This document compares the chemical composition and mechanical properties of two steel grades: JIS G 3314 SA1E and JIS G 3314 SA1D. Both grades have maximum limits for carbon, silicon, manganese, sulfur, and phosphorus, as well as a minimum requirement for tensile strength of 270 MPa. JIS G 3314 SA1E has a minimum elongation of 38% for thicknesses over 1mm, while SA1D requires a minimum elongation of 34% for thicknesses over 1mm. Coating details are not provided.
This document compares the chemical composition and mechanical properties of two steel grades: JIS G 3314 SA1E and JIS G 3314 SA1D. Both grades have maximum limits for carbon, silicon, manganese, sulfur, and phosphorus, as well as a minimum requirement for tensile strength of 270 MPa. JIS G 3314 SA1E has a minimum elongation of 38% for thicknesses over 1mm, while SA1D requires a minimum elongation of 34% for thicknesses over 1mm. Coating details are not provided.
This document compares the chemical composition and mechanical properties of two steel grades: JIS G 3314 SA1E and JIS G 3314 SA1D. Both grades have maximum limits for carbon, silicon, manganese, sulfur, and phosphorus, as well as a minimum requirement for tensile strength of 270 MPa. JIS G 3314 SA1E has a minimum elongation of 38% for thicknesses over 1mm, while SA1D requires a minimum elongation of 34% for thicknesses over 1mm. Coating details are not provided.
Chemical composition C% 0.10 Max 0.12 Max Si% _ _ Mn% 0.45 Max 0.50 Max S% 0.030 Max 0.040 Max P% 0.30 Max 0.040 Max Tensile strength 270 Min 270 Min 38% Min(For thickness > Elongation 34 % Min ( For thickness > 1mm) 1mm)
Details Not provided. Details Not provided. Please get
Coating : Please get it it
Minimum coating thickness, Total Both surface g/m2 ( Triple spot)
Minimum coating thickness, Total Both surface g/m2 ( single spot)