Professional Documents
Culture Documents
ANT ASI4518R32v06 2960 Datasheet
ANT ASI4518R32v06 2960 Datasheet
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-2690-
65/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 862 1427 - 2690
Frequency range (MHz) 880 - 960
690 - 803 790 - 862 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.2 15.5 15.8 15.9 17.3 17.5 17.8 18.1
Gain (dBi)
over all Tilts 15.1 ±0.5 15.3 ±0.5 15.7 ±0.5 15.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5
Side lobe suppression for first side
> 15 > 15 > 17 > 15 > 17 > 17 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 67 ±2.5 65 ±2.6 61 ±2.3 73 ±6.0 69 ±5.5 68 ±5.7 63 ±4.7 58 ±4.0
Vertical 3dB beam width (°) 11.3 ±0.6 10.0 ±0.6 8.8 ±0.4 8.0 ±0.4 6.5 ±0.5 5.9 ±0.5 5.1 ±0.4 4.8 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 23 > 25 > 25 > 22 > 24 > 24 > 27 > 25
Cross polar ratio (dB) 0° > 22 > 22 > 22 > 19 > 22 > 21 > 20 > 17
Max. power per input (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
1695 - 2690 1695 - 2200
Frequency range (MHz) 2490 - 2690
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 17.3 17.5 18.0 18.2 16.9 17.3 18.0
Gain (dBi)
over all Tilts 17.1 ±0.5 17.3 ±0.5 17.8 ±0.4 18.0 ±0.6 16.8 ±0.5 17.1 ±0.5 17.7 ±0.5
Side lobe suppression for first side
> 17 > 17 > 16 > 16 > 17 > 18 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±4.8 64 ±6.0 58 ±6.8 58 ±6.9 67 ±4.2 66 ±4.6 58 ±4.4
Vertical 3dB beam width (°) 6.5 ±0.5 5.9 ±0.5 5.1 ±0.4 4.8 ±0.3 6.5 ±0.5 5.9 ±0.4 4.8 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30 (dB) > 27 > 28 > 27 > 27 > 24 > 26 > 25
Cross polar ratio (dB) 0° > 21 > 21 > 17 > 22 > 22 > 22 > 21
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
1
ASI4518R32v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-2690-
65/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 1999 x 369 x 149
Packing dimensions (H x W x D) (mm) 2265 x 435 x 240
Antenna weight (kg) 33.2
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 49.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1404
1999
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 985 (at 150 km/h)
Wind load (N) Lateral: 195 (at 150 km/h)
Rear side: 980 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
2
ASI4518R32v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-2690-
65/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx……..b1
HWMxxx……Ly1
HWMxxx……..r1 b1 Ly1 Cy2 Ry3
HWMxxx……Cy2
HWMxxx……Ry3
r1 r2
HWMxxx……..r2
r - Red y - Yellow b - Blue
C - Center array L - Left array R - Right array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2018-01-19