Professional Documents
Culture Documents
Mounting Base and Light Modules for BA 9s Incandescent Bulb, Neon or LED These control stations use push buttons and pilot lights from the XB5 plastic operator range.
Screw Clamp Terminal Connections Control Stations Are Composed of Specifications
Operators/Pilot lights Protection: IP65 and NEMA Type 4X
Stock Mfr.’s Power Light Supply Base of Enclosure (With Mounting Plate) Approvals: CE, UL Listed, CSA Certified
EACH Contact Block and Light Module Combinations Material: Polycarbonate, Light Gray RAL 7035 and Dark
No. Type Supply Source Voltage
Legends Gray RAL 7016
226-0137 ZB4BV6 Direct Supply BA 9s Bulb, 2.4 W Max.* ≤250 V 33.81 Cable Entries: Knock-Outs for No. 13 (CM 12, PG 13.5)
226-0138 ZB4BV3 Xfmr. Type, 6 V Sec. BA 9s Incand. Bulb 110-120 VAC 80.93 Cable Glands and Tapped ISO 20
Cover Screws: Stainless Steel, Tightening Torque 2 Nm
*Not included.
Stock Mfr.’s Button Contact Legend
PASSIVE & ACTIVE
BA 9s Bulbs for Incandescent Light Modules No. Type Description Type Type Text EACH
Stock Mfr.’s 226-0755 XALD101 1 Momentary Push Button Flush Black 1-NO Start 57.07
Description Characteristics EACH
No. Type 226-0757 XALD211 2 Momentary Push Buttons 1 Flush Black, 1-NO, Start/ 57.07
1 Flush Red 1-NC Stop
226-0139 DL1CB006 Incandescent Bulb 6 V, 1.2 W 8.50 226-0758 XALD221 2 Momentary Push Buttons 2 Flush Black 2-NO Forward/ 57.07
226-0140 DL1CE012 Incandescent Bulb 12 V, 2 W 7.94 Reverse
226-0141 DL1CE024 Incandescent Bulb 24 V, 2 W 8.92 226-0759 XALK174 1 Mushroom Head Push Button Standard 1-NC — 87.11
226-0142 DL1CE130 Incandescent Bulb 120-130 V, 2.4 W 8.92 40 mm, Red Turn to Release
226-0143 DL1CF110 Neon Bulb 120-130 V 12.38 226-0760 XALK194 1 Mushroom Head Push Button Standard 1-NC — 73.72
40 mm, Red Push-Pull
226-0889 ZENL1111 Std. Contact Block — NO — 1-NO — 12.98
226-0890 ZENL1121 Std. Contact Block — NC — 1-NC — 12.83
ASSEMBLY
1060