Professional Documents
Culture Documents
Lock for 1 or 2 leaf fire / panic exit doors compliant with the DIN18251,
TECHNICAL CHARACTERISTICS:
• Centre distance 72 mm
Lock for panic fire doors EN1125 and EN179 standards. • Bar shaft (two-point) 30, 45,65 mm. for locks with 65, 80, 100
mm backset sizes respectively.
DINFIR3 - Panic exit lock for 1-2 leaf two-point and three-point doors Datasheet 2022_03 - Non-contractual document. Subject to change.
with 1 or 2 leaves • Panic exit lock with 3 latch points for 1 or 2 leaf doors with latch and
deadbolt, function C, series code 2DC3*
with 2 or 3 latch points • Panic exit lock with 3 latch points for 1 or 2 leaf doors with latch and
deadbolt, function D, series code 2DD3*
• Panic exit lock with 3 latch points for 1 or 2 leaf doors with latch and STANDARDS
DIN18251:2020-04
deadbolt, function E, series code 2DE3*
EN1125:2008
Two-point: EN179:2008
• Panic exit lock with 2 latch points for 1 or 2 leaf doors with latch and DIN107:1974-04
deadbolt, function B, series code 2DB2*
• Panic exit lock with 2 latch points for 1 or 2 leaf doors with latch and TEXT FOR SPECIFICATIONS:
deadbolt, function C, series code 2DC2* Locks compliant with DIN18251, compliant with EN1125 for
• Panic exit lock with 2 latch points for 1 or 2 leaf doors with latch and panic doors with 3 latch points, and compliant with EN 179 for
deadbolt, function D, series code 2DD2* emergency doors. Series code 2DB3*, 2DC3*, 2DD3*, 2DE3*,
• Panic exit lock with 2 latch points for 1 or 2 leaf doors with latch and 2DB2*, 2DC2*,2DD2*,2DE2* of DINFIR3 range, with casing and
cover overlapping at the 3 connection points with the faceplate,
deadbolt, function E, series code 2DE2* rendering them extremely sturdy and, in particular, resistant to
lateral forcing (break-in attempt).
Backset sizes 65, 80, 100, 2, and 100 mm for 1-leaf doors
Round-cornered faceplate (square-cornered version optional)
24x3 mm faceplate (optional 20x3 mm)
Zinc plated steel faceplate (also available painted RAL 7035 grey or
in stainless steel)
Reverse latch for inward opening emergency doors.
Right or left handed, in LH, compliant with DIN107
INSIDE
OUTSIDE
with 1 or 2 leaves
with 2 or 3 latch points
HIGHLIGHTS
• Locks compliant with DIN18251, compliant with EN1125 for
panic doors and compliant with EN 179 for emergency doors.
• With the 2-point and 3-point lock versions, the two and
three latch points ensure better alignment between the
door and frame (panic lock for 1-leaf door), or between the
door and the passive leaf (lock for 2-leaf door), especially
in case of large doors, resulting in better fire resistance
performance.
• Through-holes for fastening handle and cylinder escutcheons.
• The lock casing and cover overlap in the 3 connection
points with the faceplate, rendering the lock extremely
sturdy especially resistance to lateral forcing (break-in at-
tempts).
• The front panel can be unscrewed for replacement or a
change of finish.
• The range is highly modular - by switching the left/right han-
ded configuration of the faceplate (by simply unscrewing)
and reversing the latch, the left/right handed configuration
of the lock is also switched.
iseo.com
DINFIR3
THREE-POINT
with 1 or 2 leaves
with 2 or 3 latch points
11
12
A Section G-G
Different code
A X1 X2
65 19.5 25.5
80 19.5 25.5
B C D E F
Detail A
iseo.com
DINFIR3
TWO-POINT
with 1 or 2 leaves
with 2 or 3 latch points 12
Section G-G
A X
65 30
80 45
A
100 65
B F D E F
Detail A
iseo.com
DINFIR3 MATCHING ACCESSORIES
• 2D7* series counter-locks, for closing/opening the secondary
Lock for panic fire doors leaf.
• 24x3 mm flat strike plates (optional 20x3 mm)
DINFIR3 - Panic exit lock for 1-2 leaf two-point and three-point doors Datasheet 2022_06 - Non-contractual document. Subject to change.
with 1 or 2 leaves • Zinc plated steel counter plates (also available in stainless
steel)
with 2 or 3 latch points • Different (screw fastened) faceplates allowing for different
choices of finish
• Panic exit devices:
PALMO Type A (series 949*)
PUSH PALMO Type B (series 944*)
Palmo Type A (series 949*) IDEA BASE Mortise type A (series 94C*)
PUSH Mortise type B (series 94F*)
• Emergency Exit Devices:
Lever handles series 032*
Mortise Pad series 94G*