Professional Documents
Culture Documents
Pipe Flows
Pipe Flows
PIPE
SYSTEMS
Engr. Bredith Grace B. Bucton
Instructor
Outline
▪ Pipe Flow
▪ Continuity Equation
▪ Momentum Equation
▪ Energy Equation
▪ Head Losses
▪ Due to friction
▪ Due to connections, bends, valves
2
Pipe Flow
Pipe flow
- flow in closed conduits
- flowing fluid completely filling the conduit
Discharge, Q
- pipe flow at any location along the pip
- may be described by the pipe cross section (A),
elevation (h), pressure (p), and flow velocity (V) in
the pipe
𝑄 = 𝑉𝐴
Engineering Applications
Water Supply Systems Elevation, h
Stormwater Drains - usually measured with respect to a horizontal
Irrigation Water Distribution Systems reference datum (such as the mean sea level)
3
Pipe Flow
Continuity Equation
- For incompressible, steady flow,
the continuity equation simply states
that the volumetric flow rate, Q,
across any surface normal to the
flow is constant.
𝑉1 𝐴1 = 𝑉2 𝐴2 = 𝑄
4
Pipe Flow
Momentum Equation
- Conservation of Momentum
- based on Newton’s Law of Motion (change in momentum flux between two sections
= sum of forces on the fluid causing the change)
Σ𝐹Ԧ = 𝜌𝑄 𝑉2 − 𝑉1
5
Pipe Flow
Example:
The horizontal nozzle shown discharges 0.01 m3/s of water into the air. The supply pipe’s diameter (dA
= 40 mm) is twice as large as the nozzle diameter (dB = 20 mm). The nozzle is held in place by a hinge
mechanism. Determine the magnitude and direction of the reaction force at the hinge, if the gauge
pressure at A is 500,000 N/m2. Assume the weight supported by the hinge is negligible.
dA = 40 mm
PA = 500,000 N/m2
F=?
Q = 0.01 m3/s
dB = 20 mm
6
Pipe Flow
dA = 40 mm Q = 0.01 m3/s
Example:
PA = 500,000 N/m2
𝑚3
0.01
𝑠
𝑉𝐴 = 𝑄/𝐴𝐴 = 𝜋
(0.04𝑚)2
4
𝑉𝐴 = 7.96 𝑚/𝑠
dB = 20 mm
𝑁 𝜋 F=?
𝐹𝑥,𝐴 = 𝑃𝐴𝐴 = 500,000 2 (0.04𝑚)2
𝑚 4
𝐹𝑥,𝐴 = 628.32 𝑁
𝐹𝑦,𝐴 = 0 𝑚
𝑉𝑥,𝐵 = 31.831 cos60° Atmospheric
𝑚3 𝑠
0.01 𝑉𝑥,𝐵 = 15.92 𝑚/𝑠 Pressure
𝑠
𝑉𝐵 = 𝑄/𝐴𝐵 = 𝜋
(0.02𝑚)2 𝑚 𝐹𝑥,𝐵 = 0
4 𝑉𝑦,𝐵 = 31.831 sin60°
𝑠
𝑉𝐵 = 31.831 𝑚/𝑠 𝑉𝑦,𝐵 = 27.57 𝑚/𝑠 𝐹𝑦,𝐵 = 0
7
Pipe Flow 𝑽𝑨 = 𝟕. 𝟗𝟔 𝒎/𝒔
dA = 40 mm Q = 0.01 m3/s
Example: 𝑭𝒙,𝑨 = 𝟔𝟐𝟖. 𝟑𝟐 𝑵
PA = 500,000 N/m2 𝑭𝒚,𝑨 = 𝟎
(→ +)
Σ𝐹𝑥 = 𝜌𝑄 𝑉𝑥,𝐵 − 𝑉𝑥,𝐴
𝐹𝑥,𝐴 − 𝐹𝑥 = 𝜌𝑄 𝑉𝑥,𝐵 − 𝑉𝑥,𝐴
𝑘𝑔 𝑚3 𝑚 dB = 20 mm
628.32 𝑁 − 𝐹𝑥 = 998 3 0.01 15.92 − 7.96
𝑚 𝑠 𝑠 F=?
𝑭𝒙 = 𝟓𝟒𝟖. 𝟖𝟖 𝑵 (←)
(↑ +)
Σ𝐹𝑦 = 𝜌𝑄 𝑉𝑦,𝐵 − 𝑉𝑦,𝐴 Magnitude of the
Resultant Force? 𝑭 = 𝟔𝟏𝟐. 𝟐𝟓 𝑵
−𝐹𝑦 = 𝜌𝑄 𝑉𝑦,𝐵
𝑘𝑔 𝑚3 𝑚 Direction of the 𝑽𝒙,𝑩 = 𝟏𝟓. 𝟗𝟐 𝒎/𝒔
−𝐹𝑦 = 998 3 0.01 27.57 Resultant Force? 𝜽 = 𝟐𝟔. 𝟑𝟎° 𝑽𝒚,𝑩 = 𝟐𝟕. 𝟓𝟕 𝒎/𝒔
𝑚 𝑠 𝑠
𝑭𝒙,𝑩 = 𝟎
𝑭𝒚 = 𝟐𝟕𝟏. 𝟐𝟓 𝑵 (↓) 𝑭𝒚,𝑩 = 𝟎
8
Pipe Flow Here is a video illustrating these different “heads”:
https://www.youtube.com/watch?v=CxqM_kkwgU4
Energy Equation
- Water flowing in pipes contain energy in various forms
- major portion contained as: (1) kinetic energy, (2) potential energy, and (3) pressure energy
𝑉12 𝑃1
𝐻1 = + + ℎ1
2𝑔 𝛾
𝑉22 𝑃2
𝐻2 = + + ℎ2
2𝑔 𝛾
9
Pipe Flow
Energy Equation
- Water flowing in pipes contain energy in various forms
- major portion contained as: (1) kinetic energy, (2) potential energy, and (3) pressure energy
𝑉12 𝑃1
𝐻1 = + + ℎ1
2𝑔 𝛾
𝑉22 𝑃2
𝐻2 = + + ℎ2
2𝑔 𝛾
𝑉12 𝑃1 𝑉22 𝑃2
+ + ℎ1 = + + ℎ 2 + ℎ𝐿
2𝑔 𝛾 2𝑔 𝛾
𝒉𝑳 = head loss
10
Pipe Flow
Energy Equation
- Water flowing in pipes contain energy in various forms
- major portion contained as: (1) kinetic energy, (2) potential energy, and (3) pressure energy
11
Head Loss
Friction Head Loss, hf
- loss of head caused by pipe wall friction and the viscous dissipation in flowing water
- also referred to as a “major loss” due to its magnitude
12
Head Loss
Friction Head Loss, hf
- formula for estimation (SI units):
Darcy-Weishbach Equation
𝑳 𝑽𝟐 where
𝒉𝒇 = 𝒇 f = friction factor
𝑫 𝟐𝒈 (Moody Diagram)
Manning Equation
where
𝒏𝟐 𝑳𝑽𝟐 n = Manning
𝒉𝒇 = 𝟔. 𝟑𝟓 𝟒 roughness
𝑫𝟑 coefficient
Hazen-Williams Equation
𝟏.𝟖𝟓 where
𝑳 𝑽
𝒉𝒇 = 𝟔. 𝟖𝟐 CH = Hazen-Williams
𝑫𝟏.𝟏𝟕 𝑪𝑯 roughness coefficient
13
Head Loss
𝑉𝐷
𝑁𝑅 =
𝜈
where
NR = Reynolds
Number
V = Flow velocity
D = Pipe diameter
ν = kinematic viscosity
of water
14
Head Loss
15
Head Loss
Local Head Losses, hm
- additional head losses due to flow through pipe fittings, around bends, and through
changes in pipeline geometry
- sometimes also referred to as a “minor losses”
𝑉2
ℎ𝑚 = 𝐾
2𝑔
16
Head Loss
1. Due to Pipe Contractions, hc
𝑽𝟐𝟐
𝒉𝒄 = 𝑲𝒄
𝟐𝒈
17
Head Loss
2. Due to Pipe Expansion, hE
(𝑽𝟏 − 𝑽𝟐 )𝟐
𝒉𝑬 =
𝟐𝒈
18
Head Loss
3. Due to Pipe Entrance, he
𝑽𝟐
𝒉𝒆 = 𝑲𝒆
𝟐𝒈
19
Head Loss
4. Due to Pipe Exit, hd 5. Due to Pipe Bends, hb
𝑽𝟐
𝒉 𝒅 = 𝑲𝒅
𝟐𝒈 𝑽𝟐
𝒉𝒃 = 𝑲𝒃
𝟐𝒈
*Pipe manufacturers are more then willing to supply prospective buyers with loss coefficients.
𝑲𝒅 = 𝟏. 𝟎
20
Head Loss
6. Due to Pipe Valves, hv
𝑽𝟐
𝒉𝒗 = 𝑲𝒗
𝟐𝒈
21
Head Loss
Example:
The figure below shows two pipe sections in series that transport water from a reservoir and discharge
it into air through a rotary valve at a location 100m below the water surface elevation. If the square-
edged connections are used, what is the discharge?
Ke = 0.5
f = 0.018 Kc = 0.35
f = 0.0225
22
Head Loss
Solution:
he hc hv
Ke = 0.5
Datum
f = 0.018 Kc = 0.35
f = 0.0225
hf1
hf2
23
Head Loss
ℎ𝐿 = ℎ𝑒 + ℎ𝑓1 + ℎ𝑐 + ℎ𝑓2 + ℎ𝑣
Solution:
he hc hv
Ke = 0.5
Datum
f = 0.018 Kc = 0.35
f = 0.0225
hf1
hf2
24
Head Loss 𝑉1 𝐴1 = 𝑉2 𝐴2
Solution:
𝑉12 𝑉22 𝜋 2
𝜋
ℎ𝐿 = 45.5 + 145.35 (0.40𝑚) 𝑉1 = (0.20𝑚)2 𝑉2 𝑉1 = 0.25𝑉2
2𝑔 2𝑔 4 4
𝑉22
ℎ𝐿 = 148.194
2𝑔
he hc hv
Ke = 0.5
Datum
f = 0.018 Kc = 0.35
f = 0.0225
hf1
hf2
25
Head Loss
Solution:
𝑣22 𝑉22 𝑉22
ℎ𝐿 = 148.194 + 148.194 = 100𝑚 𝑉22 = 13.15 𝑉2 = 3.63 𝑚/𝑠
2𝑔 2𝑔 2𝑔
𝑉32
+ ℎ𝐿 = 100𝑚
2𝑔
he hc hv
Ke = 0.5
Note: 𝑉2 = 𝑉3
Datum
f = 0.018 Kc = 0.35
f = 0.0225
27
References
Houghtalen, R.J., Akan, A.O., and Hwang, N.H.C. (2010) Fundamentals of Hydraulic Engineering
Systems, Pearson Higher Education, Inc.
28