Professional Documents
Culture Documents
USER DESCRIPTION
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
Trademark List
All other trademarks mentioned herein are the property of their respective
owners.
Contents
1 Introduction 1
1.1 Readers Guide 1
2 Capabilities 3
3 Technical Description 5
3.1 General 5
3.2 Dependencies and Requirements 5
3.3 Activation of Market Adaptation 5
3.4 Deactivation of Market Adaptation 5
3.5 Usage of Market Adaptation 6
3.6 Related Statistics 6
4 Parameters 7
4.1 Main Controlling Parameters 7
4.2 Value Ranges and Defaults Values 7
5 Concepts 9
Glossary 11
Reference List 13
1 Introduction
2 Capabilities
3 Technical Description
3.1 General
This Market Adaptation changes the lowest accepted signal strength level at
access burst to handle received CHANNEL REQUIRED and EGPRS CHANNEL
REQUIRED messages in the BSC, see the Function Specification Signalling
Connection Setup. Only EGPRS CHANNEL REQUIRED messages, with EGPRS
REQUEST REFERENCE bit set in the Information Element (IE), are considered
by the functionality of this Market Adaptation. To receive signal strength
(RXLEV) at access bust in the BSC, the functionality Reporting of Access Burst
Info (RABI) must be activated in the BTS.
3.5.1 Commands
New cell parameter ACCABMIN is introduced by this Market Adaptations in
the commands RLSSC and RLSSP.
3.5.2 Printouts
4 Parameters
5 Concepts
COUNTERS IN THE
TRAFFIC APPLICATION IN THE BSC
ll
STS
MEASUREMENT DATABASE (DB)
ll
REPORT PROGRAMS
ll
REPORTS
ll ll ll
ll
Glossary
CCCH
Common Control Channel
BSC
Base Station Controller
EGPRS
Enhanced General Packet Radio Services
IE
Information Element
MS
Mobile Station
SDCCH
Stand Alone Dedicated Control Channel
STS
Statistics and Traffic Measurement Subsystem
Reference List
Ericsson Documents
[5] RCCD
APPLICATION INFORMATION
[6] RLSSC
COMMAND DESCRIPTION
[7] RLSSP
COMMAND DESCRIPTION
[8] RMCNT
APPLICATION INFORMATION