Professional Documents
Culture Documents
Auto Cad
Auto Cad
The tool used to drive a slotted screw head is called a standard, common blade, flat-
blade, slot-head, straight, flat, flat-tip, or "flat-head" screwdriver. This last usage can
be confusing, because the term flat-head also describes a screw with a flat top,
designed to install in a countersunk hole. at head screwdrivers also known as slotted
screwdrivers are the most common of all the screwdrivers and have a basic design
that has been around for centuries. Flat head screwdrivers have a single blade with
a straight flat tip that corresponds to the slot in the head of a slotted screw. Flat-head
(slotted) screws are often considered the "junk" of screw heads, but one place they
are slightly advantageous is wet applications. You can set the slot vertically, so it will
drain out, instead of holding water. This can increase the life of the screw and the
wood behind it.
DRAWING PROCESS/COMMAND:
NO PART EXPLANATION
1 USING DRAWING TOOLS:
-LINE 30 X4
-LINE 6