse reflectance method.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 3
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Rough Diamonds
Rough diamonds require a different measurement approach than polished diamonds due to
their irregular shape. It is possible to measure rough diamonds using the ALPHA II
transmission module (see Figure 2) – from small diamonds to those up to a weight of a few
tens of carats.
Different measurement approaches can be combined for rough, mounted and polished
diamonds in one ALPHA II system because the measurement modules are easily
interchangeable within seconds.
Principle of IR Spectroscopy
IR spectroscopy uses thermal radiation, which is invisible to the human eye, and interacts
with matter by triggering lattice or molecular based vibrations. Each type of diamond has
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 4
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
The light is being absorbed and the diamond is more or less non-transparent in these
regions because the energy of the infrared light is converted into vibrational motion at these
specific wavelengths. With the appropriate measurement set-up, the IR-spectrometer
system can measure these absorptions.
The IR spectrum is the plot of the intensity of these absorptions in the infrared spectral
range against the wavelength. This contains enough information to classify a diamond.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 5
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
the measurement is ready to start. The software gives detailed user instructions (see figure
5).
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 6
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
It takes less than 30 seconds for measurement and evaluation using this infrared
spectrometer. The result is shown in combination with the spectrum of the diamond (see
figure 6).
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 7
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Figure 7 shows the automatically generated PDF-report. The report can be opened in a
single mouse click and contains all the required information including the identification
result (diamond or not a diamond), the type classification and the spectrum.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 8
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Mounted Diamonds
The ALPHA II can be used to measure mounted stones from jewelry, using the forward
looking reflection module (shown in Figure 8). The stone has to be placed in front of the
aperture hole for the analysis.
A built-in camera helps to correctly position the stone and so enables the user to selectively
measure even smaller stones in a narrow arrangement. A picture of a 0.25-carat diamond
that was taken with the internal camera of the ALPHA II reflection module is shown in
Figure 8.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 9
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Figure 8: ALPHA II with front reflection module. Inset: Picture of a diamond taken with the
integrated camera.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 10
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Figure 10 demonstrates the sample holder vice with a diamond ring, with the whole ring
shown in the picture inset. In Figure 11, the measurement of one of the stones together with
the according visual image is shown as an example.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 11
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Figure 10: Diamond ring fixed in the sample holder vice on the LUMOS II stage.
Figure 11: Diamond spectrum of one of the stones from the ring.
The spectrum clearly indicates a type IaA diamond. The spectrum shows additional
signatures from organic concentrations, for instance from skin fat, which is typical for
diamonds in jewelry. The stretching vibrations of C-H result in a double peal below 3000
cm-1, and this is typical for organic substances.
Automated Screening
The high-throughput-screening accessory (HTS-XT, see figure 12) is capable of the
automatic measurement and classification of large numbers of diamonds.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 12
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Diamonds are placed in specially designed sample plates, available with 96, 384 and 1536
measurement positions. This measurement set-up allows for the measurement of even very
small melee-sized diamonds, from the sub-milimeter range up to diamonds of several
milimeters.
For one position, the measurement time is about five seconds. The spectrum is
automatically evaluated and classified after the measurement. As with the ALPHA II
Diamond Analyzer, the HTS-XT based analyzer is able to distinguish between over twelve
different diamond types and is also able to identify diamond imitates.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 13
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
There are also many mixture types. The analysis software that is used in the HTS-XT
Diamond Analyzer and the ALPHA II Diamond Analyzer can discriminate between more
than twelve different types of diamond.
An example of the spectra of the most important types is shown in figure 13. The x-axis
shows the reciprocal value of the wavelength in cm-1 (i.e. how many waves exist over one
minute) which is a commonly used unit in IR-spectroscopy, and the y-axis the absorption.
Figure 13: Example spectra of different diamond types with characteristic peak positions.
Typically, boron impurities who peaks around 2800 and 2460 cm-1 and nitrogen impurities
show absorptions between ca. 500 and 1500 cm-1. The strong, broad bands between ca
1600 and 2700 cm-1 are known as phonon bands and are characteristic for all diamonds.
These are an excellent marker and can be used to differentiate between imitates and
diamonds.
In many cases, knowledge about the type of diamond is critical because it can be used to
detect synthetic stones and possible candidates for HPHT-treatment. Of special interest are
type IIa and type IaB diamonds because they can often be HPHT treated to change them
from grey or brown to colorless or pink. These changes in color significantly increase the
value of those diamonds.
Conversely, because type Ib diamonds very rare in nature, they are almost exclusively
HPHT-grown synthetic stones. The reason they are rare in nature is because natural
diamonds were subjected to very high pressures and temperatures over very long time
periods. In these conditions, the isolated nitrogen atoms of Ib diamonds can move around
within the lattice and aggregate into groups.
An A-aggregate forms when two N atoms combine, and the combination of two A-
aggregates (with a vacancy between them) forms a B-aggregate. As synthetic CVD-
diamonds are also available in gem-quality, type IIa diamonds can also be synthetic and
may therefore be subjected to further evaluation.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 15
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Table 2: Diamond type classification is based on the presence or absence of nitrogen and
boron impurities and their specific configurations in the diamond lattice. This diagram
shows only "pure" diamond types, most diamond types are "mixed" types.
This information has been sourced, reviewed and adapted from materials provided by
Bruker Optics.
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 16
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Bruker Optics
Address
Rudolf-Plank-Str. 27
Ettlingen
76275
Germany
Visit Website
Related Profiles
Bruker
Bruker Daltonics
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 17
/18
Reliable Diamond Analysis Performed By FTIR Spectroscopy
Bruker Optics, part of the Bruker Corporation is one of the world’s leading manufacturer and
worldwide supplier of Fourier Transform Infrared, Near Infrared and Raman spectrometers.
Bruker entered the field of FTIR spectroscopy in 1974. The early instruments set new
standards in research FTIR with evacuable optics, high resolution and automatic range
change. Since then, the product line has been continuously expanding with instruments
suitable for both analytical and research applications with exceptional performance
characteristics.
Today, Bruker Optics offers complete technical solutions for various markets which cover a
broad range of applications in all fields of research and development as well as industrial
production processes for the purpose of ensuring quality and process reliability.
Bruker Optics’ R&D and manufacturing center is located in Ettlingen, Germany, technical
support centers and sales offices are located throughout Europe, North and South America,
Asia, India, Middle East and Africa.
Territories Serviced
Global
P
Saved from URL: https://www.azom.com/article.aspx?ArticleID=18106 18
/18