Professional Documents
Culture Documents
ACRILEM ST190
Acrilem ST190 is a small particle size, medium hard styrene-acrylic water
Product
dispersion specifically designed for the formulation of high quality interior/
Description
exterior wall coatings.
The good compatibility with pigments and extenders normally used in the
coating industry together with the excellent intrinsic wetting properties of
this binder, allow the formulators to formulate paints in a wide range of PVC
still maintaining good water and scrub resistance.
Water absorption
(after 48h of immersion of a film dried for 72 hours 6%
at 23°C., 50% +/- 5 R.H.)
Applications Acrilem ST190 is an universal binder suitable for producing a large variety of
water based coatings for interior and exterior applications including wall
plasters, wood sealers, flexible liquid membranes, caulks and sealants with
the following benefits:
Acrilem ST190 can also be used as a binder for flocking on plastic surfaces,
in particular on polystyrene, and in textile finishing compounds.
Pag1/2 (05-04)
Icap-Sira Chemicals and Polymers Spa - tel. +39 0331 496111 - fax +39 0331 495005 - e.mail: info@icapsira.com - www.icapsira.com
®
ACRILEM ST190
Usage Acrilem ST190, due to its peculiar styrene/acrylic composition and the
Suggestions small particle size, shows a very high binding power toward pigments and
extenders, an excellent water and alkali resistance and a total lack of
residual tackiness of the dried film.
Interior wall paints with PVC up to 85%, still maintain interesting washable
characteristics.
Coalescing agents should be added to the grinding paste and the choice
and the quantity of the most suitable one, to be used alone or blended with
others, is strictly related to the required performances of the finished
products such as the minimum film forming temperature, gloss, final
hardness, scrub and washable resistance etc, etc.
Even if Acrilem ST190 shows excellent wetting properties, for a long term
storage stability, it is usually necessary to make sure of the complete
dispersion of the pigment paste which has to be made using efficient
equipment and the right amount of wetting and dispersing agents.
Note
These technical data and suggestions are based on information we believe to be reliable
and are given in good faith but without any guarantee, as conditions and methods of use
of our products are beyond our control.
The consumer should apply our products to his own working conditions and determine
the suitability of our materials and suggestions before adopting them on a commercial
Pag2/2 (05-04)
scale.
Nevertheless the suggestions concerning the use of our products must not be considered
as recommendation for any possible patent violation.
Icap-Sira Chemicals and Polymers Spa - tel. +39 0331-496111 - fax +39 0331 495005 - e.mail: info@icapsira.com - www.icapsira.com