Professional Documents
Culture Documents
function incorrectly.
function incorrectly.
function incorrectly.
function incorrectly.
function incorrectly.
line device. Usually, this is a permanent fault (the hardware is broken).
ned upon unsupported procedure when in Download Mode.
ed. The unit cannot perform a complete start-up.
as been detected. The fault can reduce the gain performance of the MHA.
as been detected. The fault completely prevents the gain function of the MHA.
nfiguration is not valid, or a given parameter is incorrect.
nfiguration is not valid, or a given parameter is incorrect.
nfiguration is not valid, or a given parameter is incorrect.
nfiguration is not valid, or a given parameter is incorrect.
nt has failed. The TCOM cannot measure the internal delay for a cell for any of the RAKEs in a certain BB unit.
ed a loss of PPS signal in the reference received from the GPS receiver.
ed a loss of 2.048 MHz signal received from an external reference source, connected to Sync In interface of the System Module.
because of a hardware or software fault.
he Radio module.
non-critical configuration file is missing.
s from the clock on the Radio Module.
odule and the Radio module is out of synchronization.
ectly configured.
he System Module.