Professional Documents
Culture Documents
Overview Features
MPT951 photo-thermal detector
The MDB800 Menvier conventional base has been • Quick and simple to install
specifically designed to be compatible with the • Separate zone in and zone out
terminals
Menvier range of conventional detectors.
• Stand off fixing feature
• Selectable detector locking
This standard base has been designed for flexibility,
simplicity and speed of installation.
Benefits
It incorporates purpose designed devices to provide
fault warning if detector is removed whilst • Accepts side entry surface
maintaining full zone wiring integrity. cables
• Common base for Menvier
The base has a spring contact switch and a parallel conventional detectors
zener diode to enable fault monitoring.
Dia
Standard Connection
+ VE
+
remote indicator (optional)
Menvier Conventional
+ LED
4 4
ZONE
2 E 2 E
- 3 3
- VE
WARNING:
If using the outer connection on terminal 2, ensure the operation of the switch is not impeded
and that there are no shorts between terminal 2 and the switch contact - use sleeves for end
of line resistor. Ensure that cable or end of line resistor leg does not short onto the contact.
Product Codes
Code Description
MDB800 Conventional standard base
MDB800*10 Conventional standard base (pack of 10)
CIR301 Conventional remote indicator
Cooper Lighting and Safety Ltd, Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB. UK.
T: +44 (0) 1302 303350 l F: +44 (0) 1302 303332 l E: techsupport@cooperfire.com l W: www.cooperfire.com