The document contains input parameters for a hydraulic fracturing model including surface temperature, pressure, proppant concentration, fluid and slurry densities, and nitrogen injection rate. It then displays the corresponding output of total fluid rate, nitrogen rate, nitrogen dissolved in fluid, clean fluid rate, sand rate, slurry density, and total rate with a foam quality of 36% and nitrogen injection rate of 8.6 bpm.
The document contains input parameters for a hydraulic fracturing model including surface temperature, pressure, proppant concentration, fluid and slurry densities, and nitrogen injection rate. It then displays the corresponding output of total fluid rate, nitrogen rate, nitrogen dissolved in fluid, clean fluid rate, sand rate, slurry density, and total rate with a foam quality of 36% and nitrogen injection rate of 8.6 bpm.
The document contains input parameters for a hydraulic fracturing model including surface temperature, pressure, proppant concentration, fluid and slurry densities, and nitrogen injection rate. It then displays the corresponding output of total fluid rate, nitrogen rate, nitrogen dissolved in fluid, clean fluid rate, sand rate, slurry density, and total rate with a foam quality of 36% and nitrogen injection rate of 8.6 bpm.