You are on page 1of 4

Sika® ViscoCrete® Powder

Applications

Estrich screed

X >
Application Estrich
Estrich
- Gypsum or (cement) based
- Pumped
- Thick layers 50 to 100 mm

< X >
Starting formulation Estrich

Anhydrite based Approx


Anhydrite 375,00g
Portland cement 20,00g
Calcium carbonate 100,00g
Silica sand (0-4 mm) 500,00g

Potassium sulphate (Accelerator) 3,00g


Tylose H 20 P2 (Cellulose) 0,50g
Agritan 800 (Defoamer) 1,00g
ViscoCrete 125 or 225 0,20g

Water 17% - Compressive strenght 30 MPa

Note: These formulations are meant as guidelines only. The results will vary
depending on the ingredients used. Sika does not guarantee the performance of
these formulations in any way.

< X >
Starting formulation Estrich

Cement based (OPC/HAC) Approx


Portland cement (52,5) 40,00g
High aluminate cement 100,00g
Natural anhydrite 35,00g
Calcium carbonate 250,00g
Silica sand (0-4 mm) 500,00g

Tylose H 300 P2 (Cellulose) 1,00g


Agritan 800 (Defoamer) 1,00g
Tartaric acid (Retarder) 0,50g
Lithium carbonate (Accelerator) 1,00g
ViscoCrete 125 or 225 0,20g-0,50g

Water 18% - Compressive strenght 25 MPa

Note: These formulations are meant as guidelines only. The results will vary
depending on the ingredients used. Sika does not guarantee the performance of
these formulations in any way.

< X

You might also like