Professional Documents
Culture Documents
DISPLAY SCREEN
2B1L & 2B2L
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 1
Course Module: ITC.224.2
Contents
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 2
Course Module: ITC.224.2
Objectives
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 3
Course Module: ITC.224.2
On Screen Information
• The normal screen changes the display content according to the truck status and settings.
• Hour meter, turning direction and some options can be set to display on normal screen.
No. Description:
6. Parking brake
7. Clock
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment.
4
Course Module: ITC.224.2
Press > 3s
Default: 0000
Master: 7105
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 5
Course Module: ITC.224.2
User Settings
Normal Screen Operation Result (Main Screen) Sub-Screen & Details Screen
Key START
Day: 7 days is
recorded and
displayed from
screen No. 1/7 to
screen No. 7/7.
Press
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 6
Course Module: ITC.224.2
User Settings
Normal Screen Operation Result (Main Screen) Sub-Screen & Details Screen
Key START
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 7
Course Module: ITC.224.2
User Settings
Screen Main screen items Scree Sub screen item Detail screen
No. n No.
1/2 FEEL SETTING 1/2 P: Power
N: Normal
C: Custom C01-C10
2/2 C: Check Custom ATT1/ ATT2/ ATT3 is displayed only when the
attachment (Optional) is installed.
DISPLAY SETTING 1/2 Standard
Clock
Hour Meter
2/2 Speed Meter
Steering Direction
Load Wt. Gauge Load weight indicator [Optional]/ Selection of main
meter panel
- Brightness
- Display Mode Color invert/ Negative/ Positive
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 8
Course Module: ITC.224.2
User Settings
Screen Main screen items Scree Sub screen item Detail screen
No. n No.
1/2 SPEED LIMIT - Initial value: 5km/h; setting range: 2 to 13km/h.
CLOCK SETTING - Date structure and time zone display setting.
2/2 TARE SETTING - SET TARE (load weight indicator) “0” adjustment.
[OPTIONAL]
- RESET Resetting the tare setting value.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 9
Course Module: ITC.224.2
User Settings
Screen Main screen items Scree Sub screen item Detail screen
No. n No.
2/2 PITCHING CONTROL 1/2 OFF
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 10
Course Module: ITC.224.2
Manager Settings
Press > 3s
Default: 0000
Master: 7105
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 11
Course Module: ITC.224.2
Manager Settings
Demonstrate C01 setting only. Remaining C02 – C10 did not show here.
The setting method of “SPEED ALARM” is the same as that of “SPEED LIMIT”.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 12
Course Module: ITC.224.2
• In case, truck equipped with Simple Pin Code Entry(PASS), the manager screen will be difference to truck
without such option.
• “PERSONAL SETTING” is indicated instead of “FIXED FEELING”. Therefore, additional setting can be found
as well.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 13
Course Module: ITC.224.2
Screen Introduction Sub- Screen Screen Details Screen Setting Range/ (Initial
No. Value)
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 15
Course Module: ITC.224.2
• Alternately, CUSTOM FEELING settings can be overview and set easily using Trucktool.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 16
Course Module: ITC.224.2
Service Screen
Hold and
press the following:
Default: 0000
Master: 7105
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 17
Course Module: ITC.224.2
Service Screen
Service Screen(Main
Description:
item)
Enables you to perform various settings related to the truck,
Setting TRV/HYD/PS systems, charging, options, and the
maintenance timer.
Monitor input and output(I/O) status of TRV/HYD/PS/OPT
Monitor controllers.
See the software version of each controller.
View the 10 most recent errors and all the errors recorded
Error History
in each controller.
Enables you to calibrate or adjust the functions needed to
Calibration
control the truck.
Enables you to delete error records and initialize the Setting
Initialize
data.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 18
Course Module: ITC.224.2
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 19
Course Module: ITC.224.2
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 20
Course Module: ITC.224.2
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 21
Course Module: ITC.224.2
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 22
Course Module: ITC.224.2
• Key switch is at “ON” position and the truck is left for more than setting
time(15 minutes) without any operation, the truck automatically turns off.
• Most importantly, there are 2 conditions must be for truck to prepare Power-Off Control. Normal screen, while sitting in
i. Sitting in the seat the seat, or left the seat.
30 seconds to go down
(Start to count down)
Mode In Display
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 24
Course Module: ITC.224.2
Questions?
Thank you.
© 2020 by MLAP. All Rights Reserved. All registered trademarks are the property of their respective owners.
Some products may be shown with optional equipment. 25