Professional Documents
Culture Documents
LABORATORY
MODULE 04
Aircraft Pneumatics,
Air Conditioning and
Pressurization
Systems
1|Page
PHILIPPINE STATE COLLEGE OF AERONAUTICS
INSTITUTE OF ENGINEERING AND TECHNOLOGY
AERONAUTICAL ENGINEERING DEPARTMENT
Laboratory Module 4: Aircraft Pneumatics, Air Conditioning & Pressurization Systems
TABLE OF CONTENTS
Title Page
TABLE OF REFERENCES
References No.
Khan, O. (2016) Aircraft Structures and Systems, EASA Module 13,
Aviation Maintenance Technician Certification Series 1
https://cutt.ly/0nrt7MK
Moir, I., Seabridge, A. (2008) Aircraft Systems: Mechanical, Electrical, and
Avionics Subsystems Integration, 3rd Edition 2
https://cutt.ly/SnrtERp
U.S. Department of Transportation, Federal Aviation Administration. (2016).
Pilot's Handbook of Aeronautical Knowledge. Washington, D.C.
3
:The Administration : [Supt. of Docs., U.S. G.P.O., distributed]
https://cutt.ly/dnruhVH
U.S Federal Aviation Administration. (2018). Aviation Maintenance
Technician Handbook – Airframe Volume 1, US Department of Transportation 4
https://cutt.ly/UnruFCI
Federal Aviation Administration. (2018). Aviation Maintenance
Technician Handbook – Airframe Volume 2, US Department of Transportation 5
https://cutt.ly/cnruMst
Jeppesen; A Boeing Company. (2011). A&P Technician Airframe Textbook
6
https://cutt.ly/lnrybrz
2|Page
PHILIPPINE STATE COLLEGE OF AERONAUTICS
INSTITUTE OF ENGINEERING AND TECHNOLOGY
AERONAUTICAL ENGINEERING DEPARTMENT
Laboratory Module 4: Aircraft Pneumatics, Air Conditioning & Pressurization Systems
LEARNING OUTCOMES
3|Page
PHILIPPINE STATE COLLEGE OF AERONAUTICS
INSTITUTE OF ENGINEERING AND TECHNOLOGY
AERONAUTICAL ENGINEERING DEPARTMENT
Laboratory Module 4: Aircraft Pneumatics, Air Conditioning & Pressurization Systems
GENERAL INSTRUCTIONS
1. Using AutoCad, create a schematic diagram of the aircraft pneumatics and air conditioning
system. You can use various drawing references of different aircrafts on the internet. Indicate
the type of aircraft used and insert a short statement below the label of each component briefly
discussing its purpose and operation.
2. Plot it on A3 paper using the same format/layout you are using in your CADD 1 subject.
3. Attach your signature over your printed name on the honesty clause box shown below. Place
it on the lower right of your layout.
HONESTY CLAUSE
As a student of Philippine State College of Aeronautics, I hereby pledge to act ethically and
uphold the values of academic integrity, honor and excellence. I certify on my honor that I
have neither given nor received assistance from anyone in completing this assessment.
_______________________________
Signature over Printed Name
4|Page
PHILIPPINE STATE COLLEGE OF AERONAUTICS
INSTITUTE OF ENGINEERING AND TECHNOLOGY
AERONAUTICAL ENGINEERING DEPARTMENT
Laboratory Module 4: Aircraft Pneumatics, Air Conditioning & Pressurization Systems
GENERAL INSTRUCTIONS
1. In an A4 size of paper, specify some maintenance tasks and testing used for checking
functionalities and possible leaks in the aircraft pneumatics and air conditioning system
(preferably on an airliner). Provide a brief description of these maintenance tasks. Also,
describe the methods used in inspection of aircraft pneumatics and air conditioning systems.
2. Attach your signature over your printed name on the honesty clause box shown below. Place
it on the page succeeding the title page. Any format will do.
HONESTY CLAUSE
As a student of Philippine State College of Aeronautics, I hereby pledge to act ethically and
uphold the values of academic integrity, honor and excellence. I certify on my honor that I
have neither given nor received assistance from anyone in completing this assessment.
_______________________________
Signature over Printed Name
5|Page
PHILIPPINE STATE COLLEGE OF AERONAUTICS
INSTITUTE OF ENGINEERING AND TECHNOLOGY
AERONAUTICAL ENGINEERING DEPARTMENT
Laboratory Module 4: Aircraft Pneumatics, Air Conditioning & Pressurization Systems
GENERAL INSTRUCTIONS
1. This Laboratory Technical Report will be done by pair or by two (2) individuals. Your partner
with the Case Study in the Learning Module will also be your partner here. If there are some
instance that a certain student wants to comply these (both the Case Study and Laboratory
Technical Report) individually then he/she will be allowed to do that.
2. Create a video presentation of at least 5 minutes in length discussing the topics about the
Case Study No. 2 of Learning Module No. 6 about the study and analysis regarding the risk
of having infected COVID-19 when you are flying in an aircraft and inside the cabin. Also
provide an explanation regarding the operation and process of air conditioning system of an
aircraft and how it works.
3. You need to show yourselves on the video during the discussion of the subject matter. You
can use any animations, illustrations or any digital designs/medium to supplement your video
presentation.
4. Avoid using foul, obscene, offensive and defamatory remarks. Any videos which are deemed
inappropriate will be automatically obtain a grade of zero.
6|Page