Professional Documents
Culture Documents
EDI FlexAir-Magnum-spec Sheet
EDI FlexAir-Magnum-spec Sheet
5
3 8
6
Unique to the FlexAir product is the ability to The FlexAir Magnum diffuser is ideally suited
configure the Magnum diffuser with a standard or for a wide variety of aeration and mixing
high capacity membrane for optimized aeration applications including tank and lagoon facilities.
capacity and engineered operating pressure For rigid piping applications, the FlexAir Magnum
performance. All FlexAir diffusers are configured diffuser is available with the Spectrum Saddle
with premium quality membranes engineered Mount for maximum mechanical durability and
by the Membrane Technologies division at EDI. ease of installation and maintenance. Unique
Alternate membrane materials and perforation to the Spectrum Saddle Mount is the ability to
designs are available for non-standard industrial expand, relocate, reconfigure or add diffusers
or municipal applications. to match process demands.
Top Wedge
Membrane Clamp O-Ring
Peforated Sleeve
Spectrum Saddle Mount
Bottom Wedge Air Lateral
Diffuser Type Design Airflow Overall Length Active Surface Area Dry Weight Net Operating Buoyancy
• Optimum oxygen transfer efficiency is achieved when operating in the middle to low end of the airflow range.
The approximate operating pressure of the diffuser at the mid-range is 13 to 16 inches.
• Operating the unit at the high end of the range will result in reduced performance and increased operating
pressure. Use the maximum airflow value for short term operations such as peak loads or system maintenance.