Professional Documents
Culture Documents
RED SECTION
UNDERGROUND
PRODUCTS &
ACCESSORIES
PPB2MVG
PB – 2B
PB – 2G
**NOTE: BEIGE COLOUR PILLAR AND BASE AVAILABLE **
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
PPB2MVG POLY PILLAR – VENTED 305H x 355W x 320D GREEN 1.6
PPB2MVB POLY PILLAR – VENTED 305H x 355W x 320D BEIGE 1.6
PB – 2G POLY BASE – SLOTTED 355H x 556W x 524D GREEN 2.8
PB – 2B POLY BASE – SLOTTED 355H x 556W x 524D BEIGE 2.8
PB – 2G/1 POLY BASE WIDE OPENING 355H x 556W x 524D GREEN 2.7
PPB2MG POLLY PILLAR – NON VENTED 305H x 355W x 320D GREEN 2.7
ALLEN KEY
OR ‘D’ BOLT PSFB2 PSDB30 SLB – 2 SLP– 3
SPANNER
BDP495
BDP390
BDP240
PB - 2G
PPB2TVG
ALLEN KEY
OR ‘D’ BOLT PSFB2 PSDB30 SLB – 2 SLP– 3
SPANNER
1-4 UNDERGROUND DISTRIBUTION
www.fultonindustries.com.au
U.R.D. PILLARS PLASTIC
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
PB – 2G/1 POLY BASE WIDE OPENING 355H x 556W x 524D GREEN 2.7
The PB2G/1 is basically an identical Plastic Base to the PB-2G except slots for the Panels have been removed, leaving
a Wider Opening in the top.
PPB2TVG POLY PILLAR – VENTED TALL 540H x 355W x 320D GREEN 2.4
PPB2TVG50R PPB2TVG50R
Mounted on
PB-2G Base
COMPLETE ASSEMBLY
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
POLY PILLAR RISER – 50mm HIGH –
PPB2TV50R/G 50H x 355W x 320D GREEN 0.7
SUPPLIED WITH 85mm LONG BOLTS
Plastic Pillar Riser increases the height of the Pillar when top dressing covers the pillar bolts, making access difficult.
**Different Heights available, Conditions Apply**
BDP4/600 TYPE 'X' SWITCH PANEL 600H x 320W x 10 THICK BLACK 0.28
SLIDING PANEL HOLDER FOR
SPHPB4 35H x 365W x 40 THICK BLACK 0.56
BDP4/600
SECURITY BOLT/WASHER
PSFB2 4 PER PILLAR G304 STAINLESS STEEL
(4 PER PILLAR)
‘D' HEAD BOLT/WASHERS
PSDB30 4 PER PILLAR G304 STAINLESS STEEL
(4 PER PILLAR)
SLP4/12 LOCKING PLATE TO SUIT PADLOCK 1 PER PILLAR G304 STAINLESS STEEL
SLB4/12 LOCKING BOLT FOR SLP4/12 1 PER PILLAR G304 STAINLESS STEEL
PPBNF1V1D PPBNF1V1D
(WITH DOOR) (DOOR NOT SHOWN) PPBNF1V
PB-NF1
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
BDP180
SECURITY BOLTS/WASHER
PSFB2 2 PER PILLAR G304 STAINLESS STEEL
(2 PER PILLAR)
‘D' HEAD BOLT/WASHERS
PSDB30 2 PER PILLAR G304 STAINLESS STEEL
(2 PER PILLAR)
LOCKING PLATE FOR
SLP - 2S 1 PER PILLAR GALVANISED STEEL
PADLOCK
SLB - 2 LOCKING BOLT FOR SLP2S 1 PER PILLAR G304 STAINLESS STEEL
The Locking Plate and Bolt are optional. Pillar/Base is Fire Retardant, UV stabilized and made from Virgin Grade
Material. Nominate Security Bolts required. Endeavour (Integral) Energy Approved. Panels are blank unless quoted
to include accessories.
PPB3T
BDP370
The Locking Plate and Bolt are optional. Pillar/Base is Fire Retardant, UV stabilized and Virgin Grade Material.
Nominate Security Bolts required.
Endeavour (Integral) Energy Approved. Panels are blank unless quoted to include accessories.
FPB2MV1DG FPB2MVG
PB – 2G
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized. Panels are blank
unless quoted to include accessories. Lock provided for pillar with door.
FPB2TV BDP495
PB - 2G PB – 2G
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
GREEN/
FPB2TV FIBREGLASS PILLAR - VENTED 510H x 270W x 220D 5
BEIGE
FIBREGLASS PILLAR - VENTED GREEN/
FPB2TV1D 510H x 270W x 220D 6
SINGLE DOOR BEIGE
FIBREGLASS PILLAR - VENTED GREEN/
FPB2TV2D 510H x 270W x 220D 7
TWO DOOR BEIGE
GREEN/
PB-2G POLY BASE - SLOTTED 355H x 556W x 524D 2.8
BEIGE
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized. Pillar with Door
fitted with lock. Panels blank unless quoted to include accessories.
Pillars can be supplied unvented for diving bell application.
FDP1M
FPB1MV2D
(SPECIAL)
FB-1VB
FB -1VB
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized. Panels are blank
unless quoted to include accessories. Pillars with doors are supplied with locks.
*Verticle back for next to wall installation
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
FPB1TV FIBREGLASS PILLAR VENTED 610H x 320W x 257D GREEN/ BEIGE 5.9
FIBREGLASS PILLAR - VENTED
FPB1TV1D 610H x 320W x 257D GREEN/ BEIGE 6.4
SINGLE DOOR
FIBREGLASS PILLAR - VENTED
FPB1TV2D 610H x 320W x 257D GREEN/ BEIGE 6.9
TWO DOOR
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized. Panels are blank
unless quoted to include accessories. Pillars with doors are supplied with locks.
*Verticle back for next to wall installation
USFPNF1/E
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
GREEN/
FPBNF1V FIBREGLASS PILLAR - VENTED 760H x 450W x 330D 7
BEIGE
FIBREGLASS PILLAR - VENTED - GREEN/
FPBNF1V1D 760H x 450W x 330D 8
SINGLE DOOR BEIGE
FIBREGLASS PILLAR - VENTED - GREEN/
FPBNF1V2D 760H x 450W x 330D 9
TWO DOOR BEIGE
GREEN/
FBNF1 FIBREGLASS BASE 310H x 565W x 335D 4.7
BEIGE
BLANK PANEL / FRAME
700H x 420W x 10 THICK BLACK/
USFPNF1/E ASSEMBLY C/W BLANK 5.2
(PANEL) GREY
ESCUTCHEON
TYPE X SWITCHPANEL - BLANK 700H x 420W x 10 THICK
USFPNF1 BLACK 5
WITH FRAME ASSEMBLY (PANEL)
PSFB2 SECURITY BOLTS/WASHER 4 PER PILLAR G304 STAINLESS STEEL
‘D' HEAD BOLT/WASHERS
PSDB30 4 PER PILLAR G304 STAINLESS STEEL
(4 PER PILLAR)
LOCKING PLATE TO SUIT
SLP - 1 1 PER PILLAR G304 STAINLESS STEEL
PADLOCK
SLB - 1 LOCKING BOLT TO SUIT SLP - 1 1 PER PILLAR G304 STAINLESS STEEL
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized.
Panels are blank unless quoted to include accessories. Add /E to the panel for an Escutcheon panel.
Lockwood Nightlatches are provided for the Pillars with doors.
Panel Frame is galvanized and all hardware is stainless steel.
FPBNF2V1DB
USFPNF2
FB-NF2G
FB-NF2B
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
FIBREGLASS PILLAR - VENTED
FPBNF2V1D 1300H x 450W x 330D GREEN/ BEIGE 20
- SINGLE DOOR
FIBREGLASS PILLAR - VENTED
FPBNF2V2D 1300H x 450W x 330D GREEN/ BEIGE 21
- TWO DOOR
FBNF2 FIBREGLASS BASE 310H x 565W x 335D GREEN/ BEIGE 5.2
The Locking Plate and Bolt are optional. Pillars and Base are Fire Retardant and UV stabilized.
Panels are blank unless quoted to include accessories.
Nightlatches are provided for the pillars. Panel frame is galvanized and all hardware is stainless steel.
FPBNF8VG
USFPNF8
FBNF8HLG
The Locking Plate and Bolt are optional. Pillar and Base are Fire Retardant and UV stabilized. Panels are blank
unless quoted to include accessories. Frame for the panel is galvanized and all hardware is stainless steel. Pillars
made to order.
FPB6V1DG
FB6G
The Locking Plate and Bolt are optional. Pillar and Base are Fire Retardant and UV stabilized. Panels are blank
unless quoted to include accessories. Frame for the panel is galvanized and all hardware is stainless steel. Pillars
made to order.
CATALOGUE
DESCRIPTION
NO.
POLYETHYLENE PANEL WILL ACCOMMODATE 6 x 100 AMP. SERIES 7 FUSES
PLUS NEUTRAL LINK PLUS 1 x STREET LIGHT FUSE, OR 4 x 100 AMP FUSES,
PDP280
3 x ACTIVE LINKS AND A NEUTRAL LINK.
PANELS SIZE: 280H x 205W. PILLAR: PPB2TV or PPB2MV
TYPE X SWITCHPANEL WILL ACCOMMODATE 8 x 60/80 AMP. SERIES 7 FUSES
BDP240 PLUS NEUTRAL LINK, OR 3 x ACTIVE LINKS AND A NEUTRAL LINK. PANEL SIZE:
240H x 205W. PILLAR: PPB2MV
TYPE X SWITCHPANEL AS ABOVE. PANEL SIZE: 240H x 283W.
BDP240W
PILLAR: PPB2MV
TYPE X SWITCHPANEL WILL ACCOMMODATE 8 x 60/80 AMP. SERIES 7 FUSES
BDP390 PLUS 3 x ACTIVE LINKS AND A NEUTRAL LINK. -
PANEL SIZE: 390H x 205W x 10 THICK. PILLAR: PPB2TV
BDP390W TYPE X SWITCHPANEL. PANEL SIZE: 390H x 283W x 10 THICK. PILLAR: PPB2TV
TYPE X SWITCHPANEL WILL ACCOMMODATE 12 x 60/80 AMP. SERIES 7 FUSES
PLUS NEUTRAL LINK, OR 8 x 60/80 AMP. SERIES 7 FUSES PLUS
BDP495
3 x ACTIVE LINKS AND A NEUTRAL LINK -
PANEL SIZE: 495H x 205W x 10 THICK. PILLAR: PPB2TV
TYPE X SWITCHPANEL. PANEL SIZE: 495H x 283W x 10 THICK.
BDP495W
PILLAR: PPB2TV 1.835kg
TYPE X SWITCHPANEL WILL ACCOMMODATE 3 x 60/80 AMP. SERIES 7 FUSES
BDP180
AND A NEUTRAL LINK. PANEL SIZE: 180H x 200W x 6.35 THICK. PILLAR: PPB3M
TYPE X SWITCHPANEL WILL ACCOMMODATE 3 x 60/80 AMP. SERIES 7 FUSES
BDP370
AND AN ACTIVE LINK. PANEL SIZE: 370H x 270W. PILLAR: PPB3T
* Escutcheon panels can be fitted to accommodate circuit breakers.
CATALOGUE
DESCRIPTION
NO.
FIBREGLASS BLANK PANEL WILL ACCOMMODATE 12 x 60/80 AMP. SERIES 7 FUSES
PLUS NEUTRAL LINK OR 6 x 60/80 AMP SERIES 7 FUSES, 3 x ACTIVE LINKS AND
FDP1M
NEUTRAL LINK. PANEL SIZE: 430H x 355W. PILLAR: FPB1MV
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. FDP1M/E**
FIBREGLASS BLANK PANEL WILL ACCOMMODATE 12 x 60/80 AMP. SERIES 7
FUSES, 3 x ACTIVE LINKS AND NEUTRAL LINK.
FDP1T
PANEL SIZE: 620H x 355W. PILLAR: FPB1TV.
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. FDP1T/E**
FIBREGLASS BLANK RIGHT ANGLE PANEL WILL ACCOMMODATE
12 x 60/80 AMP. SERIES 7 FUSES, 3 X ACTIVE LINKS AND NEUTRAL LINK OR
12 x 60/80 AMP. SERIES 7 FUSES ON THE VERTICAL TOGETHER WITH 3 x 400 AMP.
FDP1TRA
REMOVABLE ISOLATING LINKS CAN BE ACCOMMODATED
ON THE HORIZONTAL. PILLAR: FPB1TV
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. FDP1TRA/E**
TYPE X SWITCHPANEL BLANK AND SECURED TO UNISTRUT FRAME DESIGNED TO
ACCOMMODATE A RANGE OF 3 PHASE FUSE DISCONNECTORS AND SINGLE
USFPNF1
PHASE FUSES. PANEL SIZE: 685H x 420W x 10 THICK. PILLAR: FPBNF1V
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. USFPNF1/E**
TYPE X SWITCHPANEL BLANK AND SECURED TO UNISTRUT FRAME DESIGNED TO
ACCOMMODATE A RANGE OF 3 PHASE FUSE SWITCH DISCONNECTORS AND
USFPNF2
SINGLE PHASE FUSES.
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. USFPNF2/E**
TYPE X SWITCHPANEL BLANK AND SECURED TO UNISTRUT FRAME DESIGNED TO
ACCOMMODATE A RANGE OF 3 PHASE FUSE SWITCH DISCONNECTORS AND
USFPNF7 SINGLE PHASE FUSES.
PANEL SIZE: 1100H x 640W x 10 THICK. PILLAR: FPB7V1D
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. USFPNF7/E**
TYPE X SWITCHPANEL BLANK AND SECURED TO UNISTRUT FRAME DESIGNED TO
ACCOMMODATE A RANGE OF 3 PHASE FUSE SWITCH DISCONNECTORS AND
USFPNF8
SINGLE PHASE FUSES. PANEL SIZE: 400H x 420W x 10 THICK
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g.USFPNF8/E**
TYPE X SWITCHPANEL 590H x 490W x 10 THICK, UNISTRUT FRAME
USFBDP12
**Add ‘/E’ to CATALOGUE NO. FOR ESCUTCHEON PANEL e.g. USFBDP12/E**
TYPE X SWITCH PANEL BLANK 1110L x 655W x 10 THICK AND SECURED TO
USFP3
UNISTRUT FRAME
NOTE: ALL PANELS AND ESCUTCHEONS SUPPLIED BLANK UNLESS QUOTED TO INCLUDE ACCESSORIES
CATALOGUE
DESCRIPTION
NO.
FPB12V, FB12 FPB12 Fibreglass Pillar, FB12 Fibreglass Base and USFBDP12 UniStrut Frame
& USFBDP12 with Panel c/w 2 x 400Amp Fuse Disconnectors and Interlinking Busbars
c/w FD400x2 covered by Lexan Shroud
Paralleling/Open Point Load Break – Load Make Touch Safe Switches –
OP2W
400amp (2-way) fits PPB2TV Pillar
Paralleling/Open Point Load Break – Load Make Touch Safe Switches –
OP3W
400Amp (3-way) fits PPB4TV and FPB1TV Pillars (not shown above)
FPB12VG
USFBDP12
FB12G FB12G
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
FIBREGLASS PILLAR
FPB12V 750H x 500W x 420D GREEN/ BEIGE 8
VENTED
FIBREGLASS BASE FOR 280H x 940W x 825D
FB12 GREEN/ BEIGE 7
FPB12V (including flange)
BLANK PANEL/FRAME TO
USFBDP12 590H x 490W BLACK
SUIT FPB12V
SECURITY
PSFB40 4 PER PILLAR G304 STAINLESS STEEL
BOLTS/WASHERS
LOCKING PLATE TO SUIT
SLP4/12 1 PER PILLAR G304 STAINLESS STEEL
PADLOCK
LOCKING BOLT FOR
SLB4/12 1 PER PILLAR G304 STAINLESS STEEL
SLP4/12
The Pillar and Base are Fire Retardant and UV stabilized and constructed from a high impact fibreglass material
to enhance strength. The 12mm vent holes have stainless steel insect proof gauze molded on the inside to stop
wasps and bees entering.
The base is constructed from fibreglass, reducing breakage in transit. The vertical back on the base allows for
close installation of the pillar (base to a wall in restricted pedestrian areas).
The frame is made from UniStrut which allows the panel to be adjusted from front to back for varying switch and
fuse depths. Panels supplied blank unless quoted to include accessories.
The Panel is capable of fitting 2 x 400Amp Fuse Disconnectors side by side. Pillar and Base Approved for use on
Essential (Country) Energy Network.
FUSE SWITCH
DISCONNECTOR
- ADDITIONAL
FB-3G
FB-3G
CATALOGUE WEIGHT
DESCRIPTION SIZE (mm) COLOUR
NO. (kg)
FIBREGLASS PILLAR - GREEN/
FPB3CD1D 1280H x 710W x 280D 23
SINGLE DOOR BEIGE
FIBREGLASS PILLAR - GREEN/
FPB3CD2D 1280H x 710W x 280D 25
TWO DOOR BEIGE
236H x 944W x 520D
GREEN/
FB3 FIBREGLASS BASE (dimensions include 10
BEIGE
flange)
TYPE X SWITCH PANEL- 1110H x 655W x 10
USFP3 BLACK 20
BLANK - FRAME ASSEMBLY THICK
FPB3CD1D
FB3CDEB
(EXTENDED BASE)
The Fibreglass Pillar – FPB3CD was primarily designed to be equipped with Vertical Fuse Disconnectors and able to
distribute loads of up to 2500 Amperes (shown in photo above). The Extended Base allows for larger bending radius
of cables, hence reducing the stress on the cable and making termination of cables onto busbars or Fuse
Disconnector etc., easier. The Pillar itself has a removable door with two (2) Nightlatches and a Removable Front
Panel, secured with six (6) Allen Head Set Screws. The base has a 10mm Thick Aluminium Chequered Plate
Areas of Application
Cable Distribution Cabinets (CDC) Installation Low Voltage distribution in Transformer Substations Switchboard for
industry, housing and office building.
FB7RFG
FB7G FB7G
WEIGHT
CATALOGUE NO. DESCRIPTION SIZE (mm) COLOUR
(kg)
FIBREGLASS PILLAR - VENTED GREEN/
FPB7V1D 1280H x 720W x 580D 26
SINGLE DOOR BEIGE
FIBREGLASS PILLAR - VENTED GREEN/
FPB7V1HD 1280H x 720W x 580D 27
SINGLE HINGED DOOR BEIGE
FIBREGLASS PILLAR - VENTED GREEN/
FPB7V2D 1280H x 720W x 580D 30
TWO DOOR BEIGE
FIBREGLASS BASE- RETURN GREEN/
FB7RF 295H x 720W x 580D 9
FLANGE BEIGE
GREEN/
FB7 FIBREGLASS BASE 295H x 720W x 580D 9
BEIGE
TYPE X S/PANEL - BLANK -
USFPNF7 1100H x 640W x 10 THICK BLACK
FRAME ASSEMBLED
Pillar and Base are Fire Retardant and UV stabilized. Panels blank unless quoted to include accessories. Busbars can
be mounted to insulating bracket to allow for the mounting of strip fuses, will accommodate 5 strip fuse units 100mm
wide. Neutral Bar also provided with 12mm diameter drilled holes. Hardware can be provided upon request. Frame for
the panel is galvanized and all hardware is stainless steel. Pillars are made to order. Nightlatches are provided for the
pillar with lift off door, hinged door pillar has 3-way locking mechanism. Pillar depth can be increased in increments of
290mm for use as an “on site” plinth pour. Pillar mounting bolts located inside pillar.
CATALOGUE
DESCRIPTION SIZE (mm) COLOUR
NO.
FIBREGLASS CABINET
FPB10125V1D 1000W x 1200H x 500D GREEN/ BEIGE
VENTED SINGLE DOOR
FIBREGLASS BASE TO
FB-105 1000W x 300H x 500D GREEN/ BEIGE
MATCH FPB10125V1D
FIBREGLASS CABINET
FPB10127V1D 1000W x 1200H x 700D GREEN/ BEIGE
VENTED SINGLE DOOR
FIBREGLASS BASE TO
FB-107 1000W x 300H x 700D GREEN/ BEIGE
MATCH FPB10127V1D
FIBREGLASS CABINET
FPB13125V1D 1300W x 1200H x 500D GREEN/ BEIGE
VENTED SINGLE DOOR
FIBREGLASS BASE TO
FB-135 1300W x 300H x 500D GREEN/ BEIGE
MATCH FPB13125V1D
FIBREGLASS CABINET
FPB13127V1D 1300W x 1200H x 750D GREEN/ BEIGE
VENTED SINGLE DOOR
FIBREGLASS BASE TO
FB-137 1300W x 300H x 750D GREEN/ BEIGE
MATCH FPB13127V1D
FIBREGLASS CABINET
FPB15127FV1D 1500W x 1200H x 750D GREEN/ BEIGE
VENTED SINGLE DOOR
FIBREGLASS BASE TO
FB-1575 1500W x 300H x 750D GREEN/ BEIGE
MATCH FPB15127FV1D
The above Cabinets are made to order and can be provided with Unistrut frames fitted with stainless steel plates and
earth bars for 2-way and 3-way High Voltage junctions. Low Voltage units supplied with Type X Switch Panel
mounted onto a Unistrut frame. Pillars have a standard IP rating of IP34 and can be made to an IP rating of IP55
upon request. Please consult factory for details. Base Flange are 100mm Wide to aid in stability in soil and an
internal flange can be supplied when bolting to a concrete pad. Add ‘RF’ to Base Part Number for Return (Internal)
Flange.
The photos below depict just two of our custom made projects. You give us the specifications and we will endeavour to
make it for you. Also available 2D and 3D Computer Aided Drafting, along with CNC machines and repetition lathes, to
aid in the manufacturing process.
Cabinet shows 6-Way High Voltage Junction Point and Earth bar.
Cabinet was made with hinged removable doors (3-Way Locking) and removable centre upright.
Metal Cabinets are made in various sizes, materials and can be powdercoated in numerous colours. All Cabinets are
drawn on the latest technology in 3D Computer Aided Drafting before the start of manufacture. This ensures the
customer knows exactly what they are going to receive when the product is finished.
Long Dome enclosure inside PP05 Pit Long Dome next to PP05 Pit
*These Enclosures and Pits are used in Essential (Country) Energy Network Standard
PHOTOELECTRIC
CONTROL SWITCH CAP
FOR STREET LIGHTING
STREET LIGHT
TERMINAL SWITCH
CLA240/90-1-2-3-4
(sector lugs provided at 90o offsets)
A/F
WIRE
STUD Hex
PART NO. SIZE øA B D øE F G H J
(mm) Die
(mm²)
Size
CL 1.5 - 4 1.5 4 8.0 4.2 1.0 4.0 5.0 18.5
CL 1.5 - 5 1.5 5 1.8 7.5 8.0 5.2 1.0 4.0 55.0 18.5
CL 1.5 - 6 1.5 6 10.0 6.2 0.8 5.0 6.0 20.5
CL 2.5 - 4 2.5 4 8.0 4.2 1.0 4.0 5.0 18.0
CL 2.5 - 5 2.5 5 10.0 5.2 0.8 5.0 6.0 20.0
2.4 7
CL 2.5 - 6 2.5 6 N/A 10.0 6.5 0.8 5.0 6.0 20.0
CL 2.5 - 8 2.5 8 11.0 8.2 0.7 6.5 8.5 24.0
CL 4 - 5 4 5 10.0 5.2 1.0 5.0 6.0 22.0
CL 4 - 6 4 6 10.0 6.2 1.0 5.0 6.0 22.0
3.1 9
CL 4 - 8 4 8 12.0 8.2 0.8 5.0 8.5 26.0
CL 4 - 10 4 10 12.0 10.2 0.8 6.5 10.5 32.0
CL 6 - 5 6 5 10.0 5.2 1.2 6.5 6.0 23.0
CL 6 - 6 6 6 12.0 6.5 1.0 5.0 9.0 27.0
4.4 3.8 9
CL 6 - 8 6 8 12.0 8.4 1.0 6.0 9.5 27.0
CL 6 - 10 6 10 16.0 10.2 0.8 5.5 11.0 32.0
CL 10 - 5 10 5 12.0 5.2 1.8 9.0 8.0 27.0
CL 10 - 6 10 6 12.0 6.5 1.8 6.0 8.0 27.0
CL 10 - 8 10 8 5.7 4.7 10 14.0 8.4 1.6 6.0 9.0 29.0
CL 10 - 10 10 10 16.0 10.5 1.4 7.0 10.5 32.0
CL 10 - 12 10 12 18.0 13.0 2.4 8.5
CL 16 - 6 16 6 11.0 6.5 2.4 8.0 37.0
CL 16 - 8 16 8 14.0 8.4 1.7 6.0 9.0 39.0
6.3 5.5 19
CL 16 - 10 16 10 16.0 10.5 1.5 7.0 10.0 41.0
CL 16 - 12 16 12 18.0 13.0 2.4 8.0 13.0 46.0
CMCB – 1 CMCB - 2
3HTB 6HTB
TERMINATION SHROUDS
PVCSHR1 PVCSHR4
CATALOGUE SIZE
DESCRIPTION COLOUR
NO. A B C T
PVCSHR1 SHROUD TO SUIT MCB-1 MAINS BLOCK 90 55 65 2 BLACK
SHROUD TO SUIT MCB-2 MAINS BLOCK
PVCSHR4 150 95 105 BLACK
AMC2, AMC3, AND MCB3B
Shrouds are used to cover electrical connections in Streetlight Columns, Pillar Boxes or on Aerial Connections.
Made from Fire Retardant PVC Carbon Black Material. Two (2) holes are molded into the bottom rim to allow a
cable tie to hold the shroud in place.
AMC3
AMC2
AMC2 - terminated with a 50mm² dropper wire connected to a 3 Hole Terminal Block
CATALOGUE WEIGHT
DESCRIPTION
NO. (kg)
AMC2 TWO WAY ALUMINIUM MAINS CONNECTOR (120-240mm²) 0.265
AMC2-1 TWO WAY ALUMINIUM MAINS CONNECTOR (50-120mm²) 0.265
AMC3 THREE WAY ALUMINIUM MAINS CONNECTOR (120-240mm²) 0.280
AMC3-1 THREE WAY ALUMINIUM MAINS CONNECTOR (50-120mm²) 0.280
* Replacement Shear Bolts can be supplied when fitting is re-used.
Manufactured from high conductivity Aluminium. Grooves in the main body ensure good electrical contact
when the shear bolts are tensioned to their breaking capacity. Pressure Pads are grooved and are attached to
the shear bolt to ensure they are not lost. Dropper wires are provided if required, from connection points in
three (3) places around the main body for service take-offs to feed consumer supply.
The PVC No. 4 Shroud has been designed to fit the Mains Connector to ensure insulation between the cable
phases. Holes are provided in the Shroud to allow cable ties to hold the Shroud captive on the connector.
(Heatshrink Shrouds are also available).
ENERGY AUSTRALIA/ AUSGRID LOW VOLTAGE SWITCH PILLAR FOR 240mm² FOUR CORE, SOLID
ALUMINIUM CONDUCTOR, XLPE INSULATED, PVC SHEATHED CABLES (240 AL4 XQ Z/SAC)
(LV1-61)
Open Point Paralleling Pillar – 400AMP LOAD BREAK / LOAD MAKE – 2 Way.
Currently on Trial at Endeavour (Integral) Energy - NSW and Alinta - VIC. For further details, please call the
factory.
CABLE GUARD
The PCG-1500 and PCG-1500D Poly Cable Guards are easily extendable, as one end is raised to accept the opposite
end of another Poly Cable Guard, giving a much stronger join than butting ends together that are identical.
The PCG-3000E comes in a 3.0 metre length and in majority of cases does not require to be joined together.
This product is used to protect the base of street light columns. The cover eliminates
the need for cementing around the base of the column. It also acts as protection against protruding rag bolts.