Professional Documents
Culture Documents
Special collets
Pick-up collets
Guide bushings
Bar feed collets
CAV bar feed collets
Inside clamping sleeves
Rotating inserts
Turbo-bar feed collets
Turbo rotating inserts
VKK
Edge With the new productnavigator you will easily find the
Visit us online
www.edgetechnologies.com
Custom Solutions 2
Products 6
SUMMARY.
CUSTOM SOLUTIONS
S-Slot guide bushing
• Ideal if high-pressure cleaning is used in the machine, no chip and dirt debris
in the guide bush
• Concentricity of the guide bush <0.005 mm
• Deviations of the material can be bypassed
• Ideal for square- and hex material
• Even guiding
• Guiding without marks on the material
• Easy to clean after the use
S-Slot collet
• Clamping without marks on the material
• Concentricity of the collet <0.005 mm
• Deviations of the material can be by-passed
• Ideal for square- and hex material
• High and even tension
• No debris in the collet, since it completely closes
• Easy to clean after the use
SB guide bushing
• Ideal for swiss type machines
• For materials with hard gliding properties, like titanium
• Prevents welding of guiding area and part (Stick-Slip-Effect)
BL guide bushing
• For titanium processing, has better gliding properties
• Ideal for smaller quantities, is the less expensive alternative to the SB guide bush
• Prevents the welding of the material in the guide bush
Special Collets
• Various special profiles, steps and adaptation to partial contours realizable
Overgripping collet
• Used on a pick-off spindle when it is required to clear a shoulder and grip on
a smaller diameter beyond (over the shoulder collet)
Step collet
• Clamping on two different diameters possible
• Available for all collet types
Smooth
• Standard up to ø 5,9
• Bigger sizes also available in smooth with additional cost
Serrated
• Standard grooved from diameter ø 6,0 and above
Serrated
• vertical & horizontal grooved (L & Q)
Carbide coating
• (inside)
Supergrip
K°
l
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
101 E 8 12 8 5 42 16 1,0
F8
TF8 1,5 - 2,5 0,5
PR PR
PR PR
PR PR
10,0
PR = per request
K°
l
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
All collets mentioned in this catalog can be delivered with a long nose.
K°
I
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
18,0
20,0
All long nose collets can also be delivered with special tooling spaces
K°
I
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
28,0
K°
I
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
TF 43 43 53 46 10 92 16 3 - 38 1,0
4 - 32 1,0
4 - 27 1,0
173 E 48 60 50 9 94 15 1,0
F 48
1,5 - 2,5 0,5
6,0
6,0
K°
I
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
TF48 48 60 50 9 94 15 1,0 - 43
4 - 37
4 - 30
K°
I
S
A
d
D
part no. ød øD øA length I (mm) length L (mm) cone α (degree) inside shape clamping range (mm) increments (mm)
(mm) (mm) (mm)
S
D
d
G
part no. ø d (mm) ø D (mm) length L (mm) cone α (degree) thread G inside shape clamping range (mm) increments (mm)
1,0
3,5
PR PR
PR PR
1,0
PR PR
PR = per request
S
D
d
G
part no. ø d (mm) ø D (mm) length L (mm) cone α (degree) thread G inside shape clamping range (mm) increments (mm)
4,0
inner thread: 5,0 - 6,0 1,0
26,44 x 1,058
7,0 - 16,0 1,0
5,5
18,0
PR PR
PR = per request
part no. ø d (mm) ø D (mm) length L (mm) cone α (degree) thread G inside shape clamping range (mm) increments (mm)
B0385 10 - 36 1,0
10 - 30 1,0
K°
S
D
d
A
part no. ø d (mm) ø D (mm) ø A (mm) length I (mm) length L (mm) Type Inside shape clamping range (mm) increments (mm)
PR PR
PR PR
PR PR
PR PR
PR = per request
°
15
S
D
d
G
part no. ø d (mm) ø D (mm) lenght L (mm) thread G inside shape clamping range (mm) increments (mm)
PR PR
PR PR
PR PR
PR PR
PR = per request
Custom solutions can be delivered for all draw-in collets with extended nose.
°
L
15
S
D
d
G
part no. ø d (mm) ø D (mm) length L (mm) thread G inside shape clamping range (mm) steps clamping length increments (mm)
a.A. / PR PR
a.A. / PR PR
a.A. / PR PR
a.A. / PR PR
a.A. / PR PR
PR = per request
S
D
d
G
L
part no. ø d (mm) ø D (mm) lenght L (mm) cone α (degree) thread G inside shape clamping range (mm) increments (mm)
All guide bushings available with enlarged guide area and oversize.
S
D
d
G
L
part no. ø d (mm) ø D (mm) length L (mm) cone α (degree) thread G inside shape clamping range (mm) increments (mm)
TD25 NS 22,0
T 223 28 34 82 16 M 27 x 1 22,0
TD32 S 33,0
33,0
3,0 - 25,0
All guide bushings also available In S-Slot design. Guide bushing also in SB available.
with BL-coating.
P
S
D
Z
part no. Channel ø D (mm) ø Z (mm) length L (mm) clamping range (mm)
CAV21 21 21 10 55 17 - 19
CAV34 34 25/34 16 76 19 - 31
P
S
D
Z
part no. Channel ø D (mm) ø Z (mm) ø P (mm) length L (mm) clamping range (mm) increments (mm)
Bechler D7 7 M4 30 PR PR
SHK 21 D 21 21 8 14 H 7 65 PR PR
SHK 22 D 22 22 8 14 H 7 65 PR PR
SHK 23 D 23 23 8 14 H 7 65 PR PR
P
S
D
Z
part no. Channel ø D (mm) ø Z (mm) ø P (mm) length L (mm) clamping range (mm) increments (mm)
P
S
D
Z
part no. channel ø D (mm) thread G lenght L (mm) clamping range (mm) increments (mm)
G
D
D
G
part no. channel ø D (mm) thread G length L (mm) clamping range (mm) increments (mm)
P
D
part no. ø D (mm) ø P (mm) length L (mm)
VKK 15 15,3 11 H 7 40
VKK 20 20,3 14 H 7 65
VKK 25 25,3 20 H 7 65 / 90
VKK 28 28,3 20 H 7 65 / 90
VKK 30 30,3 20 H 7 65 / 90
VKK 32 32,3 20 H 7 65 / 90
VKK 36 36,3 20 H 7 65 / 90
VKK 38 38,3 20 H 7 65 / 90
VKK 40 40,3 20 H 7 65 / 90
VKK 42 42,3 20 H 7 90
VKK 45 45,3 20 H 7 90
VKK 50 50,3 20 H 7 90
VKK 60 60,3 20 H 7 90
VKK 65 65,3 20 H 7 90
VKK 67 up to 100
D
Z
SHKI 7 7 M5 37 1,0
SHKI 10 10 4 7 40 1,0
SHKI 12 12 4 8 40 1,0
SHKI 15 15 6 11 40 1,0
SHKI 18 18 6 11 40 1,0
SHKI 20 20 8 14 65 1,0
SHKI 25 25 8 20 65 1,0
SHKI 28 up to SHKI 50 28 - 50 8 20 PR PR
PR = per request
P
D
part no. channel ø D (mm) ø P (mm) length L (mm) clamping range (mm) increments (mm)
SHT 28 D 28 28 20 H 7 90 PR PR
PR PR
SHT 34 D 34 34 20 H 7 90 PR PR
SHT 35 D 35 35 20 H 7 90 PR PR
SHT 38 D 38 38 20 H 7 90 PR PR
36,5 - 38,0 PR
40,5
SHT 44 D 44 44 20 H 7 90 PR PR
SHT 54 D 54 54 20 H 7 90 PR PR
SHT 55 D 55 55 20 H 7 90 PR PR
PR = per request
P
D
Sample collet with spring for reinforcement
part no. channel ø D (mm) ø P (mm) length L (mm) clamping range (mm) increments (mm)
58,0
SHT 63 D 63 63 20 H 7 90 PR PR
SHT 70 D 70 70 20 H 7 90 PR PR
SHT 75 D 75 75 20 / 35 H 7 90 PR PR
from 41,0 PR
PR = per request
All turbo-bar feed collets can be delivered in XT-version for XT-bar loaders.
P
D
part no. channel ø D (mm) ø P (mm) length L (mm) clamping range (mm) increments (mm)
SHTI 28 D 28 28 20 H 7 90 PR PR
SHTI 30 D 30 30 20 H 7 90 PR PR
SHTI 32 D 32 32 20 H 7 90 PR PR
SHTI 34 D 34 34 20 H 7 90 PR PR
SHTI 35 D 35 35 20 H 7 90 PR PR
SHTI 36 D 36 36 20 H 7 90 PR PR
SHTI 38 D 38 38 20 H 7 90 PR PR
SHTI 40 D 40 40 20 H 7 90 PR PR
SHTI 42 D 42 42 20 H 7 90 PR PR
SHTI 44 D 44 44 20 H 7 90 PR PR
SHTI 45 D 45 45 20 H 7 90 PR PR
SHTI 50 D 50 50 20 H 7 90 PR PR
SHTI 54 D 54 54 20 H 7 90 PR PR
SHTI 58 D 58 58 20 H 7 90 PR PR
SHTI 60 D 60 60 20 H 7 90 PR PR
SHTI 63 D 63 63 20 H 7 90 PR PR
SHTI 65 D 65 65 20 H 7 90 PR PR
SHTI 70 D 70 70 20 H 7 90 PR PR
SHTI 75 D 75 75 20 / 35 H 7 90 PR PR
SHTI 80 D 80 80 35 H 7 90 PR PR
SHTI 90 D 90 90 35 H 7 90 PR PR
PR = per request
D
Z
B
P
part no. manufacturer ø D (mm) ø B (mm) ø Z (mm) ø P (mm) entire length (mm)
B
P
part no. manufacturer ø D (mm) ø B (mm) ø P (mm) ø Z (mm) entire length (mm)
D 10 Traub 10,5 9 7 4 88
D 12 Traub 12,5 11 8 4 88
d
G
part no. manufacturer ø D (mm) threat G ø d (mm) entire length (mm)
D
G1
G2
part no. manufacturer ø D (mm) thread G 1 thread G 2 entire length (mm)
D5 Iemca 5,5 M4 M4 90
D
G1
G2
part no. manufacturer ø D (mm) thread G 1 thread G 2 entire length (mm)
7 TR LNS / Tryton 7 M5 M4 63
12 TR LNS / Tryton 12 M6 M6 72
7B Bechler 7 M5 M5 84
10 B (A) Bechler 10 M5 M5 84
10 B (B) Bechler 10 M5 M5 96
D
P
B
part no. ø P (mm) ø D (mm) ø B (mm) entirw length (mm)
D 25 20 25 20 196
D 30 20 30 25 196
D 32 20 32 25 196
D 34 20 34 30 196
D 36 20 36 30 196
D 38 20 38 30 196
D 40 20 40 33 206
D 42 20 42 33 206
D 44 20 44 33 206
D 45 20 45 33 206
D 50 20 50 42 206
D 54 20 54 42 206
D 55 20 55 42 206
D 58 20 58 51 231
D 60 20 60 51 231
D 63 20 63 51 231
D 65 20 65 51 231
D 70 20 70 51 231
D 75 20 / 35 75 65 231
D 80 35 80 65 231
D 90 35 90 65 231