Professional Documents
Culture Documents
SMW 605
_______________________________________________________________________
Application: SMW 605 is a highly effective ferrosilicon based inoculant for ductile
iron.
Chemical composition: % Si 62 - 68
% Al max. 1.0 *
% Ca 1.8 - 2.4
% RE 0.8 - 1.2
% Bi 0.8 - 1.2
Addition: Depending upon the prevailing conditions (quality of the base iron,
inoculation procedures, castings etc.) we recommend
Standard sizes: Grain size: GSK ( size for metal stream inoculation)*
0.2 - 2 mm
* In this grain size the Si-content can be slightly below the a. m. value.
Storage: Kept in a dry place, SMW 605 can be stored in its original packaging
indefinitely. Normal safety regulations are to be observed. For further
information, contact our shipping department.
D-84579 Unterneukirchen
Fabrikstrasse 6
SKW Giesserei GmbH Tel.: 08634/61-7408
Fax: 08634/61-7420 / Sales Department
08634/61-7455 / Shipping Department
The information given in this data sheet is based on our current knowledge and is intended to provide general notes on our products and their uses. Therefore, it should not
be construed as guaranteeing specific properties of products described or their suitability for a particular application, nor as providing complete directions for use. The
information implies no guarantee for product and shelf life properties, nor any liability or other legal responsibility on our part, including with regard to existing third party
intellectual property rights, especially patent rights. Application and usage of our products based on our technical advice is out of our control and sole responsibility of the
user. The user is not released from the obligation to conduct careful inspection and testing of incoming goods in order to verify the suitability for the intended application.
The quality management of SKW Metallurgie GmbH is certified and fulfill the requirements according to ISO 14001, OHSAS 18001, ISO 9001 and EMAS II.
The quality management of SKW Giesserei GmbH is certified and fulfill the requirements according to ISO 9001.
This technical data sheet is valid until replaced by a new issue..