Professional Documents
Culture Documents
TDS G-10
TDS G-10
4-3-90, Nishimikuni,
Yodogawaku, Osaka, Japan
TEL +81-6-6394-2655
FAX +81-6-6391-3151
G-10
Acrylic silicone copolymer emulsion for emulsion paint
Composition
Acrylic silicone copolymer emulsion
Product properties
Appearance Milky-white emulsion
Solids content (JIS K 6828) 49.0 ± 1.5 %
Viscosity (BM type, 12 rpm, 23°C) 500 ~ 1500 mPa.s
Ionicity Anionic
pH (JIS K 6828) 8.0 ~ 10.0
MFT Approx. 25 °C
Particle size (Average) 160 ± 20 nm
Density 1.07 ± 0.01 g/㎥
Tg (Calculated) 15 °C
Storage
Can be kept for at least 1 year if stored correctly between +5 °C and < +30 °C.
Application properties
Characteristic 1) Excellent weathering resistance
2) Environmentally friendly water –based system
3) High gloss value of 60~ 80% at 60 degree gloss
4) Good water and alkali resistance
Uses Emulsion paint for Roof and wall
1
Head office address: 4-3-90, Nishimikuni, Yodogawaku, Osaka-shi, 532-0006, Osaka, Japan
Office: Sendai, Saitama, Tokyo, Shizuoka, Chubu, Hiroshima, Fukuoka
Homepage http://www.polyma.co.jp
Properties and Uses
G-10 is suitable as a binder for emulsion paint for Roof and wall, and makes high-gloss film.
G-10 forms a film which has excellent weathering resistance and fast drying.
Film’s alkali and water resistance are also excellent.
How to Use
Minimum film-forming temperature (MFT) is approx. 25 °C.
When it is used at normal temperature, the MFT should be lowered by adding coalescing agents
such as Texanol, Butyl cellosolve, Butyl carbitol acetate and Dowanol DPnB.
Coalescing agents should be chosen considering water solubility, evaporation rate, stability and so
on.
This information is based on our present state of knowledge and is intended to provide general
notes on our products and their uses. It should not therefore be construed as guaranteeing
specific properties of the products described or their suitability for a particular application.
Any existing industrial property rights must be observed. The quality of our products is
guaranteed under our General Conditions of Sale.
210520
2
Head office address: 4-3-90, Nishimikuni, Yodogawaku, Osaka-shi, 532-0006, Osaka, Japan
Office: Sendai, Saitama, Tokyo, Shizuoka, Chubu, Hiroshima, Fukuoka
Homepage http://www.polyma.co.jp