Professional Documents
Culture Documents
Boezemweg 5
3255 MC Oude-Tonge
Netherlands
Tel: +31 (0)10 231 0260
catalystsupport@mte-bv.com
MTE-PDS-MS-13X-DS1-rev03
It’s used commercially for air plant feed purification (simultaneous removal of H2O and CO2),
general gas drying and PSA oxygen generation process. It is also used commercially for
desulfurization of liquefied petroleum gas and dehydration of gases and liquids.
Abrasion (wt, %) < 0.1 < 0.1 < 0.4 < 0.4
This documents contains information that is subjected to the copyright of MTE Catalyst Support B.V., The Netherlands. None of
the information shall be used, copied or replicated without the written permission of MTE Catalyst Support B.V,The Netherlands
MTE Catalyst Support B.V.
Boezemweg 5
3255 MC Oude-Tonge
Netherlands
Tel: +31 (0)10 231 0260
catalystsupport@mte-bv.com
MTE-PDS-MS-13X-DS1-rev03
Pore size 10 Å
Molecular sieve type 13X is typically used in both liquid and gas phases and in the following
applications:
▪ Removal of carbon dioxide and moisture from air (air repurification) and other gases
▪ Removal of hydrogen sulfide and mercaptans from a variety of hydrocarbon and
natural gas streams
▪ Separation of oxygen from air – oxygen PSA process
▪ Catalyst protection
▪ Removal of oxygenates from hydrocarbons
▪ Static (non-regenerative) removal of solvent vapors and moisture from air
Molecular sieve MS 13X will adsorb molecules with a kinetic diameter of less than 0,9 nm
and exclude those which are larger.
Product must be stored in a dry location (relative humidity < 90%) to prevent re-adsorption
of water. Opened packages should be resealed to prevent contamination of the product.
Whenever possible, rotate stock to use oldest material first.
This documents contains information that is subjected to the copyright of MTE Catalyst Support B.V., The Netherlands. None of
the information shall be used, copied or replicated without the written permission of MTE Catalyst Support B.V,The Netherlands