Some tips on Unigo Evolution
on android devices
When you launch the app
Here to reach
the settings
To create a new project
To link the project to the
image folder of png pictures
(pictures does not exceed
about 60ko)
The project list
Click here to accept
Click on
your project
and edit to
set the
background
Click here
to add
objects or
First, the connexion connexions
to your ethernet
shield with its
modbus TCP
address
Click here to add
nters: an address
for each object you'll
put on your
background image
of your project
The list of all the
pointers used in the
project
lused Readholding
registers for lights
and gauges and set
Holding registers for
button and sliders
To create a pointer
for a light, a button,
a slider and a gauge
Now, back return
and insert object on
your background
A binary button
sean linked to its pointer
and 2 pictures for
staph ON an OFF states
Examples for a light,
a slider and a gauge
ect Bers mone
stebron imate
— =a Example of a
rotating switch
art
To run the project
To run the project
If this line remain:
communication
problem, bad
address, bad
pointers settings
Indicates Start the
connexion
Tips to change or upload and modify a new project
Click in the corner and go
to project
The basic project is called unigo.gui
and it is stored in
/storage/emulated/0/ where you
have also to download the directory
“UniGOPictures”
Select the project
“arduyakindu" and click hel
CRRRrErr
Then Read
It's reading
The page of the project
Add items...
Select the name of your project and
over "Write" before changing of
project
Select another project in the
directory and "Read"
Different pages of your
project....déja vu