Professional Documents
Culture Documents
Level 2 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-2. Pre-requisite
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
[GH81-16436A]
Replace for
GH82-18798A
Backglass
[GH02-17355A]
[GH02-07406A]
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-4. Disassembly
※ Caution ※ Caution
Be care of scratch. Be care of scratch.
※ Caution
※ Caution
1) Be care of scratch.
Be care of Rear damage.
2) Be care of Rear and connector damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
※ Caution
1) Be care of scratch. ※ Caution
2) Be care of Rear and connector damage. Be careful not to damage the PBA.
3) Be careful not to damage the PBA.
※ Caution ※ Caution
1) Be care of scratch. 1) Be care of FPCB damage.
2) Be care of connector damage. 2) Be care of Ear jack connector.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
※ Caution
※ Caution
1) Be care of PBA damage.
Be care of several kinds of damage.
2) Be care of Front CAM connector.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-5. Assembly
※ Caution ※ Caution
Be care of FPCB damage. Be care of FPCB and Y-OCTA damage.
※ Caution ※ Caution
Be careful not to damage the PBA. Be care of scratch and REAR damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
5 Assemble the TOP+MID REAR Assy in 6 Screw 15points of the Front. And Insert
sequence.
sim tray
( * Torque : 1.3 kgf)
※ Caution ※ Caution
Be care of scratch and REAR damage. Be care of scratch and REAR damage.
※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch.
QSM01
QFR01
QAR01
QVO01 QMO01
QVO02 QBR01
QCK02 QCK01
QCR205
QCA01
QMP01
QCR210
QCA02
QCR210
QBA01
QJK01
QAN01
QSP01
QAN02
QCR205
QBC01
※ SVC REPAIR TAPE
QRT01
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
BEYOND0 REV0.7A EUR/KOR Confidential
TDMB_ANT
SPDT (KOR)
TDMB (KOR only) I2C
MAIN MAIN BT/WiFi ANT 24MHz FM RADIO (KOR only) FM_ANT BGS12SN6 TDMB
ANT 2 FC8080 RTC6213N FM ANT
ANT 4
32 KHz CLK From
FM_L/R
AP/CP PMIC
32K CLK
RFFE #0 from AP/CP PMIC PCM
LB LPAMID EAR_ADC_3.5
ETDAC_CH0 S761 ET
Modulator OMH LPAMID BT/WIFI PCIe(WiFi) CODEC_CLK_26MHz
2G PAM EAR_MIC
MAIN RF FE0
(U1008) DRX_UH BLAA2 SWB-E43 CODEC_SPI Audio Codec
USID 0x5 UART(BT)
ANT 1-2 B7/B40 4RX CODEC I2S CS47L93 EAR OUT L/R
PRX_UH BLAA2 COPR SPI
from DDI Mic 2
B1/3 4RX
Mic 1
B1_4_66/B3 B7/B40
Du al Saw Du al Saw
B34 Sa w
FM_ANT
GPS/ 26MHz AMP_I2S SPK AMP RCV
SENSOR HUB 32K CLK I2C CS35L40
MAIN PRX_T R_IN _B40_SCC PRX_LMH
BCM4775 from AP P MIC
ANT 1-1 HB PRX_T R_IN _B32_B1_4_40_66_4RX PRX_MHB5
LNA SPK AMP
B7/38/40/41 SPK
I2C 6AXIS_SPI CS35L40
OMH LPAMiD PRX_T R_IN _B7_4RX
BOO T_LDO
2.95V
I2C CAM PMIC1 Flash LED
Buck Booster VBAT S2MPB02
I2C
(S2ABB02)
TCXO
SUB 52MHz 2V MST_DATA WPC
4GB LPDDR4X WPC RTx
ANT 3 I2C
P9320S
TCXO 26M 4GB LPDDR4X MST_COIL
TCXO_FAR_26M_AP
MST SW
GPS/Sensor Hub
DRX_B7_4RX BT/WiFi I2C S2MIS01
DRX_T R_IN _B1_4_40_66_4RX_ DR X_MHB5 Codec IF PMIC
USB
DRX_B40_4RX OMH LFEM2 DRX_T R_IN _B39_B3_4RX DR X_MHB4 UART
MAX77705
X-TAL AP/CP Master PMIC 32K SW charger
DRX_ANT_MB_4RX (HFQRX4WJB-409) DRX_T R_IN _B7_4RX DR X_MHB1 32.768 S2MPS19
CLK USB OTG
(B1/3/4/66_4RX,B39) CCPD V_BATTERY
KHz (12B/1BB/29L) CHG_DET
UMIC
PWR
(Incl. Modem Power /TCXO Fuel Gauge
VBAT
Buffer) LED dr.
B38_41 Sa w
SPEEDY SBU1/2
SUB B39 Sa w CC 1/2
ANT 2
CHG_IN_5P0
SUB_READY_OK SUB_POWR_ON
PWR POK_3P8
GPS
VX_Setup(2018-08-09)_HHP
Created date of PCB data : 201
9/1/17 11:35:11
C2009
U2000
C2006
C2063
ANT2001
ANT2011 ANT2012
V2000
C2012
L2002
C2005
MIC9000
ANT5015
V2011 V2012
L5022
L5025
C5057
L5029
L5034
L2056
C2070
ANT5000
HDC10001
R5039
R5038
C5122
U5024
C5074
L5023
R5033
TH5000
V5005
V5008
C2078
L2064
C5121
L2021
L5027
F2000 R5012 C5103
C2018
V11060
C5100
C5101
L2015
V5009
C2022
C5090
C2066
L5026 C5119 L5052
U5007
C5035 C5036
BOTHHOLE11011
U5008
CON4000 C5120
RFS2001
L5018
L5020
L5053
BOTHHOLE11012
BOTHHOLE11013
BOTHHOLE11003
C10101
C5124
L5021
F5004
C10078
R5010 C2067
C10087
V11002
V11059
L10012
L5089
L10017 L5088
R5011
L2016 C2059
C2019
L2017
C2023
R6013
R6012
C10028
C10100
L5033
FEM2001
ANT11032
V11053
L5045 C5095
SC3013
C2073
C10094
C10095
C9031
R9004
R9021
C2024
R9024
TP10003 TP_SWDIO
SUS3001
C9074 L2023
R10014
L5014
L5081
L2022
C10077
C10071
L2040 C2043
R6011 C10093
GA11003 R10010
F5007
C5099 C5097 C5098 F2001
L2035
F2002
V11000
OSC5000 R10009
U10006
L2024
R6010 C10092
F5003
C3031
C5096
R6037 C10072
C5021
V2007
L9011
L9005
C2035
R6036 TP10006
C2029
L5013
L5047 L5046 C5126
C2026
L5086
TP10008 TP_USART10001 TP_USART10000 C10090
L2058 L2029
C5094
R10015
C5073
TP10009 TP10005
L2042
L2054
L2062
U2001
U5020
ANT5004
GA11002
L2065
L2031 C5059
SC3006
C2032
TP5035
C2034
L2060
F2004
ANT11041
L12010
C2072 L2059 L5017 V5002
L2053
C12025
ZD12004
ZD12008
C5083
L5016
L2001
C2037
R2000 L5015
C2041
C2040
TP5053
TP5057
BOTHHOLE11009
TP5052
TP5036
TH4000
TP5051
C4029
U5026
R5034
R4016
BOTHHOLE11010
ZD2000
C5104
HDC12000 C2052
C2074
ZD4011
C2069
ZD4010
SC3014
ZD10009
TP5050 TP5049
TP5019
L2000
TP9019
C2054 TP10001
ZD8002
R10013
R6014
R6015
TP10000
C10005
R10001
ANT8003
R10002
ZD8004
C10040
R8041
C2011 L2006
C10025
C10099
ANT2005
C10035
C10007 C10081
C8174
C10026
L10003
C10037
ANT8000 ANT8005
C2001
C10083
U10000
C10036
C10006
L10004
R8022
ZD10000
SC3002
C2000
L2007
C10004
HDC8000
C10003
C10046
HDC6000
R8018
C10002
C9004
GA11001
C10038 C10001
C9013
C9016
ZD12006
R12007
C12023 ZD12007
C12028
L12011
L5041
L9003 C8129 ZD8003
C10048
ZD12001 V11001
ZD12000
TP9021
C5053
L5042
U12002
C12022
C12024
C12026
D8001
C9012
TA8004
R8012
R8017
TH8002
C8132
ZD12002
U8025
R12008
C8180
C8159
C8157
C8154
C8151
C8173
C8150
C8103
C8104
C8179
C8105
C9007
R8006
BOTHHOLE11007
ZD8007 ZD8008
R8008
C8177
C8156
C8155
C8152
C8131
C8149
C8148
C8146
R8032
C8178
U8033
R8007
C8161
C8176
TA8005
DEBUG_IO
TP8017
C8160 C8145
C10082
V11056 TP8016
C5041 DEBUG_CLK
TA8006
U5011
TP8015
C8144
C5040
C8136
C8163
C8162
TA8007
C5080
C5071
C5123
C5079
C5072
TP5018
C8153
C5077
U5014
C5042
C5078 C5076
BOTHHOLE11017
R8019
R8037
C8171
C5075
L5037
R8020
L5039 TP5007
TP5012
TP5056
L5044 L5043
TP5013
C8114 C8112
U5004
TP5047
R5003
C5003
C5065
TP5046 TP5040
TP5045
TP5041
C5011
C5066
C5063
C5012
TP5048
C5064
C5068
C5000
U5025
C5061
TP5002
C5002
TP5043 TP5038
C5114
R6032
R6033
R5009
TP5044
C5067 TP5039
R5008
C5010
R5006
R6024
TP5014
C5001
TP5001
C8094 R6008 R6009
C4004
OSC8000
C4000
TP5000
C8023 TP8005 R6023
C8017
TP5003
C8101 C8095
C4006
C4005
C8100 R8001
TA8003
R6018
C8079
TP5005
C8039 C8034
TA8002
C8028
TP5006
C8022 C8083
L8017
TP5017
TP5016
C8089 C8080
L8012
L8028
C8086
C8068
C8088
C8087
C8002
C8078 C8102
C8172
C8085
C8167
C8005
L8013
C8043
L8016 C8031
C8047
C8084
C8081
C8053
C8050
C8025 L8014
C8006
C8051
TP8003
C8029
C8038
C8044
L8005 L8008
TP_TCXO_EN
L8026
L8010
L8011
L8007
C8082
C8054
C7098
SC3003 C7025
C7057
C7059
C7096
C7039
C7100
C7040
C7107
R6031
C8168
C8003
C7082
C7003
C7067
C7083
C7085
C7056
C7002
C7018
C7019
C7051
C7078
C7029
R6078
C7054
C8071
C7024
C7008
C7004
C7110
C7015
C7091 C7090
C7007
C7066
C7016
C7017
C7106
C8090 C7086 C8075
C7075
C7074
C8074
C7108
C7061
C7063
C8092
C7065
C7089
C7097
C7000
C8076
C8073
C7104
C7049
C7021
C7048
C7053
C7099
C7006
C7092
TP8006
C8077
C7005
C7095
C7088
C7020
C7055
TP8000
C7072
C7062
C7052
C7071
TP8022
C7050 C7009
C7103
TP8020
C7093
C7014
C8040
C7081
R8002
TP8019
C7022
TP8023
C7109
C7076 C7037
L8009
C7060
C7069
C7079
C8035
TP8024
C7105
C8008
C8000
C8037
C8001
R8039
TP8004
U8015
C8004
C8020
L8001 TA8000
C8012
C8166
C8056
L8006
C8011
C8165
TA8001
C12016
C12017
R12006
C8013
C8048
L12002
C12007
L12005 C8049
C12006
C12005
R12002
R12000
C12003 U12000
C12021
R12001
C12015
L12008
U12001
L12001
R12016
R12003
C12004
L12007
C12043
C12042
L12009
C12001
C12002
V11061
L12000
L12006
C12011
C12000
C12019
R5042
BOTHHOLE11014
V11052
C12033
R12015
L12003
R6002
R4026 R6003
R12011
R12010
C12034
C12031
BOTHHOLE11002
C12039
C12032
C12038
TP4007
C12041
TP4012
R3011
R3012
R3010
C3014
C3013
R3014
C3010 C3015
C3009
C3016
R3008
R3013
C3012
C3011
C3002
C3001
TCX3000
HDC12001
C4045
R3000
L2049
C3008
SC3007
U3000
C12035
L2047
C3029
C2045
L2046
C12036
C3020
L2043
C3019
C12045
C3023
C3022
C12046
R3003 TP3003
C3027
C12037
C1061
C3026
L1052
L1046
C3028
C12048
C1048
L1036
L1033
C12047
C3005
L1049
C3017
R3015 C1064
C11022 L1017 L1040 L1035 L1055 L1054
L1053
C1065
L1014
C3030
OSC11000 R3006
C11015
V11051
R3004
JTAG6002
C11016 R3001
V1005
L11000
R3002
C11035 C11034
BOTHHOLE11001
TP11000
R3007
C11014
R3005
L11002
TP11004
TP11002
U11030
F1000
C1009
TP11003
TP11005
C11009
C11008
L1008
TP11001
L11004
C1005
C11018
L11006
C1008
C11020
U11028
U11033
C11025
C11031 C11026
L1022
L1074 C1033
ZD9008 R9018
ZD11000
ZD9012
C9062
R9007
RFS1001
C9080
R1005
R1004
HDC9000
ANT1007
ANT1006
L1004 C1004
R1003
R1002
C1001
U1009
C1013
TP_UB1 TP_UB0
C1110
TP5015
L1050
C1002
C1132
RFS1000
C1130
C1129 C1128
C1066
R6061 R6060
R9013
R9025
ANT1005
TP9020
R11016
U11022
C11033
L11007
BOTHHOLE11006
R11014
R11003
R11015
ANT1010
V11003
R8013
BOTHHOLE11000
C1059
C1115
L11001
BOTHHOLE11005
C1116
C11011
R8038
TH8001
C8133
V11050
TH11000
ZD9010
C11032
C9005
C9073
C1058
L1043
ANT9001
C1117
C1003
C1126
L1082 L1007
C11036
U1001
C1037
L1021
U1004
C1032
L1027
C1134
C1012
C1133
L1028
L1024
L1006
SUS11001
SUS11002
C1108 L1013
C1015 L1002 C1111
MIC9001
JTAG6001
C1036
V1001
C1125
U1003 C1023 L1026
L1070
V1002
V1003
C1019
C1020
ANT1003
L1003
LFL152G45TC7C309(F5006) : IT'S
Wrong Polarity possibility.
Check the Pin1
VX_Setup(2018-08-09)_HHP
Created date of PCB data : 201
9/1/17 11:35:11
ANT2002
ANT2000
U5001
ANT5014
V2001
ANT5003
C2071
V5011
L2009
L10011
ZD5003
C5109
U5002
C5111
C5127
C2007
F2005
V5012
R5040
ANT5005
C2076
L5048
C5105
C2075
ZD5001
R5024
C5106
C2077
ZD5002
C5110
ZD5004 R5025
C5113
C5107
L5050
ANT2009
R5022
C5112
ANT2006
R5023 L5049
V11062
TP5031 TP5028 TP5023 TP5030
C2014 L2004
L10007
CD4000
TP5060
V2010
TP5027 TP5024 TP5022 TP_BT_EN
ZD9005
ZD9011
C9049
C9051
C10009
TP5058 TP5021
L10000
TP_WLAN_EN TP5032 TP5025 ANT9002 ANT9003
C10010
TP5020 TP5026 TP5029
V5001
ANT5006
CON4001
HDC10000
V5015
C10013
R6019
R6020
C10014
ZD10005
R6021
R6022
C10011
C10015
C10016
C10097
V11058
R10003
C10017
V2008 V2005
C10055
C10018
C10019
ANT2007
C10051
C10050
C10023
C10027
R6091
R6090
V11015
C10067
C10059
GA11004
HDC10002
C10065
C10066
C10057
C10053
C10054
C10034
C10052
C8175
ANT11035
U10003
C8169
C8170
ZD4012
L10008
L8027
C10047
V11016
C10058
C10061
C4041
C4042
ZD4020
L10006
ZD4022 ZD4015
C10064
C4017
C10056
R8024
R8023
C10062
C10063
R4024
R4003 C4033
L4006
ZD4001
R4022
R4000 ANT4000
R8026
R8025
ZD4021
ZD4009
ZD4007
ZD4008
C4023
C4039
C4040
R4001
TP8028
R4006
C4020
ANT4003
R8036
C8107
L8019
C4021
U8019
C8108
R4005
C8135
C8127
R4007
ANT4004
TH8000
R8009
R8034
R8035
C8134
C8139 C8137
L4001
C8124
ANT4001
U8031
R8029
C8128
L4000
C8113
C8141
C4010
C4002
TP4000
SC3004
L8020
C4011
R8031
C8143
C8106
C8138
U4000
C8115
L8023
C8126
C8118
C4009
C8119
C8123
C4012
TP8013
TP6001
TP6002
TP4004
TP4002
TP4001
UME4000 TP4003
TP4006
TP4005
C8091
TP4009
TP4008
TP8002
TP8031
TP8001
C4003
C8070
TP7000
ANT11036
C4007
V11006
C8072
C8069
TP8030
C7047
C7026
C7120
C7031
C7116
C7111
C4001
C7036
C7030
C7041
C7013
C7113
C7117
C7084
C7012
TH6000
C10020
C10012
R4025
C10086
L10013
L10009
L10016
R6041
R6080
R6082
C6000
TP8034
TP8033
R6040
UCP5000
C6001
TP8027
TP8021
TP_VSS_CPUCL7000
R6070 R6057
TP_VDD_CPUCL7000
R6071 R6053
R6035
R6063
C6002
R6034
SC3005
R6029
R6042
C7077
R6030
C6006
R8016
TP8008
TP8026
D8000
TP8029
R6005
R6004
TP6000
R6074 R6056
R6065
R6073 R6059
R6072 R6054
R6067
R6076 R6058
R6077 R6055
R6049
R6062
C12049
C6004
R12009
R6048
C12050
R6001
R6066
C12029
C9056
R9014
R9011
C7064
U9006
C9057
C9058
R9017
R9012
C7001
R6039
C8018
R6081
R6079
R6038
C7045
C7115
C7027
C7011
C7034
C8065
C7032
C7043
C7010
C7028
C7033
C7112
C7042
C7035
C7119
ZD11028
ZD11027
ZD11026
ZD11025
R6044
R9015
R4011
R6064
C6003
R6047
C8058
C8066
R9016
C8055
C8059
C8060
C8064
TP_VDD_G7000
TP_VSS_G7000
C4013
C4014
C4016
C4018
C11006
C11004
C11003
C11001
R6050
C9030
R6000
C7114
TP8040
TP8041
R6028 R6068
D9000
C9065
R6027
C9036
C9052
TP_CLK_MON
C9069
C9045
L9009
R6086
R6085
TP9004
TP9005
C9079
U9001
C9054
U9010
C9067 R9001
TP9002
TP9003
C9071 C9037
C9070
C9046 C9023
C9034
C9027
L9004
C9014
C9033
C9038
C9072
C9021
C12010
TP9012
TP9008
TP9010
R9008
C9018
C9040
TP9018
C9024
TP9007
C9068 D9001
R9019
C9032
C9028
C9044 C9050
TP9011
C9026
V11007
C9041
R9005
R9009
C9048
C9053
R9000
R9027 C9019
C12009 C12008 L9006 C9047
ANT11037
SC3009
C1118
C1099 L1065
C1091
C1092
L1069
U1008 C1093
L1066
C1090
C1098 C1095
C1100 C1097
C1096
C1106 C1105 C1094
L1067
C1018
ZD1001
C1083
L1016
C1119
L1060
C1081
PAM1000
C1041
PAM1001 C1082
SC3008
L1019
C1030
C1028
C1029
L1020
L1029
L1062
C1089
C1087 C1086
C1039 C1043 L1030 C1038
C1050
C1085 L1063
L1012
C1017
C1016
C1080
C1079
C1021
L1009
TP1007
C1078
TP1006
R4015
C4024
C1049
TH4001 L1034
C1051
U1006
U1005
R6045
R6043
C1052
L1032
C1042
L1018
C1044
R1001
L1044
F1001
C1034
ANT1011
L1037
L1072
L1039
L1073
C1063
L1048
R9026 C9059
C9055
L9008
C9066
R9010
ZD9004
ANT8008
ZD9007 L9007
L8025
C9060
ZD9006 L9010 C9061
C8147
JTAG6000
C8142
L8024
SC3010
C9078
C9063
C9064
ANT8007
ZD9002
C9081
ZD9001
R11018
ZD11009
ZD11002
R11012
ZD11016
R11017
C11000
ZD11003 ZD11004 C9009 C9006
L9002
R11013
ZD11010
C9029
C11002
C9011
C9008
R11005
R11004
R11020
ZD11001 R11019 ZD11015 R9022
ZD11014 ZD11017 U9005
ZD11007
ZD11006
C9000
R11010
ZD11011
ZD11012
ZD11018
R11022
C11005
ZD11020 R11023 TP9022
R11011
C11007
ZD11008
ZD11005
R8010
R11021 TP9016
ZD8006 ZD11013
C9075
TP9013
R11024 ZD11019 TP9014
TP9017
L1071 TP9015
V11055
C9001
V11031
ANT11042
C11013
ANT1013
JTAG6003
L11008
U11026
L11009
SUS3000
ANT11039
R4009
V1011
C1000 L1106
R4010
V11018
IFC11000
V11017
ANT11040
ANT1004
ANT1001
LFL152G45TC7C309(F5006) : IT'S
Wrong Polarity possibility.
Check the Pin1
8. Level 3 Repair ﺗﻬﯿﻪ ﺷﺪه در ﻣﺠﻤﻮﻋﻪ ﺟﻬﺎن آی ﺳﯽ
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-1. Power On
Yes
No
Charging the battery by TA.
No If its voltage level is extremely low
Check the Battery Voltage.
Is it more than 3.8V? (under 3.0V),
Change the battery.
Yes
No
No
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Initial
Initial Failure
Yes
No
Abnormal
No
Abnormal Check the TCX3000
Re Check "Power on" (Crack, open etc.)
Trouble shooting process Check the U8003 (Crack etc)
Normal
Change UCP5000
Abnormal
Change PBA
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-3. No Service
No service
Yes
No
Yes
No
No
Check the Voltage
C3017 : 0.8V, C8059 : 1.2V Replace the U8003
C8060 : 1.8V, C7105 : 0.75V
Yes
No
No
Check the clock TCX3000
Is the frequency 52MHz? Replace the TCX3000
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No
Change the SIM card. If the SIM card is
No
Check the SIM Voltage. still not working, check the U8003, U5025
(C4042,C4040) 1.8V or 3.0V? (Crack etc)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No Change to the new T Flash card.
Check the T-flash No If it doesn`t still work T Flash card after
Voltage. changing
(C4035) = 3.0V? the T FLASH, Check the U8003
(Crack etc)
Yes
No
Check the t-flash
CMD /Data/CLK. No
(ZD4020, ZD4015, ZD4001 4th
Check the UCP5000 (Crack etc)
pin)
Is signal ok?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Insert TA / USB
Yes
Yes
No
Charging Sequence Start
VBUS_IF_5P0(C9072) = 5V or 9V Replace IFC11000
No
Check the
CHG_IN_5P0(C9069)=5V or 9V
Replace U9010
Yes
No
Battery is Charging? Replace U8031
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Charging Sequence Start
VDD_RECT(C8160) = 5V ~ 11V Replace Combo Antenna
Yes
No
Check the
Replace L8020
VDD_WLCHG(L8020)=5V or 10V
Yes
No
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-7. OTG
Yes
No
Check the Check U8031
CHG_IN_5P0(L8021) = 5V (crack, open, damaged, etc.)
Yes
No
Check the Check U9010
VBUS_IF_5P0(C9072) = 5V
(crack, open, damaged, etc.)
Yes
No
Check OTG working ? Replace IFC11000
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
No
Check the voltage
Replace U8015
C5000 =1.8V
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C5074 =1.8V Replace U4005
Yes
No
No
Check R5008, R5009 Replace U4005
(I2C is OK?)
Yes
No
Abnormal
Check U5024
(crack, open, etc.) Replace U5024
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C5059, C5060 =1.8V Replace U5011
Yes
No
Check 6Axis No
MOSI, CLK, NSS, MISO pin Replace U5004
(SPI is OK?)
Yes
No
Abnormal
Check U5020
Replace U5020
(crack, open, etc.)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C5073 =1.8V Replace U5011
Yes
No
No
Check R5008, R5009
Replace U5004
(I2C is OK?)
Yes
No
Abnormal
Check U5023
(crack, open, etc.) Replace U5023
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the voltage No
L5049, C5113, C5110 =1.8V Replace U5011
(Sensor’s IO voltage)
Yes
No
Check the voltage No
L5048, C5109, C5111 =3.4V Replace U10000
(Sensor’s LED voltage)
Yes
No
No
Check R5006, R5007 Replace U5004
(I2C is OK?)
Yes
No
Check U5001 No
Reconnect U5001
(crack, open, etc.)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the voltage No
C5127 =1.8V Replace U5011
(Sensor’s IO voltage)
Yes
No
Check the voltage No
R5006, R5007 Replace U5004
(I2C is OK?)
Yes
No
No
Check U5002 Replace U5002
(crak, open, etc)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C5053 =1.8V Replace U8003
Yes
No
Yes
Check U5018 No
Replace U5018
(crack, damaged, etc.)
No
END
Yes
No
No
Check the voltage
C11013 =1.8V Replace U8003
Yes
No
Yes
Check U11026 No
Replace U11026
(crack, damaged, etc.)
No
www.jahanic.com
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the Fingerprint Sensor
connector on Main PBA Reconnect the HDC12000
Yes
No
Check the voltage No
C12025 = 3.3V Replace U12002
C12028 = 1.8V
Yes
No
No
Check the Fingerprint Sensor
MISO, MOSI, CLK, CS_N Pins Replace UCP5000
(SPI is OK?)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the No
MAIN_MIC_DATA at Replace MIC9001
C9073?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the No
SUB_MIC_DATA at Replace MIC9000
C9074?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-12. BT/WIFI
Yes
No
No
Check BT or WIFI fuction ON Enable BT or WIFI function.
Yes
No
Check the Voltage No Check the U8015
C5094 = 1.8V (Crack, open, damaged, etc)
Yes
No
Check the status of No
Resolder or change the C5100, C5101
C5100, C5101
Yes
No
Check the Voltage No
C5098 = 1.22V Resolder or change the C5098
Yes
No
Check the status of No
ANT5000,ANT5003,ANT5004, Resolder or change the wrong element
,ANT5005,ANT5006,ANT5014, (open, crack, deviation, etc)
ANT5015
Yes
No
No
Check the Status of
V5001,V5002,V5015,L5017,C5083,L50 Resolder or change the wrong element
58,L5015,L5086,F5003,L5081,L5012,V (open, crack, deviation, etc)
5005,C5085,L5023,C5087,C5057,F500
5,L5020,F5004,L5018,V5008,V5009,V
5012,V5011,C5090,L5089,L5054,L502
7,F5006,L5088,F5007,L5125,L5024,L5
029,L5056,C5091
Yes
No
Resolder or change U5007
ﺗﻬﯿﻪ ﺷﺪه در ﻣﺠﻤﻮﻋﻪ ﺟﻬﺎن آی ﺳﯽ
www.jahanic.com
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-13. GPS
Yes
No
Sweep down the button menu Touch the location icon in button menu
Check the location icon is enabled Or change to use in setting-connectivity-location
Yes
Yes
Yes
, C4034, L4032, L4034, F4004, C4035
Check No
The LNA input voltage = 2.8V @ L5033 check the U8003 and R5003
Yes
Yes
No
Check GNSS_HUB_EN check the UCP5000 and peripheral device
= 1.8V @TP5000
Yes
No
Check 26MHz Clock Check OSC input voltage = 1.8V @C5021
@ pin 3 of of OSC5000 If not, check VDD AUX = 1.8V@C5010
Yes Yes
Replace OSC5000
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-14. NFC
Yes
No
No
Check NFC function ON Enable NFC Function
Yes
No
No 1. Resolder or Replace
Check the Antenna connect
The ANT8000, ANT8003
ANT8000, ANT8003
2. Replace NFC / MST ANT
Yes
No
No
Check the Voltage on Replace the U8003
C5063 = 1.8V
Yes
No
No
Check 26MHz Clock at TP5044 Replace the UCP5000
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-15. MST
Yes
No
No
Check MST function ON Enable MST Function.
Yes
No
No 1. Resolder or Replace ANT8002,
Check the Antenna contact ANT8009
ANT8002, ANT8009 2. Replace REAR Assy’
Yes
No
No
Check the battery level
Charging the Battery
Battery >= 5%
Yes
No
No
Type *#0*# -> MST Test On
Resolder or Replace U8033
Check voltage on C8160
Yes
No
No
Check the Status of U8025 Resolder or Replace U8025
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. Display
Yes
No
No
Check the connection of Reconnect the HDC12001
HDC12001
Yes
No
Check
VDD_DDI_3P0 = 3.0V (C12035) No
VDD_DDI_1P8 = 1.8V (C12036) Resolder or Replace the U12001
VDD_DDR_1P6 = 1.6V (C12045)
Yes
No
Check
ELVDD_4P6 = 4.6V (C12047) No
ELVSS_-4P4 = - 5.4 ~ - 1.4V (C12037) Resolder or Replace the U12001
ELAVDD_7P6 = 7.6V (C12044)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Main Camera connector on
Reconnect the HDC10000
Main PBA
Yes
Yes
No
Check the CAM_MCLK is
Replace the PBA
26Mhz (L10016)
Yes
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
VDD_SWCAM_1P05, C10051=1.05V
Yes
No
Check the SWCAM_MCLK is
Replace PBA
26Mhz (L10009)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Front Camera connector on
Reconnect the HDC10001
Main PBA
Yes
Yes
No
No
Check the VTCAM_MCLK is
Replace the PBA
26Mhz (L10013)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-20. TSP
Yes
No
Yes
No
Check the voltage No
VDD_TSP_1.8V (C12032) = 1.8V
Resolder or Replace U8003
VDD_TSP_3.0V (C12031, C12038) = 3.0V
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-21. Motor
Yes
No
Check the Clip on MAIN PBA Resolder or Reconnect
ANT8007 and ANT8008 ANT8007, ANT8008
Yes
No
Check the L8024 and L8025 on MAIN PBA Resolder or Replace
(crack,open,etc) L8024, L8025
Yes
Yes
Replace Motor
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the TA connected to Connect TA to DeX Station
DeX station
Yes
No
No
No
USB Device is recognized Change the U8031
Yes
No
DeX Screen is
displayed to monitor
Yes
DeX work No END
No
Change Main
PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1005 ≥ -65dBm ? RFS1000 or L1001 or C1004 or
C1008 or C1005
YES
YES
NO
Resolder or change
Check L1008 ≥ -65dBm ?
L1008 or L1025
YES
YES
NO
Check C1026 ≥ -65dBm ? Resolder or change
C1026 or L1017 or L1014
YES
NO
Resolder or change
Receiver is O.K? U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1034 ≥ -65dBm ? RFS1000 or L1022 or C1033 or
L1074 or C1034
YES
YES
NO Resolder or change
Check C1064 ≥ -65dBm ?
C1064 or C1065 or L1053
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1005 ≥ -65dBm ? RFS1000 or L1001 or C1004 or
C1008 or C1005
YES
YES
NO Resolder or change
Check L1037 ≥ -65dBm ?
L1037
YES
YES
NO Resolder or change
Check L1049 ≥ -65dBm ?
C1067 or L1054 or L1049
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1005 ≥ -65dBm ? RFS1000 or L1001 or C1004 or
C1008 or C1005
YES
YES
NO Resolder or change
Check L1037 ≥ -65dBm ?
L1037
YES
YES
NO Resolder or change
Check L1051 ≥ -65dBm ?
C1068 or L1055 or L1051
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1005 ≥ -65dBm ? RFS1000 or L1001 or C1004 or
C1008 or C1005
YES
YES
NO Resolder or change
Check L1037 ≥ -65dBm ?
L1037
YES
YES
NO Resolder or change
Check C1062 ≥ -65dBm ?
C1062
YES
YES
NO Resolder or change
Check C1063 ≥ -65dBm ?
C1063 or L1048
YES
NO Resolder or change
Check L1051 ≥ -65dBm ?
L1051 or L1055 or C1068
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1005 ≥ -65dBm ? RFS1000 or L1001 or C1004 or
C1008 or C1005
YES
YES
NO Resolder or change
Check L1037 ≥ -65dBm ?
L1037
YES
YES
NO Resolder or change
Check C1049 ≥ -65dBm ?
C1049
YES
YES
NO Resolder or change
Check C1048 ≥ -65dBm
L1033 or L1036 or C1048
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C1107 ≥ -65dBm ? ANT1005 or C1066 or L1050 or
C1110 or C1107 or L1042
YES
YES
NO Resolder or change
Check L1044 ≥ -65dBm ?
L1044 or L1081
YES
YES
NO
Resolder or change
Check C1049 ≥ -65dBm ?
C1049
YES
YES
NO Resolder or change
Check C1048 ≥ -65dBm ?
L1033 or L1036 or C1048
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C1107 ≥ -65dBm ? ANT1005 or C1066 or L1050 or
C1110 or C1107 or L1042
YES
YES
NO Resolder or change
Check L1039 ≥ -65dBm ?
L1039
YES
YES
NO Resolder or change
Check C1061 ≥ -65dBm ?
C1061 or L1052 or L1046
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C1071 ≥ -65dBm ? ANT1012 or L1043 or C1058 or
C1059 or C1129 or C1071 or L1059
YES
YES
NO Resolder or change
Check L1058 ≥ -65dBm ?
L1058 or C1078
YES
YES
NO
Resolder or change
Check C1046 ≥ -65dBm ?
C1049 or L1035 or L1031
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C1071 ≥ -65dBm ? ANT1012 or L1043 or C1058 or
C1059 or C1129 or C1071 or L1059
YES
YES
NO Resolder or change
Check L1056 ≥ -65dBm ?
L1056 or C1072
YES
YES
NO
Resolder or change
Check L1032 ≥ -65dBm ?
L1032
YES
YES
NO Resolder or change
Check C1048 ≥ -65dBm ?
L1033 or L1036 or C1048
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
coaxial cable and Coaxial cable or mechanical material
mechanical material
YES
NO Resolder or change
Check C1034 ≥ -65dBm ? RFS1000 or L1022 or C1033 or
L1074 or C1034
YES
YES
NO Resolder or change
Check C1053 ≥ -65dBm ?
C1053 or L1040 or C1054
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2007 ≥ -65dBm ? ANT2001 or ANT2002 or V2001 or
L2009 or C2071 or C2007
YES
YES
NO
Resolder or change
Check L2006 ≥ -65dBm ?
C2011 or L2006 or C2077 or C2075
YES
YES
NO Resolder or change
Check L2012 ≥ -65dBm ?
C2013 or L2012
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2070 ≥ -65dBm ? ANT2011 or V2011 or L2057 or
C2021 or L2020 or C2070
YES
YES
NO Resolder or change
L2064 or C2018 or L2015 or C2066
Check C2020 ≥ -65dBm ?
or C2067 or L2016 or C2019 or
C2020 or L2017
YES
YES
NO Resolder or change
Check C2028 ≥ -65dBm ?
C2027 or L2027 or C2028
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2070 ≥ -65dBm ? ANT2011 or V2011 or L2057 or
C2021 or L2020 or C2070
YES
YES
NO Resolder or change
L2064 or C2018 or L2015 or C2066
Check C2020 ≥ -65dBm ?
or C2067 or L2016 or C2019 or
C2020 or L2017
YES
YES
NO Resolder or change
Check L2028 ≥ -65dBm ?
C2030 or L2033 or L2028
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2070 ≥ -65dBm ? ANT2011 or V2011 or L2057 or
C2021 or L2020 or C2070
YES
YES
NO
Resolder or change
Check C2029 ≥ -65dBm ?
C2022 or C2029
YES
YES
NO Resolder or change
Check L2028 ≥ -65dBm ?
C2030 or L2033 or L2028
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2070 ≥ -65dBm ? ANT2011 or V2011 or L2057 or
C2021 or L2020 or C2070
YES
YES
NO Resolder or change
L2064 or C2018 or L2015 or C2066
Check C2020 ≥ -65dBm ?
or C2067 or L2016 or C2019 or
C2020 or L2017
YES
YES
NO Resolder or change
Check C2025 ≥ -65dBm ?
L2025 or L2026 or C2025
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2036 ≥ -65dBm ? ANT2006 or ANT2008 or V2007 or
L2035 or C2035 or C2036 or L2037
YES
YES
NO
Resolder or change
Check L2047 ≥ -65dBm ?
C2047 or L2049 or L2047
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2036 ≥ -65dBm ? ANT2006 or ANT2008 or V2007 or
L2035 or C2035 or C2036 or L2037
YES
YES
NO
Resolder or change
Check L2043 ≥ -65dBm ?
C2045 or L2046 or L2043
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2007 ≥ -65dBm ? ANT2001 or ANT2002 or V2001 or
L2009 or C2071 or C2007
YES
YES
NO
Resolder or change
Check C2032 ≥ -65dBm ?
C2032 or L2031
YES
YES
NO Resolder or change
Check C2034 ≥ -65dBm ?
C2034 or L2032
YES
YES
NO Resolder or change
Check C2039 ≥ -65dBm
C2038 or L2038 or C2039
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2007 ≥ -65dBm ? ANT2001 or ANT2002 or V2001 or
L2009 or C2071 or C2007
YES
YES
NO
Resolder or change
Check C2032 ≥ -65dBm ?
C2032 or L2031
YES
YES
NO Resolder or change
Check L2029 ≥ -65dBm ?
L2029 or L2058
YES
YES
NO Resolder or change
Check L2047 ≥ -65dBm
C2047 or L2049 or L2047
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Change
Check status OK at mechanical material mechanical material
YES
NO Resolder or change
Check C2070 ≥ -65dBm ? ANT2011 or V2011 or L2057 or
C2021 or L2020 or C2070
YES
YES
NO Resolder or change
L2064 or C2018 or L2015 or C2066
Check C2020 ≥ -65dBm ?
or C2067 or L2016 or C2019 or
C2020 or L2017
YES
YES
NO Resolder or change
Check L2028 ≥ -65dBm ?
C2030 or L2033 or L2028
YES
NO
Receiver is O.K? Resolder or change
U3000
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
NO
Check C1089 Resolder or change
: About 33dBm ? C1088 or L1062 or C1089
YES
YES
NO
Check C1025 Resolder or change
: About 33dBm ? C1025 or L1008
YES
YES
YES
YES
NO
ANT is O.K? Change
Coaxial cable or mechanical material
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-45. DCS1800/PCS1900 Tx
YES
YES
NO
Check C1083 Resolder or change
: About 30dBm ? L1060 or C1083
YES
YES
NO
Check L1037 Resolder or change
: About 30dBm ? L1037
YES
YES
YES
YES
NO
ANT is O.K? Change
Coaxial cable or mechanical material
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
NO
Check L1037 Resolder or change
: About 23dBm ? L1037
YES
YES
YES
YES
NO
ANT is O.K? Change
Coaxial cable or mechanical material
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
NO
Check L1022 Resolder or change
: About 23dBm ? C1034 or L1074 or C1033 or L1022
YES
YES
NO
ANT is O.K? Change
Coaxial cable or mechanical material
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
YES
NO
Check C1025 Resolder or change
: About 23dBm ? C1025 or L1008
YES
YES
YES
YES
NO
ANT is O.K? Change
Coaxial cable or mechanical material
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.