Professional Documents
Culture Documents
Operating Limits
• pH 6.5 to 8.5
• Suction lift upto 8m
• Liquid temp upto 40°C
• Ambient Temperature upto 40°C
• Max. working pressure 6 bar
• Voltage Fluctuation < 10% of rated value
The PERI series are peripheral pumps, suitable • Pump Casing : Cast Iron
for transferring water without abrasive particles • Impeller : Brass
or clean water. They have relatively simple
• Shaft : Steel #45
construction and are very economical, reliable
• Insulation Class B
and safe. It is widely used for household and
domestic applications such as water supply from • Protection : IP44
wells and pools, pressure boosting, garden • Built in Thermal Protector
sprinkling, washing booths etc. Pumps should be • Optional material and features are available
installed in a covered area, protected against the on request
weather.
• Small Size, High Pressure
Performance Data
Operating Limits
• pH 6.5 to 8.5
• Suction lift upto 7m
• Liquid temp upto 40°C
• Ambient Temperature upto 40°C
• Max. working pressure 6 bar
• Voltage Fluctuation < 10% of rated value
The CENTRI series are single suction centrifugal • Pump Casing : Cast Iron
pumps with high efficiency, suitable for • Impeller : Brass
transferring water without abrasive particles or
• Shaft : Steel #45
clean water. It is widely used for household and
• Insulation Class B
domestic applications such as water supply from
wells and pools, pressure boosting, garden • Protection : IP44
sprinkling, washing booths etc. Pumps should be • Built in Thermal Protector
installed in a covered area. • Optional material and features are available
• High head, Small to medium flow rate on request
Performance Data
Operating Limits
• pH 6.5 to 8.5
• Suction lift upto 7m
• Liquid temp upto 40°C
• Ambient Temperature upto 40°C
• Max. working pressure 3 bar
• Voltage Fluctuation < 10% of rated value
The CENTRO series are single suction • Pump Casing : Cast Iron
centrifugal pumps with high efficiency, suitable • Impeller : Brass or Cast Iron
for transferring water without abrasive particles
• Shaft : Steel #45
or clean water. It is widely used for farm
• Insulation Class B (upto 3HP)
irrigation, garden irrigation, general water supply
etc. Pumps should be installed in a covered • Insulation Class F (4HP-10HP)
area, protected against the weather. • Protection : IP44
• Built in Thermal Protector
• Optional material and features are available
Performance Data
Operating Limits
• pH 6.5 to 8.5
• Sand content 0.01%
• Liquid temp + 35°C
• Ambient Temperature < 40°C
• Maximum Immersion upto 20m
• Minimum well diameter 5 inch
Performance Data
1 Phase Inch HP 1ph / 3ph (m3/hr) (m) (m) (m) (mm) (kG) 20’Load
AMA 120 1.25” 1.2 1/3 4.5 76.5 32.5-76.5 20 720x140x230 20 1150