Professional Documents
Culture Documents
com
1 2 Next PressWise
I have an Error coming from our Galileo Machine, Error Number 0101 (Selected bin has no cassette). Learn how…….
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 1/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
Regards
Jack
VladCanada
Well-known member
#2
Remove the panel and electronics box cover at the PlateManager (opposite side to cassette loading
area) to see LEDs grid on the electronics PCB.
Check the Opics reflective Sensor of PlateManager located at the side opposite to Pizza
door/loading area.
Sensor have to read reflective Cat's Eye label on the back side of the Cassette.
LED #30 CASS (Cassette Present).
Check Cassette Badcode reading Sensor, located at the left side of Pizza door loading area to see
two LEDs on the same PCB: Cassette ID Clock and Cassette ID Data; they both blink when cassette
barcode passes the Sensor.
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 2/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
J
Jack1979
Member
#3
Thanks Vlad,
Regards.
Jack
J
Jack1979
Member
#4
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 3/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
Thanks Vlad,
Regards.
Jack
J
Jack1979
Member
#5
We check the Sensors and LED Lights on the PCB Panel its working fine,
we try to clean the sensors and made plates (12pcs) its working perfectly, then the error showed
again, before only 4-6 plates only and the error showed up.
Regards
Jack1979
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 4/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
J
Jack1979
Member
#6
We check the Sensors and LED Lights on the PCB Panel its working fine,
we try to clean the sensors and made plates (12pcs) its working perfectly, then the error showed
again, before only 4-6 plates only and the error showed up.
Regards
Jack1979
VladCanada
Well-known member
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 5/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
#7
Do you have a message " PM Plate Data base does not agree with Console Plate Data"?
J
Jack1979
Member
#8
Error 0101.
Error 0101.
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 6/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
regards
Armya Inc
Well-known member
#9
Jack1979 said:
View attachment 4458
Load smallest cassette on the bin 1 and move the bin to unload position. Check the LED on the
sensor, if the sensor is OFF, then turn the POT CCW with aid of a small screw driver in order to turn
the LED ON on the sensor. Now remove the cassette by opening the pizza door. The LED has to turn
OFF. If it is ON after removing the cassette out completely, then turn the POT CW to turn it off. You
need to do this few times by loading and unloading the cassette or moving the bin to load/unload
position .
Give me a feed back on this procedure before I lead you through more complicated procedure for
resolving this issue.
VladCanada
Well-known member
#10
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 8/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
Armya Inc
Well-known member
#11
VladCanada said:
Yes, that's the best they can do, Farshad!
It looks like the sensor works exactly at the edge of its sensitivity and needs more
sensitivity to be adjusted.
Click to expand...
VladCanada
Well-known member
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 9/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
#12
Or KOREAN TIMES
Armya Inc
Well-known member
#13
VladCanada said:
Or KOREAN TIMES
Click to expand...
Korean Times sold their Machine. I removed the Galileo from their site.
VladCanada
Well-known member
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 10/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
#14
Wow, I did not know that. The crate price was so high, so KTWeb boss just stopped any attempt to
sell their VS.
Armya Inc
Well-known member
#15
VladCanada said:
Wow, I did not know that. The crate price was so high, so KTWeb boss just stopped any
attempt to sell their VS.
Click to expand...
Finally KTWEB sold their Galileo Vs.Nice people to work with. The managment and staff were
cooperative.
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 11/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
VladCanada
Well-known member
#16
Armya Inc
Well-known member
#17
VladCanada said:
I have tried to keep that machine in a good shape
Click to expand...
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 12/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
You did an excellent job. You are a professional and will stay professional on the top. You are the
one and glad to have you on this forum.
By the way, I shipped and provided online support to install the Galileo Vs in Russia. It is installed by
a Russian Engineer. It is fully operational and in an excellent condition. Hope this will make you
happy.
J
Jack1979
Member
#18
Regarding the error 0101, still show and here i attached a photo of the all sensors i have on the back
of the pizza door.
Can i have you personal mail so that i can send a video of the panel board while we are making
plates.
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 13/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
Attachments
Cass U9.jpg
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 14/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
2 MB · Views: 165
Armya Inc
Well-known member
#19
Jack1979 said:
Good Day to All,
Regarding the error 0101, still show and here i attached a photo of the all sensors i have
on the back of the pizza door.
Can i have you personal mail so that i can send a video of the panel board while we are
making plates.
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 15/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
VladCanada
Well-known member
#20
U9 Blue Sensor is your Cassette presence sensor. This sensor has a potentiometer to adjust its
sensitivity.
Similar threads
lantz_xvx
Jul 25, 2023
PostPress, Binding and Finishing Discussion
Replies: 15
Views: 845
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 16/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
Aug 3, 2023
lantz_xvx
W
Xante Consumable Report & Reset Drum Counters - Just Info for EnPress Owners
WeberPrinting
May 16, 2023
Digital Printing Discussion
Replies: 3
Views: 904
Aug 23, 2023
Quickerprinting
Q
noelward
Sep 27, 2023
Editorial/White Papers
Replies: 0
Views: 1077
Sep 27, 2023
noelward
A
Exposure head error on SCREEN CTP PLATERITE4100
Aaron
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 17/18
8/12/23, 2:14 π.μ. Agfa CTP Galileo VXT | PrintPlanet.com
noelward
Oct 17, 2023
Forums PrePress and Workflow Agfa Systems
Editorial/White Papers
Views: 494
Community platform by XenForo® © 2010-2022 XenForo Ltd.
Oct 17, 2023
noelward
Share:
Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
https://printplanet.com/threads/agfa-ctp-galileo-vxt.22230/ 18/18