Professional Documents
Culture Documents
Selecting All the [BFX], [MFX], or [MUTE] Buttons Using the TONE Knobs for Direct Editing
Operation Explanation [PAN] button + each [TONE FX] knob
Specifies direct editing for each channel’s pan.
[GAIN] + [BFX], [GAIN] + [MFX],
Select all
[GAIN] + [MUTE], [GAIN] + pad (1–16)
[AUX] button + each [TONE FX] knob
[PAN] + [BFX], [PAN] + [MFX],
De-select all Specifies direct editing for each channel’s AUX SEND level.
[PAN] + [MUTE], [PAN] + pad (1–16)
[TONE] + [BFX], [TONE] + [MFX],
Select only one [BFX] button + each [TONE FX] knob
[TONE] + [MUTE]
Specifies direct editing for each channel’s BFX DEPTH level.
[AUX] + [BFX], [AUX] + [MFX],
De-select only one
[AUX] + [MUTE]
[FADER] + [BFX], [FADER] + [MFX],
[FADER] + [MUTE], [FADER] + pad (1–16)
Invert selection
Clearing a COMBI Pattern
* The 16 pads are available only a BEAT FX pattern is displayed.
[PAN] button + [COMBI] button
* Shortcuts for the [SELECT] button are listed in the owner’s manual. Note that the method
of operation is different. or [PAN] button + each [EFFECT] button + pad (1–16)
Clears the currently selected COMBI pattern.
* Undo is not possible, since the pattern is overwritten.