You are on page 1of 1

Student’s details Formative feedback given Summative feedback Grade

MICHEL BANUKA KAPURUGE Part 1 a, wrong, consider beam weight as the Part 1 a, Obtained shear force diagram and bending F
distributed load moment diagram are wrong, consider the beam
M19991002009 weight as a distributed load acting all over the beam.
Part 4, b wrong
Part 4,b is correct
Few mistakes, anyhow go through the report again
and check any mistakes
SHARANYA SUBHANJANA Part 1, c, missing in your report F
SHEELADITHYA ATHAPATTHU Part 1, d, calculation details are not given, please give
details how did you found the shear modules.
M19991206007 Part 2 a, calculation is wrong
Part 3 a, iii,iv missing in your report
Part 3, f not clear
Part 4 a,b missing in your report

W.G Hansika Isuru Gunathilake Part 1 a, incomplete and wrong, Part 1 c,iii answer is You have submitted the same assignment as you F
wrong,Part 1 d,e missing in your report, Part 2 c,d submitted in formative submission
M20010603001 missing, Part 3 a, holding torque calculation is
wrong No corrections done

Part 3 f, should be more descriptive

Part 2 d,e,f missing in your report

Part 4 b wrong

Report format is poor

This Assignment contain many mistakes and errors


only some of the mistakes are listed above

You might also like